Problems with Nokia 5300

■ Install SIM card and battery.

Be sure to turn off the phone and disconnect it from the charger before taking out the battery.

Please keep all SIM cards out of the reach of children.

Please ask your SIM card dealer whether to provide SIM card service and how to use it. SIM card dealers can be service providers, network operators or other distributors.

This mobile phone can only be used if it is powered by BL-5B battery. Always use Nokia original batteries.

To remove the back cover of the phone, press the back cover release button (1), and then remove the back cover from the phone body (2). Take out the electricity as shown.

Swimming pool (3).

Take the door

Open the SIM card holder (4) and insert the SIM card into the card holder (5) correctly. Close the SIM card holder (6).

Reinstall the battery (7). Slide the back cover to lock it in place (8, 9).

■ insert microSD.

storage card

Keep all microSD memory cards out of the reach of children.

1

9252493_5300_zh_cn.fm Page 2 Friday, September 25th, 2006 1 4:49 p.m.

Take the door

1. Remove the back cover of the mobile phone.

2. Insert the microSD memory card into the memory card slot, with the gold contact facing up, and then gently press the memory card to lock it in place.

3. Install the back cover of the mobile phone. Only compatibility can be used in the device.

MicroSD memory card, other memory cards,

If the micro multimedia card is used, it cannot be loaded into the microSD memory card slot, which is not compatible with this mobile phone. Using incompatible memory cards may not only destroy the memory cards and mobile phones, but also destroy the data stored in the cards.

Only microSD memory cards approved by Nokia and suitable for this mobile phone can be used. Nokia adopts recognized memory card industry standards, but not all other brands of memory cards can work normally or are fully compatible with this mobile phone.

■ take out the microSD card.

Important: Do not take out the memory card when reading or writing the microSD memory card. Taking out the memory card during operation may not only destroy the memory card and the mobile phone, but also destroy the data stored in the card.

1. Make sure that no application software is currently reading or writing to the microSD memory card.

2. Remove the back cover of the mobile phone.

3. Press the microSD memory card inward to unlock it, and then remove the microSD memory card from the slot.

■ Charge the battery.

Please check the charger model 1 before using any charger to charge this phone. This mobile phone needs to be charged with AC-3 or AC-4 charger before use.

Warning: Only batteries, chargers and accessories approved by Nokia and suitable for this specific model of mobile phone can be used. Using other types of batteries, chargers and accessories may violate the approval or warranty terms of mobile phones and may lead to danger.

1. The specific model of the charger varies with the plug type. For example, for AC-3, the model of the charger can be AC-3C, AC-3U or AC-3X, while the charger sold in Chinese mainland is AC-3C.

2

9252493_5300_zh_cn.fm Page 3 Friday, September 2006 1 4:49 pm

Take the door

For the availability of approved attachments, please contact.

Please consult your dealer. When cutting off the power of any accessory, you should hold and pull out the plug, not pull the power cord.

Plug the charger into the AC power socket, and plug the connecting cable of the charger into the jack at the bottom of the mobile phone.

If the battery is completely exhausted, you may have to wait a few minutes before the charging indicator light appears on the screen, and then you can make and receive calls.

The charging time depends on the charger used. When the mobile phone is in standby state, it takes about 3 hours to charge BL-5B battery with AC-3 charger.

■ Open the phone slider.

To open the phone's slider, please push up the top half of the phone.

■ Power on and off.

Warning: Please don't turn on the mobile phone when it is forbidden to use it, otherwise it will cause interference or danger.

Press and hold the power button. See on page 5.

Keys and parts. If the phone needs a PIN code or UPIN code, please enter the required password (it will be displayed on the screen as

* * * *), and then select OK.

Set the time and date

Enter the local time, select the time zone of the current location according to the time difference from Greenwich Mean Time (GMT), and then enter the date. See "Time and Date Settings" on page 35.

Set ".

