Why did Apple's 5S fail to send MMS?

How can Apple fail to send MMS in 5S? You need to set it up. Settings-Cellular Mobile Network-Cellular Mobile Data Network.

According to the content on my mobile phone, it should be no problem to fill in the following:

Cellular mobile data

APN: cm

Xiakongkong

Multimedia message

APN:cmwap

User name: empty

Password: empty

MMSC::mmsc.monter

MMS agent: 10.0.0. 172:80

Why can't Apple 6splus send MMS? It should be caused by the wrong setting of the mobile phone. Suggestions can be set according to the following parameters. Parameter setting tutorial of iphone6s Plus MMS:

Open Settings-> Cellular Mobile Network > Cellular Mobile Data Network >: MMS in turn, and set it according to the following information to distinguish between mobile and Unicom:

1, China Mobile

APN:cmwap

User name: Not required.

Password: No need.

MMSC::mmsc.monter

MMS DA1L1:10.0.172

Maximum MMS size: 50,000 optional.

Others can be left blank.

2. China Unicom

APN:uniwap

User name: Not required.

Password: No need.

MMSC::mmsc.unir ..

MMS DA1L1:10.0.172

Maximum MMS size: 102400 optional (in case the MMS is too large to send).

Others can be left blank.

Why can't Apple 4S send MMS? See if the option of Settings-Messages-Sending and Receiving MMS is turned on.

Apple 5S, why failed to send MMS? The answer needs to be set first: click desktop settings to enter the general network, click "Cellular Data Network" and then set APN:CMNET User Name: (not filled in) Password: (not filled in) MMS APN:CMWAP User Name: (not filled in) Password: (not filled in) MMSC: mmsc. Montenegro MMS Da 1L65438. There is also the need to open MMS in general SMS!

Why did Apple 6splus fail to send MMS? 1, Settings-SMS-Send and receive MMS. Turn off this function and MMS cannot be sent.

2. The sim network of the mobile phone is closed, and MMS cannot be sent.

3. The MMS function of the mobile phone is set incorrectly, so MMS cannot be sent.

How to send MMS to Apple 6splus?

1. Select "Settings" to enter the setting interface;

2. Enter the setting interface and select "General";

3. Select "Network" in the general menu;

4. Enable "Cellular Data" in the network menu;

5. Find the option of MMS and fill in all the data of MMS.

6. Restart the SMS program after setting the MMS;

Method 1: Use the flight mode as shown in the figure below, click the switch once, wait for a moment, turn off the functions such as mobile phone, SMS and network, and then click the switch again to turn off the flight mode, thus completing the soft restart of the program.

Method 2: Click the power switch of the mobile phone, turn it off and then turn it on.

7. After restarting, pull the settings to the bottom and you will see the "SMS" option. After entering, find the MMS switch and turn it on.

How to send an iphone MMS failed? The settings may be incorrect. The steps are as follows:

Click Settings on the menu.

Click General, Network, Cellular Data Network.

Fill in the information item by item as follows:

APN:cmwap

MMSC:: Monte

MMS agent: 10.0.0. 172

Maximum MMS size: 5000 pieces

Return to the "General" interface, click "Information", and then set the following three items to open.

Return to the setting interface again, then click to turn on "Flight Mode", wait a moment, and then turn off "Flight Mode" (it is recommended to turn it off before turning it on).

Why did Apple 4s fail to send MMS? Before sending and receiving MMS, you need to make the necessary settings. The setting method is as follows:

① On the main interface of iPhone4s, click Settings → General → Network in turn to turn on "Enable 3G" and "Cellular Data".

② Click "Cellular Data Network".

③ Unicom's network settings are preset, so you can send and receive MMS directly without any operation. However, if your Unicom cannot send and receive MMS, please make the following settings in the "Cellular Data" interface:

Set "APN" in the cellular data column to "3G";

Set "APN" under "MMS" to "3G WAP";

Set "MMSC" to: mmsc.myuni../;

Set the MMS Agent to 10.0. 172: 80, and set the Maximum MMS Size to 5000.

Tip: How to set up China Mobile?

Set "apn" in my wind data column to "cm";

Set "apn" under "MMS" to "cmwap"

Set "mmsc" to: mmsc.monter；;

Set the MMS proxy to "10.0. 172" and set the maximum MMS size to "5000".

④ Click Network → General → Settings to return to the Settings page.

⑤ Click "Information" on the "Settings" page.

⑥ At this point, the iphone MMS function has been turned on.

Then, you can send and receive MMS with iphone.

What should I do if Apple 5 fails to send MMS? Hello,

It is recommended to enter Settings-General-Restore-Restore network settings. If the problem is not solved, it is recommended to restore all settings.

Hope to adopt, thank you.

Why does sending MMS to Apple fail? Hello, I suggest you check the following steps:

1 Check whether SMS sending and receiving are normal or whether the number of SMS center is correct. (Telecom version does not need to set SMS center number)

2 Turn on the option of always receiving MMS. (System Settings >> "All Settings" > >; "mobile network" > >; "Always accept MMS")

Ask the operator whether to open the mobile Internet service. MMS can only be sent successfully if it has the function of "surfing the Internet by mobile phone", but it will not generate traffic charges, and operators will charge according to the number of messages.

4 Whether the selected attachment is too large, operators generally have strict size restrictions on the pictures sent by MMS. Please consult the operator for details.

I suggest you change the sim card of different operators and try to send it.

It is recommended that you back up your data, then empty all data and try sending again.