Urgent for N97 soft and hard instructions! ! ! ! Online, etc

I. The grid machine that must be seen in front-reserved number 2

This method makes use of the automatic recovery function of S60 system files after being destroyed, and is suitable for all Nokia S60 systems. The timing of the lattice machine is nothing more than the following two:

1. The system crashed and could not enter the standby screen.

2. The software installed in the system is too messy. When it is deleted, it will leave junk files on the C drive.

Grid machine adopts the following two methods:

1. standby input *#7370#

2. Press and hold the dial key, the "*" key and the "3" key at the same time, and turn on the power until the words "NOKIA" appear and the words "Formatting …/Formatting …" appear.

Both methods will cause the "number 2" to disappear. Although "Digital 2" is not supported by two mobile phone operators in China, some people are still uneasy about its disappearance. The alternative method, because it is to be carried out in standby state, is not suitable for the situation that the system crashes and cannot enter the standby screen.

The specific method is as follows:

1. Turn on Bluetooth. Don't open any programs in your phone.

2. Use "File Manager" to enter the C drive. Delete all files and folders except System. Then enter the system directory and delete all directories except Data and Shareddata. Change Data and Shareddata to other names, such as Data 1 and Shareddata 1. Then delete it. At this point, there are no files on the C: disk, only a system directory.

3. Turn it off and then turn it on again. At this time, your mobile phone prompts you to reset the time. Look at your c drive. Is it the same as the new mobile phone? Look again, number 2 is still there.

Second, the grid machine must see-the basic content of formatting:

First of all, no matter what method you use, after formatting, all mobile phone C drives are restored to the factory state, including your SMS and phone book, which can be backed up before formatting.

Phone book, although some formatting methods can save user settings, it is better to back it up.

Soft mesh machine:

1. The simplest thing is to use the "Restore Factory Settings" function in the phone settings and follow the prompts.

2. Enter * # 7780 #- Mobile phone soft reset (save phone number, information, incoming and outgoing numbers, etc. ).

3. Enter *#7370#, and the original password is 12345. The phone will prompt to restore all factory settings? The phone will restart. Select Yes, and then enter the lock code. The default is 12345. After entering, select OK.

It should be noted that if some e-disk software (such as call enhancement, screen saver, etc.) with resident memory. ) and Q9. T9 font runs, so formatting is invalid. Therefore, before soft grid, all these softwares should be closed and Chinese font files should be deleted before formatting can be successful. Font files are generally under system/font. To delete the font file, please rename the font directory with HANDYFILE and delete it!

Hard mesh machine:

This method is usually used when the system is too messy to start, or soft formatting has no effect. This format is more thorough ~ ~ ~ Turn off the phone, press the call key \ No.3 key \ * key when turning on the phone, and then

Press the power button and don't let go until "Format ..." appears on the screen. This formatting is thorough, and there will be no problem of invalid formatting.

Others: Press the * #+power button to start the power grid without any prompt.

Precautions:

When formatting, it needs enough power to ensure that it should generally run at full power.

It is best to uninstall all the software first, and then see if there is a similar "system error"! If there is no similar "system error", then proceed to the grid machine! Don't try to turn off the phone or plug in the charger on the way to the lattice machine. Try to put the soft shell first.

The software originally installed on the MMC card will be affected after the grid machine, so under normal circumstances, the important data of the MMC card will be backed up and then formatted, and the programs saved on the E disk will be reinstalled after the phone format is completed.

In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in program management-take out the MMC card-check whether there are system errors-format the mobile phone-install the MMC card-format the MMC card-(at this time, the mobile phone is the purest basic system)-install the programs that need to be installed-restore the address book.

Three. Grid machine must see-the purpose of each folder in the system:

For smartphones with Series60 interface, after MMC is inserted, there are generally four logical storage drives in the system:

The user storage area 668 1 in C mobile phone is 8M.

Virtual disk, a virtual buffer disk that uses idle running memory.

E MMC card

Z mobile phone system ROM is read-only.

Among the four disks, the file structure of C E Z disk is similar.

Before formatting the system, you can back up related files for recovery.

Address book c: \ system c: \ system \ data \ contacts.cdb.

C:\System\Data\CntModel.ini

Menu c: \ system \ data \ applications.dat.

Standby mode c: \ system \ data \ scshortcure.ini.

MMS setting c: \ system \ data \ MMS _ settings.dat.

Sms settings c:\ system \ data \ SMS rest. dat, SMS settings. dat, SMS _ settings.dat

Alarm clock setting c: \ system c: \ system \ data \ alarmserver.ini.

Connection setting c: \ system \ data \ cdbv3.dat.

Notepad C:\ System \ Data \ Notepad.dat.

WAP bookmark c: \ system \ data \ bookmarks1.db.

Scenario Mode C:\ System \ Data \ Profile \

Plan C:\ System \ Data \ Calendar

Wap-related C:\System\Data\wapstore\

Favorites c: \ system \ favorites (you can move these files to e: \ system \ favorites).

C:\System\Apps\Phone deleting the bmp file inside can restore the words "China Mobile".

After the above files are backed up and formatted, take them back to the exam and restart your mobile phone. . . . Personalization will make a comeback. .