Purchase and use of services

When you turn on the phone for the first time and the phone is in standby state, the phone will ask you whether you have obtained the configuration settings (network service) provided by the service provider. Please confirm or reject the prompt. Please refer to "Connecting Service Provider Support" on page 4 1 and "Configuring Setup Service" on page ix.

■ antenna

Your phone has a built-in antenna.

three

9252493_5300_zh_cn.fm Page 4 Friday, September 6, 2006 1 4:49 pm

Take the door

Note: and use any other

Like a radio transmitter, when the phone is turned on, please don't touch the antenna area unless necessary. Otherwise, the call effect will be affected, and the mobile phone will work at a state higher than the required energy level. Please don't touch the antenna area when using the mobile phone to give full play to the antenna performance and prolong the battery life.

■ Headphones

The headphones in the sales package are approved by Nokia and are suitable for this mobile phone. Always choose a moderate volume when listening to music. It is recommended to pay special attention to the volume to avoid connecting any other headphones to the device.

Do not connect products that generate output signals, as this may damage your equipment. Do not connect any voltage source to this jack.

Audio adapter (optional accessory)

Use the AD-50 audio adapter to connect the

Headphones with 3.5 mm plugs are connected to the mobile phone. If the adapter is connected to the mobile phone, the handset of the mobile phone will be disconnected.

Please note that this adapter does not support microphone cables.

■ Mobile phone wristband

As shown in the figure, put the wristband into the wristband hole of the mobile phone and tighten it.

four

9252493_5300_zh_cn.fm Page 5 Friday, September 5, 2006 1 4:49 pm

2. Your mobile phone

Your cell phone

■ Keys and Component Headphones (1)

Music player, skipping and rewinding (2)

Music player, start and pause (3) accessory jack (4) music player, skip and fast forward (5) call key (6) left selection key, middle selection key and right selection key.

Key (7)

End key (8) Navigation key (9) Keyboard (10)

Charger jack (1 1) USB jack (12) power key (13) cell phone wristband hole (14) camera lens (15)

Turn up the volume/push to talk (16)

Volume down key (17) camera key (18) infrared data association (19) selfie window (20) speaker (2 1)

five

9252493_5300_zh_cn.fm Page 6 Friday, September 6, 2006 1 4:49 pm

Your cell phone

■ Standby state

When the phone can be used and you haven't entered any characters, the phone is in standby state.

screen

Signal strength of cellular network (1) battery status (2) indicator (3)

Network name or operator logo (4)

Clock (5)

The main display area (6)

The function of the left selection key (7) is a shortcut or a shortcut of other functions. See "Left Select Key" on page 35.

The function of the selection key (8) is a menu. The function of the right selection key (9) is the address book or

Shortcuts to other functions. See "Right Select Key" on page 35. net

The network operator may have customized the mobile phone menu.

Current standby mode

In the current standby mode, the function and information list of the selected mobile phone will be displayed on the screen, and you can directly enter the displayed content. To turn on or off the current standby mode, select menu >；; Settings > display settings > standby mode > standby mode > on or off.

In standby mode, press the up navigation key or down navigation key to browse the list, and then select Select or View. If the left and right arrows appear at the beginning and end of a line, it means that you can see more information by pressing the left navigation key or the right navigation key. To exit the current standby mode, select Exit.

To organize and change the current standby mode, start the navigation mode, select an operation, and then select from the available options.

Designated symbol

Unread information. Not sent, cancel sending.

Or send a failed message.

Missed call.

, and your connection status is online or offline, respectively.

One or more instant messages were received.

The keyboard is locked.

six

9252493_5300_zh_cn.fm Page 7 Friday, September 2006 1 4:49 pm

Your cell phone

When receiving an incoming call or a text message, the mobile phone will not ring.

The alarm clock has started.

The timer is running.

Stopwatch timing is running.

, the phone is already in GPRS or

Register in EGPRS network.

, GPRS or EGPRS connection has been established.

, GPRS or EGPRS connection has been suspended (reserved).

