What's wrong with Apple VI's mobile phone without any sound?

The iphone 6s plus phone has no sound, which is caused by the wrong sound setting. Tools you need: iphone 6s plus phone.

Specific operation steps:

1.iphone 6s plus phone unlocks to the home screen page, and then opens the settings. After entering the setting center, find and open the general function. After entering the general management settings page, find and open the auxiliary functions. Under the details page of the auxiliary function, find and open the phone mute function button to open it.

2. After the noise reduction function of the mobile phone is turned on successfully, find the channel balance setting, and drag the button of the channel balance function to the middle to keep the left and right channels balanced. After successfully setting the channel balance, touch the HOME button of iphone6s plus to return to the home page.

3. Press and hold the volume button on the side of iphone 6s plus to adjust the volume. After the volume is adjusted to the maximum, it can solve the problem that the iphone 6s plus phone plays music and the video has no sound.

Check the phone settings.

Check whether the phone is set to mute. The mute button of Apple's mobile phone is on the left side of the phone. Check it carefully.

Maybe the phone's on, do not disturb mode.

1. Look at your missed calls first. After entering the mobile phone, you can see your missed calls in the call record and see which important calls you missed. Call back first and enter the phone settings here. To cancel this mode, you need to cancel it in the phone settings or control center. After entering the phone settings, continue to click Do Not Disturb mode.

2. Cancel and close the Do Not Disturb mode time here, and turn on the following repeat call switch. When the repeat call switch is turned on, the last call will not be noticed or received. Then turn on this switch within three minutes of repeating the second time, and call the mobile phone again within three minutes, and the ringtone will come to mind. Complete the setup.

3. In addition, we can turn the Do Not Disturb mode on or off directly from the control center. Slide your finger up the screen and the control center will appear.

Check whether the speaker is muted.

1, make a phone call to test whether the receiver and message are normal. If the mobile phone is tested normally, it is more likely that the speaker will fail, so it is recommended to send it for repair.

2. Test whether playing music is normal with original headphones. If the earphone works normally, the speaker is likely to fail, and it is recommended to send it for repair.

Eliminate software conflicts

Back up mobile phone data (phone book, SMS, multimedia files, etc.). ) and restore factory settings (menu-Settings-Reset-Restore factory settings).

Check headset mode

Sometimes it may be because the headset mode of the mobile phone does not switch automatically. You can try to plug the earphone into the ear hole again, and it will usually recover. If it really doesn't work, clean the earphone hole with a cotton swab stick and it will return to normal in a short time.