Let's analyze the most complicated system folder:

The file system.ini is very important, and the connect.ini file will be generated after setting the properties of the connected mobile phone.

When your MMC is set with a password, the MMCSTORE file will be automatically generated. Open to see the password set by MMC.

Appsis format software

(User interaction executable file. app; application

Resource file. royal society of chemistry

Icon file. aif

No interface executable program. Extensions of executable programs

And other documents required for operation)

Apps\appinst is used to record information about installing software.

Applications \ Cameras store configuration information related to camera shooting.

Apps\profileapp information about all current situational patterns.

Bootdata system startup parameters and logs

The unknown ability has always been blank (English meaning: ability, performance, capacity, acceptance)

The codec is installing some player's decoded files.

The setting data file saved by the data program.

(backgroundimage.mbm wallpaper

Bluetooth pairing information of btstate.dat

calendar

Clockapp.dat time parameter

Contacts.cdb contact

As well as configuration files and wap information of many softwares)

Shortcut files of Favorites *. lnk

"Chinese Star" and "Tomken" input methods have been installed in the Fep file for storing input methods.

Help software and help files attached to the game.

Font Add a new system font.

Installation reverse installation record.

Link library files needed to run Libs software.

Localized Urban Data World Clock Professional Edition

Localized ZipMan data

Programs saves auxiliary running files, as well as some UI-free programs exe and dll, which are similar to Libs directories and usually load automatically.

Magic 10 1 appears after installing the MGS platform game.

Mail stores short messages, multimedia messages, emails and their settings.

Media will only appear after installing some software.

MIDIets java configuration file

Midp java program body

Directory about information settings.

Recogs stores association mode files.

The plan saved the plan.

Shareddata is the configuration file of all software. Ini (automatically loaded after startup, unable to open. )

Skin theme mode file after installation

Temp temporary directory

YReg temporary directory

Four. Grille machine must see the precautions in front of N70 grille machine:

1. First, back up business cards and short messages;

2. Back up the menu, folder and software icon arrangement order, and then back it up to the memory card. (c:/system/data/applications.dat), copy it back with FileMan after the grid is completed, and restart the phone, so that the icons will not be confused;

3. Back up the alarm clock file (c:/system/data/alarmserver.ini) in the same way as in 2;

3. Back up the four files in the C drive /system/datd directory of SmartMoviev2.76, otherwise the smart cinema cannot be opened after the grid machine and needs to be reinstalled.

c:/system/data/GSM _ identity . qxc

c:/system/data/IP _ config _ x2 . sys

c:/system/data/StackSrv05.db

c:/system/data/utility _ dump . dat

4. Do a good job of backing up the radio files (two files in c:/system/apps/VisualRadio), otherwise it will be troublesome to search the radio station after stopping.

These are the main preparations to be made before the lattice machine, and nothing else matters.

Five. Grid machine must see -N70 grid machine:

Unplug the memory card first, then press *#7370# in the standby screen, and the soft box will do, and then enter the security code 12345. After crossing the grid, Line 2 is still there. Even the hard grid line 2 is not lost (open or not).

When the machine is shut down, it is recommended to use a hard grille.

Six. Lattice machine must see N70 Lattice machine:

1. Plug in the memory card, copy the backup files of icons, alarm clocks, smart cinemas, radio stations, etc. first, and then restart the phone.

2. Then restore business cards, text messages and other backups, and restore some settings such as mobile phones, ringtones and shortcuts.

3. Re-register three office documents of QuickOffice2. 1.3. After opening word, you will be prompted that the use has expired. You can re-enter 12345.

4. java software cannot be used after the grid machine. If you want to reinstall, be prepared.

5. In addition, some software needs to be reset and can be used normally without reinstallation, such as area code display (or backup in advance), screenshot software, recording software, automatic answering machine and so on.

put on file

Let the computer recognize Nokia Gage's MMC card!

Nokia gage can recognize the 256MMC card, but the computer connected by USB card reader can't recognize the MMC card, so:

1. After formatting MMC with Nokia gage mobile phone, the problem still exists.

2. Format MMC with a card reader, the computer operating system is windows XP, and the FAT file system format is selected; After formatting, the problem remains the same.

After these two methods fail, the final solution is as follows:

Instead of using USB boot (a kind of software for making boot USB flash drive), use USB card reader to format MMC card and select HDD startup mode. After successful formatting, unplug the card reader. At this time, you should pay attention to:

1. The computer prompts you to insert the USB flash drive again, but please do not insert it;

2. Put MMC into Nokia measuring tool and format MMC with Nokia measuring tool.

Finally, PC and Nokia Gage can recognize MMC cards at the same time. To sum up:

Although both Nokia gage and windows can recognize the format of MMC card, the header file of file system may be different. Using the software to make the boot USB flash drive, write the boot area of the ordinary hard disk into the card file system of MMC, so that windows can recognize it. Why do you finally need to reformat with Nokia Gage? The main reason is that Nokia Gage also wrote Nokia's unique file system logo in the boot area, but the two file system logos are stored in different locations in the boot area, so they can be saved in the end.