What should I do if my van fails to undergo annual inspection?

If the van has not been inspected for more than three years, it must pay the fine and promptly go to the vehicle management office for annual inspection. If it exceeds three years, the van will be forcibly scrapped.

The "Road Traffic Safety Law of the People's Republic of China" stipulates:

Article 13 Motor vehicles that are driven on the road after registration shall be subject to laws and administrative regulations. According to the regulations, safety technical inspections shall be carried out regularly according to different situations such as the purpose of the vehicle, the number of passengers and cargo carried, the service life, etc. If a motor vehicle driving license and a compulsory motor vehicle third-party liability insurance policy are provided, the motor vehicle safety technical inspection agency shall inspect them, and no unit shall attach other conditions. For vehicles that meet the national safety technical standards for motor vehicles, the traffic management department of the public security organ shall issue an inspection certificate.

The "Standard Regulations on Compulsory Scrapping of Motor Vehicles" stipulates:

Article 4: A registered motor vehicle shall be compulsorily scrapped under any of the following circumstances, and its owner shall The scrapped motor vehicle is sold to a scrapped motor vehicle recycling and dismantling enterprise, which will register, dismantle, and destroy the scrapped motor vehicle in accordance with regulations, and submit the scrapped motor vehicle registration certificate, number plate, and driving license to the traffic management department of the public security organ. Cancellation:?

The fourth point? Failure to obtain the motor vehicle inspection mark within three consecutive motor vehicle inspection cycles after the expiration of the inspection validity period.

Extended information

The "Motor Vehicle Safety Technical Inspection Items and Methods" stipulates:

6.1.1.2 When inspecting a motor vehicle, submit the motor vehicle for inspection The license plate number/vehicle type and vehicle brand/model should be consistent with the content of the motor vehicle license endorsement.

6.1.2.2 When using a motor vehicle for inspection, the vehicle identification number (or vehicle factory number) of the motor vehicle submitted for inspection should be consistent with the content endorsed on the motor vehicle driving license, and should not appear to have been altered. , digging, polishing, re-engraving without authorization, etc.

6.4.4.1 Tires should meet the following requirements:

Tires of the same model, specification and pattern should be installed on both sides of the coaxial axis, and tire bolts and half-axle bolts should be complete and tight; The tire specifications should be consistent with the motor vehicle product announcement and the motor vehicle factory certificate (for in-use motor vehicle inspection, the motor vehicle registration information).

6.8.1.2 For full trailers and semi-trailers, when testing the no-load braking performance in Taiwan, the following requirements should be met at the same time:

(a) Vehicles combined with tractors The train inspection results comply with the relevant requirements of 7.11.1 in GB 7258-2012;

(b) The ratio of the sum of the trailer’s axle braking force to the sum of the trailer’s axle load is greater than or equal to 55%.

Zhejiang Government Service Network-Road Traffic Safety Law of the People's Republic of China

Ministry of Commerce of the People's Republic of China-Compulsory scrapping standards for motor vehicles