How to activate Apple's new mobile phone?

How to activate the newly bought Apple mobile phone?

Tools: Apple 7plus

1. First put the original mobile phone card into the newly bought mobile phone, and then what carrier will be displayed on the mobile phone.

2. Then, when the machine is turned on, a prompt appears, and click the quick start option.

3. Then select the language and click Simplified Chinese.

4. Then, after selecting, click the keyboard and make a selection as needed.

5. After entering, you choose to connect to the network.

6. After connecting to the network, the Apple mobile phone is activated.

7. After entering, it is the operation. Touch the id to enter.

8. Then a prompt will appear and click OK.

9. Then, create and enter the password data of the mobile phone as needed.

10, and then it will come out to select applications and data, and then click Set as New iphone.

1 1, and then after activation, enter the mobile phone desktop.

How to activate Apple's new mobile phone?

First, install the Nano-SIM card of iPhone7. After installation, press the power button to turn on the power. After opening, we will see a welcome interface of the operator network. Click Accept to enter the language selection page. Domestic users prefer simplified Chinese, as shown in the figure.

2. Then start to select a country or region, and confirm to select "China", and then enter the keyboard setting page, where it is suggested that you don't need to select, just click "Next" by default, as shown in the figure. 3. Because the activation needs to connect to the network, you need to connect to the Wifi wireless network next. Just choose a Wi-Fi password that you know, enter it and click "Join" in the upper right corner, as shown in the figure below.

Fourth, after the network connection is successful, the system will prompt that it will take several minutes to activate the iPhone. After that, you can enter the initialization setting page of the new iPhone7, similar to the initialization setting process of Microsoft's Win8/ 10 system, step by step.

The first thing to determine is the location service. There is no need to set it here. Just select "Disable Location Services", as shown in the figure. Fifth, the next step is to set up the iPhone page. Considering that it is still a brand-new iPhone7, I suggest you choose "Set as a new iPhone". As for what backup to restore from, you don't need to set it.

Then enter the Apple ID input login page. If you already have an Apple ID, just click "Log in with your Apple ID". If you don't have an Apple ID, click Create a Free Apple ID. Remember that Apple ID is a very important account and password. Remember, if you forget, you must also remember your email registration. 6. Since I have registered my Apple ID, I can directly enter my account to log in, and then I will see the "Terms and Conditions". Click the "Agree" option below to enter the next operation process, as shown in the figure.

7. Click the Agree button in the prompt of the "Terms and Conditions" dialog box that pops up next. After that, you will be prompted, and it may take several minutes to create an Apple ID. Leave it alone at this time and wait for the next operation, as shown in the figure. 8. After setting the Apple ID, enter the iCloud setting interface.

Click "Don't use iCloud" directly here. Then you need to create a password. Let me remind you that the iOS9 system has become a 6-digit password instead of a 4-digit password.

It is worth noting that the password created at this time is the iPhone7 lock screen unlock password. This password is also needed when setting fingerprints after entering the system, so please be sure to set a password that you remember. 9. After the password is created, start to enter the touch ID fingerprint identification setting interface.

Of course, fingerprint identification can also be set after entering the system. At this time, you can directly click "Set Touch ID later" and click "Continue" in the pop-up confirmation dialog box, as shown in the figure. Ten, the next setting can choose negative or later options. For example, in the next Siri and iCloud keychain settings, you can directly choose not to use Sari and set it later, as shown in the figure.

XI。 Similarly, in the settings of diagnosis and application analysis, we can simply choose not to send or not to share, as shown in the figure. 12. Initialization setting is coming to an end. Next, in the enlarged display settings, select the standard, and then click Next, as shown in the figure.

After the above steps, the whole process of iPhone7 activation is basically completed here. Finally, you will see a prompt to get started. Congratulations and welcome to the iPhone. Click Start to enter the iOS 10 system interface, as shown in the figure. Finally, let's take a look at the iPhone7 lock screen interface and wallpaper, as shown in the figure below.

How to activate a new Apple phone?

Take iphone x as an example, and so do other models. The steps are as follows:

Step 1: Press and hold the power button until the "Hello" interface appears, then slide up and select the desired language.

Step 2: Choose a language before choosing a country. China is usually chosen at this time.

Step 3: Next, select the keyboard you want to use, and then click Next.

