【 Principle of hot water kettle 】 Working principle and troubleshooting of hot water kettle

Hot water kettle is one of the common appliances in our life, which provides us with great convenience. A hot kettle is a kind of heating appliance. It often works at high temperature and often heats water, and it is also in a wet state. Because of the working environment, the hot water kettle often breaks down. So how to solve the problem when the hot water kettle is broken?

Working principle of hot water kettle

First of all, if we want to solve the problems related to the hot water kettle, we must know its working principle in advance. The electric kettle is mainly composed of a power connector, a steam induction controller, a kettle body, a heater and an anti-dry temperature controller. Like most heating appliances, electric kettle mainly relies on large resistance to generate heat to heat water. The kettle body and the power supply are independent, but connected with each other. When heating, the power supply is turned on, and the pot body part begins to work. When the water boils, the electric kettle will automatically turn off the power supply to avoid waste or danger caused by boiling water. If you use high-power heating, you can boil a pot of water in just a few minutes, and at the same time, it also has the protection of ultra-high temperature and anti-dry burning, as well as the function of automatic temperature control, all of which ensure that the electric kettle can work normally when heating.

What if it breaks?

Understand the basic working principle of the electric kettle, so what should I do when the electric kettle fails?

The 1. indicator light is not on, so it is impossible to heat and boil water.

If the indicator light is not on when the electric kettle is connected to the power supply and the water cannot be heated normally, first check whether the voltage input is normal and whether the plug is firmly inserted. If the electric kettle has voltage input and the plug has been inserted into the socket normally, continue to check the heating pipe. Generally speaking, when there is a voltage input but it doesn't work, it is basically a heating pipe failure.

2. The hot water kettle is leaking

Everyone should know that electric leakage is a very dangerous thing. If not handled in time, users will get an electric shock. There are three main reasons for the leakage. First, the heating pipe is faulty, second, the connection is loose, and third, water enters the pot and causes water leakage. When leakage occurs, we should first disconnect the voltage input and unplug it, and then check the cause of the fault step by step.

After the water is boiled, the power will not stop.

It is also very dangerous for water to boil without electricity, which not only wastes electric energy, but also leads to the rupture of the kettle or the overflow of water due to the accelerated movement of boiling water, which is easy to lead to electricity leakage and electric shock for users. The main reason for this phenomenon is the failure of the reset switch, which is usually caused by the deformation of the temperature sensor or the obstruction of the switch connecting rod. The deformation of the temperature sensor needs to restore the shape of the temperature sensor, and the related obstacles need to be removed to push the connecting rod to make the operation of the connecting rod coherent.

A kettle is an electric appliance that heats water with electricity. We need to pay special attention to all electrical appliances related to electricity and water, because electricity and water can easily lead to leakage, which is a great safety hazard.

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~