Bluetooth wireless connection has been established.

, that is, press to say that the connection has started or paused.

If you have two phone numbers, it means that the second number is currently selected.

All calls will be transferred to another number.

The speaker is turned on, or the phone audio cradle is connected to the phone.

Calls are limited to closed user groups.

Timing scheme mode has been selected.

Or an earphone, a hands-free unit, a motion sensor or an audio cradle of that mobile phone has been connecte to the mobile phone.

■ Flight mode

You can turn off all RF functions, but you can still access offline games, calendars and phone numbers. Please use flight mode in a radio-sensitive environment, such as on an airplane or in a hospital. When the flight mode is activated, it will be displayed.

Select menu > settings > profile >

Flight mode > start or personalized selection.

To turn off airplane mode, please select any other profile.

In airplane mode, you can make an emergency call. Enter the emergency phone number, press the call button, and then ask on the mobile phone to exit the flight scene mode? Select the confirmation time. The phone will try to make an emergency call.

■ Keyboard lock (keyboard protection)

To prevent touching the keys by mistake, please close the slider of the mobile phone, and then select lock within 3.5 seconds.

To unlock the keyboard, select unlock > confirm, or open the phone slider. If the security keyboard lock is activated, enter the security password as required.

seven

9252493_5300_zh_cn.fm Page 8 Friday, September 2006 1 4:49 pm

Your cell phone

To answer an incoming call when the keypad is locked, press.

Call key or open the phone slider. When you bundle an incoming call or refuse to answer it, the keyboard will automatically re-lock.

For information about the password keypad lock, see "Phone Settings" on page 40.

When the keyboard is locked, it may be possible to dial the official emergency phone number code inherent in the mobile phone.

■ Functions that can be used when the SIM card is not inserted.

Even if the SIM card is not inserted, you can use some functions of the mobile phone (such as using a compatible PC or other compatible devices to transmit data). Some functions in the menu are grayed out and cannot be used.

To make an emergency call, some networks may require that a valid SIM card be correctly inserted into the mobile phone.

eight

9252493_5300_zh_cn.fm Page 9 Friday, September 2006 1 4:49 pm

3. Call function

Communication ability

■ Make a phone call

1. Enter the phone number, and the area code can be added before the fixed phone number code.

To make an international call to 1, press * twice to enter the international phone code.

(the "+"character stands for international dialing code), and then enter the country or region code, area code (if necessary, you don't need to add "0" before the area code) and telephone number.

2. Press the call key to dial. To increase the volume during a call, press.

+,to lower the volume, press-.

3. To end the call or cancel dialing, press the end key or close the mobile phone slider.

To find the names or phone numbers stored in the address book, see on page 29.

"Look up names in the address book". Press the call key to dial the selected number.

To enter a list of dialed phones, press the call key once in standby mode. To dial a phone number, select the desired number or last name, and then press the call key.

One-button dialing

Assign the phone number to a speed dial key from 2 to 9. See "Speed Dialing" on page 3 1. Then, you can dial the push-to-dial number in any of the following ways:

Press the desired speed dial key, and then press the call key.

If speed dial is set to ON, you can also press and hold the required speed dial key until the phone starts dialing. For speed dialing, see "Call Settings" on page 39.

Enhanced voice-activated dialing

You can make a call by saying the name stored in the phone address book. Voice commands depend on the language. To set the language, see Speech Recognition Language in "Phone Settings" on page 40.

Note: It may be difficult to use voice-activated tags in noisy environment or emergency. Therefore, under no circumstances should you rely entirely on the voice-activated dialing function.

1. Please note that the method of making calls between different regions in some countries or regions (for example, between Chinese mainland Province and Hong Kong Special Administrative Region) is the same as making international long-distance calls.

nine

9252493_5300_zh_cn.fm Page 10 September 2006 1 Sunday at 4:49 p.m.

Communication ability

1. In standby mode, press and hold the right selection key or volume reduction key. The mobile phone will give a short prompt tone and display please speak.