Step 4: Choose the wireless LAN you trust, and be careful not to use the public network as much as possible.

Step 5: Jump to the "Data and Privacy" page. After reading the text, click Continue. You can also click to learn more.

Step 6: Set the mobile phone unlock password and enter the face ID, or enter the face ID at the back to temporarily set the mobile phone unlock password.

Step 7: Log in to your Apple ID. If you don't have an Apple ID, you can click "Forgot your password or don't have an Apple ID".

Step 8: Set up SIRI, understand shortcut gestures, or this page appears, and your iphone will be activated successfully.

How to activate a new Apple phone?

Take iphone x as an example, and so do other models. The steps are as follows: Step 1: Press and hold the power button until the "Hello" interface appears, then slide up and select the desired language.

Step 2: Choose a language before choosing a country. China is usually chosen at this time. Step 3: Next, select the keyboard you want to use, and then click Next.

Step 4: Choose the wireless LAN you trust, and be careful not to use the public network as much as possible. Step 5: Jump to the "Data and Privacy" page. After reading the text, click Continue.

You can also click to learn more. Step 6: Set the mobile phone unlock password and enter the face ID, or enter the face ID at the back to temporarily set the mobile phone unlock password.

Step 7: Log in to your Apple ID. If you don't have an Apple ID, you can click "Forgot your password or don't have an Apple ID". Step 8: Set up SIRI, understand shortcut gestures, or this page appears, and your iphone will be activated successfully.

.

How to activate Apple's new mobile phone?

The specific steps to activate the new Apple phone are as follows:

1. First, install the Nano-SIM card of iPhone7. After installation, press the power button to open it. After opening, we will see a welcome interface of the operator network. Click Accept to enter the language selection page. Domestic users prefer "Simplified Chinese", as shown in the figure.

2. Then start to select a country or region, and confirm to select "China", and then enter the keyboard setting page, where it is suggested that you don't need to select, just click "Next" by default, as shown in the figure.

3. Because the activation needs to connect to the network, you need to connect to the Wifi wireless network next. Just choose a Wi-Fi password that you know, enter it and click "Join" in the upper right corner, as shown in the figure below.

4. After the network connection is successful, the system will prompt that it will take several minutes to activate the iPhone. After that, you can enter the initialization setting page of the new iPhone7, similar to the initialization setting process of Microsoft's Win8/ 10 system, step by step. The first thing to determine is the location service. There is no need to set it here. Just select "Disable Location Services", as shown in the figure.

5.5. After the fingerprint identification setting of iPhone, it is the Siri voice assistant setting. Here, you can skip it without setting it first At this point, iPhone activation has been successfully completed. After that, we can see the desktop interface of iPhone, as shown in the figure below.

How to activate Apple 6 after it is restored to factory settings?

Manual operation activation, the specific steps are as follows:

Step 1: iPhone activation needs to install SIM card first, so the first step of activation still needs to install SIM mobile phone card first.

Step 2: After installing the SIM card, you can turn it on. The method is to press and hold the power button on the top of the iPhone for a few seconds to enter the initial boot interface.

Step 3: Set the iPhone language.

Need to use Simplified Chinese, so when choosing the setting language, choose Simplified Chinese.

Step 4: Select a country or region.

You need to choose "China" here

Step 5: iPhone keyboard settings

Click "Next" by default here.

Step 6: iPhone connects to WLAN.

Because the introduction is about the activation of connecting Wifi wireless network, it must be carried out in the environment of wireless network. Just enter the wireless password and connect.

After completion, you can enter the welcome interface of the iOS system network, and you can choose to accept it.

Step 7: Set the iPhone's iOS location service. You can choose to enable or disable location service here, because it can be set in the system later, so users can choose one at will.

Step 8: Set up iPhone

Next, enter the iPhone settings. Because it is a new machine, you need to build a new iPhone, so you need to choose "Set as a new iPhone" here, or you can choose not to build it.

Set to skip the id application for the new iPhone.

Step 9: Set up iCloud

You can choose not to use it here for the time being.

Step 10: iPhone fingerprint identification settings

Use positioning

Do not send report

Don't use Siri

IPhone activation complete: welcome.

After that, you can see the new iOS system interface.

How to activate the new Apple 6 mobile phone

1. After the phone is turned on, the page shown below will appear. In the country area, you only need to choose to set the country in this option, and then the mobile phone interface will automatically jump.

