How to disassemble the nine aurora integrated machine?

First, remove all computer peripherals, such as mouse and keyboard, unplug the network cable and cut off the power supply. Put the screen down;

Open Baidu App to see more pictures.

(2) At this time, you can see that there are two cross-shaped screw holes on both sides. This is where we use a Phillips screwdriver. Completely unscrew the screws inside, and make sure that they are completely unscrewed, otherwise the shell may be damaged when unpacking.

(3) There is a snap button in the middle of the base of the all-in-one machine. When the screw is completely unscrewed, press this button hard, and the lower part of the chassis will bounce up a little.

(4) After the lower part of the chassis will bounce slightly, here, use the prepared hard card to reach into the pop-up gap and row upward. I'll open it a little more, and then break my hands so that the back cover can be taken off.

(5) The all-in-one machine with the back cover removed is like this. 1 is the screw of the optical drive, 2 is the screw of the motherboard, and you can see the memory when you remove it, and 3 is the screw of the hard disk.

(6) After handling the problem, install the rear cover. When installing, pay attention to fasten all the movable buckles before tightening, otherwise there may be gaps in the chassis after tightening, which is unsightly.