2. Speak voice commands clearly. If the speech recognition is successful, the matching list will be displayed on the screen. The phone will play the voice command matching the item at the top of the list. If the result is not what you want, please scroll to another match.

Using voice commands to perform the selected mobile phone functions is similar to voice dialing. Please refer to the voice commands in "Personal Shortcuts" on page 35.

■ Answer or refuse to answer incoming calls.

To answer an incoming call, press the call key or open the slider. To end the call, press the end key or close the slider.

To refuse to answer the phone, press the end key. To mute the ringing tone, select Silent.

call waiting

To answer a waiting call in an ongoing call

(network service), please press the call button. The first call will be held. To end the current call, press the end key.

To start call waiting, see section.

"Call Settings" on page 39.

■ Standby option

Many of the options you can use in a call are network services. Please check with your service provider to see if you have provided the required service.

When making a call, select Actions to use the following options:

Call options include mute or unmute, total recall, menu, keyboard lock, recording, voiceless, speaker or mobile phone.

Network service options include answering or rejecting, holding or continuing the call, calling the other party, joining the conference call, hanging up, hanging up all, and the following options:

Send Multi-Tone—Send Dual Tone Multi-Tone.

Switch Call—Switches between the current call and the call on hold.

Transfer Call—Connect the held call to the current call and disconnect yourself from both calls.

Conference call—Conduct a conference call. Talk alone-in a conference call.

Discuss separately.

Warning: As the volume of the speaker may be very loud, please don't put the phone to your ear when using the speaker.

10

9252493_5300_zh_cn.fm Page 1 1 Friday, September, 2006, 4:49 p.m.

Step 4 Enter the text

Input character

According to the different mobile phone sales market, the available input methods preset in mobile phones are also different.

This phone supports simplified Chinese input method.

■ Choose a writing language

If the phone supports the required writing language, you can change the writing language. Select the operation, or press and hold #, and then select the writing language and the desired language.

■ Input method indicator

The indicator of the currently selected input method will be displayed in the upper left corner of the screen:

Pinyin strokes

English uppercase letters English lowercase letters

figure

Not all the above input methods can be used under any circumstances. Please check the indicator on the screen to see the input method currently used.

■ Switch input method

To switch between available input methods, do one of the following:

Press # repeatedly until the indicator of the required input method appears in the upper left corner of the screen.

Select an operation (for example, when writing information), and then select the desired input method.

■ Pinyin input method

Pinyin letters are marked on the number keys. You don't need to consider the position of the pinyin letters on the number keys, just press the number keys where the pinyin letters are located. The phone will provide a reasonable combination of spelling letters.

Use pinyin input method to input Chinese characters:

1. Just press the numeric keys with the required pinyin letters, and you can enter the spelling letters ("ü" corresponds to "V" on the keyboard and screen).

2. Press 1 repeatedly until the desired tone is displayed on the screen.

3. Press * to display the next possible pinyin combination. Scroll to the desired Chinese character, and then select OK.

1 1

9252493_5300_zh_cn.fm Page 12 Friday, September 2006 1 4:49 p.m.

Input character

■ Stroke input method

The stroke input method divides the strokes that make up Chinese characters into five categories: horizontal, vertical, left, dot and folding.

The strokes are divided into five categories, as shown in the following table:

These five strokes correspond to five numeric keys 1 to 5 respectively.

12

9252493_5300_zh_cn.fm Page 13 Friday, September 2006 1 4:49 p.m.

Input character

Use stroke input method:

1. Please input strokes according to the standard stroke order of Chinese characters and the corresponding number keys.

Tip: If you are not sure about the stroke to be entered or the class to which the stroke belongs.

Otherwise, you can press 6 instead of this stroke, and then continue to enter other strokes. A question mark ("?" ) will be used in the input area. ) means painting.

2. Scroll to the desired Chinese character, and then select.

Confirm.