2. Then there is the screen for setting the keyboard input method. There are six options, representing different keyboard setting information. You can set it according to your own input habits. 3. After setting the input method, enter the next page, and the screen shows that you can "select WLAN network" to activate the connection, and click Connect Wireless Network.

Or you can download iTunes software from your computer to activate it. 4. The Location Services Options page will be displayed, which contains options for enabling location services and disabling location services. Selecting Enable Location Services means allowing applications on iPhone to locate your location, while selecting Disable Location Services means prohibiting applications on iPhone from locating your location.

5. Next, continue to follow the prompts on the iPhone. If you have an Apple account, click to log in to the Apple ID account; If not, you can choose to create or skip this step. 6. Then the iPhone terms page will pop up, and the options can be agreed.

.

How to activate the new Apple 6 mobile phone

1. After the phone is turned on, the page shown below will appear. In the country area, you only need to choose to set the country in this option, and then the mobile phone interface will automatically jump.

2. Then there is the screen for setting the keyboard input method. There are six options, representing different keyboard setting information. You can set it according to your own input habits.

3. After setting the input method, enter the next page, and the screen shows that you can "select WLAN network" to activate the connection, and click Connect Wireless Network. Or you can download iTunes software from your computer to activate it.

4. The Location Services Options page will be displayed, which contains options for enabling location services and disabling location services. Selecting Enable Location Services means allowing applications on iPhone to locate your location, while selecting Disable Location Services means prohibiting applications on iPhone from locating your location.

5. Next, continue to follow the prompts on the iPhone. If you have an Apple account, click to log in to the Apple ID account; If not, you can choose to create or skip this step.

6. Then the iPhone terms page will pop up, and the options can be agreed.

How to activate Apple's new mobile phone?

IPhone activation steps:

1. First, please make sure that your computer has installed the official tool iTunes. If not, please install the latest version of iTunes.

2. Open the downloaded iTunes and select the iTunes Store option on the left.

3. After opening the iTunes Store, start selecting the country, pull the page to the bottom, and select the small icon.

4. Then change the icon here and choose to register an App Store account.

5. Unlocking begins. In the last process of registering an iTunes account, iTunes has been downloaded and installed. The first step, of course, is to press and hold the power button on the top of the fuselage, and then turn it on.

6. A "white apple" appears on the interface. Of course, relax, this white apple is not a problem white apple.

7. Wait for about 20 seconds, and the iPhone enters the lock interface. The inactive iPhone is still in English for the time being. The screen will prompt the user that the SIM card is not inserted in the mobile phone, and ask the user to connect the iPhone to the computer and open iTunes to activate it.

8. Without unlocking, iPhone can make emergency calls like all mobile phones. There are five language prompts on the dial, including traditional Chinese. Then insert the cut SIM card into the iPhone card slot. When iTunes software detects an iPhone with a SIM card, it will connect to the Internet for verification (Apple server), and then a dialog box of operator settings will pop up. Here, you must click "Update Settings" and wait until the update is successful.

The whole process takes tens of seconds. After activation, a prompt box will pop up on the screen, "iPhone has been activated".

How to activate Apple's new mobile phone?

Methods/steps

1。 Download itunes to your computer, and you can go to Apple official website to download it. The installation procedure is very simple. Make sure that your computer can access the network at any time.

2. Insert the SIM/USIM card into the iPhone. Only mobile phones with SIM/USIM cards can access the network. First of all, you need to take out the SIM/USIM card holder, insert it into the socket next to the earphone hole with the pop-up tool, and slowly push it inward. Then, pull out the SIM/USIM card tray, insert the SIM/USIM card into the tray, so that the side of the card with the metal contact is up, and then put it into the tray.

3. Connect the mobile phone and the computer, and insert the data cable of the mobile phone into the USB socket of the computer. Under normal circumstances, itunes installed in the computer will automatically recognize the iphone. If it is not recognized, please unplug the data cable and plug it in again.

4. Automatically activate the iphone. When itunes recognizes the iphone, it automatically activates the phone, but make sure you can connect to the network.

Update itunes. If a dialog box prompts "Update Settings" when running itunes, you need to complete the update. You can click.

5. Click Update, or go to Apple official website to download and install the latest version.

* Note: Please make sure that the iphone has enough power before activation. If the battery is low, itunes won't recognize it.