How long does it usually take a new car to run in?

The running-in period of a new car generally takes 1 year.

The first two years after the purchase of a new car are the complete period of vehicle functions, which can be said to be the best period of the car, equivalent to people's youth. If the vehicle has any fatal quality problems, it can be found within one year.

If there are no quality problems, then the vehicle is in excellent condition at this stage, as long as there is basically no problem in daily maintenance. At this stage, everyone should pay attention to safe driving.

For new cars within one year, routine inspection is essential. Generally speaking, we should start with the following nine routine inspections.

① Check the condition of drive belt, exhaust system and battery;

② Replace the oil and oil filter;

③ Check and clean the air filter;

④ Check the performance of braking system and the quality and quantity of brake fluid;

⑤ Check the quality and quantity of steering system and booster oil;

⑥ Check the dust cover of each ball pull rod of the chassis;

⑦ Check the condition of front and rear suspension;

⑧ Check the tire condition;

Pet-name ruby check the performance of the air conditioning system.

Doing daily maintenance can make the car run more smoothly, eliminate minor faults in time, and the life of the car will be longer. It is necessary to do some routine examinations every year.

Extended data:

Matters needing attention in running-in period of new car:

New cars should avoid running at full load during the running-in period, because excessive load will increase the load of the engine and transmission, resulting in excessive output power of the engine and excessive wear of parts. Therefore, the car mainly knows the maximum bearing mass of the car, so that the new car can avoid driving with full load during the running-in period, thus prolonging its service life.

The owner can find two data, kerb mass and allowable total mass, in the automobile product manual or configuration sheet. Curb quality, also known as empty car quality, refers to the quality after the car is fully equipped according to the factory technical conditions (such as spare tires and tools). ) and filled with oil and water; The allowable total mass refers to the allowable total mass of a car when it is ready to run under normal circumstances, including manned (including drivers) and loading.

The allowable total mass MINUS the empty mass is the maximum bearing mass of the vehicle, which is the maximum bearing capacity of the vehicle.

People's Network-Five Important Periods of Automobile Maintenance? What stage is your car in?

People's Network-How should a new car spend the running-in period?