■ Enter a phrase

You can enter up to seven common phrases of Chinese characters at a time.

1. Press the corresponding number keys to enter the first pinyin letter of the first Chinese character in a pinyin syllable or phrase, or enter its first stroke.

2. Press 0 to enter the separator; Alternatively, when selecting the pinyin input method, press 1 repeatedly to input the tone of the required Chinese characters.

For more details about using delimiters, see Delimiters.

3. Enter the pinyin syllable or the first pinyin letter of the second Chinese character, or enter its first stroke.

4. Repeat steps 2 and 3 as needed, and input the pinyin syllables or the first pinyin of all Chinese characters in the phrase.

Letter, or enter its first pen.

Painting.

5. When selecting the pinyin input method, press * repeatedly as needed to highlight the required pinyin combination.

6. Scroll to the desired phrase in the candidate phrase list, and then select OK.

Not all Chinese phrases are stored in mobile phones. You can create phrases and store them in your phone. See "Creating Phrases" on page 14.

segregator

Use separators to separate phonetic alphabet strings or strokes of different Chinese characters.

Sometimes it is not necessary to use a separator when using pinyin input method, because the mobile phone can recognize two pinyin syllables and automatically insert a separator in the middle. For example, to enter the phrase "color", press 2,

Two four seven three. According to this key combination, the mobile phone will automatically insert a separator between the two syllables "Cai" and "Color" and display it in the list of pinyin combinations to be selected.

Cai.se' as an option.

In other cases, you need to manually enter a separator to indicate the beginning of entering the next pinyin syllable. For example, to enter the word group xi 'an, you need to enter the words Xi and Xi.

Manually insert a separator between two pinyin syllables "an". Otherwise, the phone will display.

"Xian" is used as a candidate pinyin combination.

13

9252493_5300_zh_cn.fm Page 14 September 2006 1 Sunday at 4:49 p.m.

Input character

When you enter a separator, the phone will be based on.

The possible combinations of pinyin letters and separators (if any) that you enter are associated with Chinese characters or Chinese character strings that can form common phrases. You can continue to enter delimiters, and the list of related phrases will change accordingly. For example, to enter "Happy Birthday to you", press.

9, and then press 0 five times, the phone will display.

"Happy birthday to you" as a candidate phrase.

Create a phrase

You can create your own phrases, up to seven Chinese characters, and store them in the database of your mobile phone. In the list of Chinese candidate words, the phrase you defined has higher priority. When the database is full, newly created phrases will automatically replace long-term unused phrases.

1. When the list of input symbols or associated words is not displayed on the screen, select Operation >; User phrase > add.

2. Enter the required phrase, and then select OK.

■ China Chinese Characters Association

The mobile phone can associate a Chinese character string or Chinese character that can form a common word with the last Chinese phrase or Chinese character you input. Select the desired Chinese character or phrase from the list of related words or phrases. The mobile phone will continue to associate the next Chinese character string or Chinese character according to the Chinese character or phrase you choose. If you don't need associated Chinese characters or phrases, you can choose to return to end the association.

Then immediately start to input the next Chinese character,

Or press * to enter symbols or punctuation marks.

■ Repeated input

To repeatedly enter the characters to the left of the cursor in the editing window, press and hold *.

■ Traditional English input method

Press the number keys 1 to 9 repeatedly until the desired character appears on the screen.

Not all the characters that can be entered by pressing this key are marked on the number keys. The characters that can be entered depend on the selected writing language. See section.

"Choosing a Writing Language" on page 1 1.

If the next letter you want to enter happens to be on the same key as the current letter, please wait for the cursor to appear again, or you can quickly press any navigation key to confirm the current letter and then continue to enter the next letter.

Press the number keys 1 to enter some of the most commonly used punctuation marks and special characters.

For more information about entering text, please refer to "Introduction to Entering Text" on page 15.

■ Turn predictive English input method on and off.

When the writing language is English, select Operation >; Open the predictive input method and start the predictive English input method. To turn off the predictive English input method, select Actions >; Close the predictive input method.

14

9252493_5300_zh_cn.fm Page 15 September 2006 1 Sunday at 4:49 p.m.

■ Expected English input method

With predictive English input method, you can input all the letters in the required English words by pressing the corresponding number keys. Imagine that the English input method is based on the built-in thesaurus, and you can also add new words to the thesaurus.

1. Press the number keys 2 to 9 to start typing words. You only need to press the key once to enter each letter.

2. After typing a word and confirming its correctness, you can press 0 to insert a space for confirmation.

If the word is not what you want, press * repeatedly until the desired word appears and confirm; Or optional operation >; Other corresponding projects and if necessary.

If "?" Appears after the word. There is no word you want to enter in the dictionary. To add a word to the dictionary, select spelling. The phone will display the entered letters. Enter the whole word using the traditional English input method, and then select Save.

■ Tips for entering text

When entering text, you can also use the following functions:

When the input characters or symbols are not displayed on the screen, press and hold the required number keys to input numbers.

Input character

Press 0 to insert an empty cell when the list of candidate words or associated words is not displayed on the screen.

To delete the last entered symbol, select Clear. To delete all the entered symbols, select and press Clear.

To delete the characters to the left of the cursor when the input symbols are not displayed on the screen, select Clear. Select and press Clear to quickly delete characters.

If you are using predictive English input method, please select Operation >; Insert a word to insert a word. At this point, use the traditional English input method to input the required words, and then select Save. The word will also be added to the thesaurus.

If you are using traditional English input method or Chinese input method, press * to display the list of special characters. If you are using predictive English input method, please press.

Live * displays a list of special characters.

When the list of special characters is displayed on the phone screen, press * to display the list of characters. Alternatively, you can choose the action when entering text >; Insert face text.

Scroll to the desired character or emoji number, and then select OK to select the desired character or emoji.

15

9252493_5300_zh_cn.fm Page 16 September 2006 1 Sunday, 4:49 p.m.

Browse the list of benefits

Browse menu

This mobile phone provides you with a series of functions and functions, which are distributed in various menus.

1. To enter the menu, select Menu.

To change the main menu view, select actions >; Main menu view >; List, icon, label icon or multi-level display.

To rearrange menus, scroll to the menu you want to move, and then select Actions >; Organization > move. Scroll to the new location where the selected menu is placed, and then select OK. To save your changes, select finish > confirm.

2. Scroll through the menu and select the required options (such as settings).

3. If the selected menu has a submenu at the next level, you can select the required submenu (such as call settings).

4. If the selected menu has submenus at the next level, please repeat step 3.

5. Select the desired settings.

6. To return to the previous menu, select Return. To exit the menu, select Exit.

16

9252493_5300_zh_cn.fm Page 17 Friday, September 2006 1 4:49 p.m.

information

6. Information

You can read, write, send and save.

Text messages, multimedia messages, e-mail, voice messages and instant messages. All information is stored in folders.

■ Text information

Through short message service (SMS), you can send and receive text messages.

You must store the information center number in your mobile phone before sending any SMS or SMS e-mail. See section.

"Information Settings" on page 26.

Please ask your service provider whether you provide SMS e-mail service and how to apply. To store e-mail addresses in the address book, see "Store Details" on page 29.

Your mobile phone supports sending short messages with characters exceeding the limit of a single short message. Messages with more characters than the limit will be sent as two or more interlocking messages. Your service provider may charge accordingly. Characters with accents or other symbols, as well as characters entered with some language options (such as Chinese), will take up more space, thus limiting the number of characters that can be sent in a single message.

The indicator at the top of the screen will show the total number of characters that can still be entered and what is needed when sending.

The number of messages. For example, 673/2 means that it also

You can enter 673 characters, and the message will be sent as two chained messages.

Write and send short messages

1. Select menu >; Messages > new messages > SMS.

2. Enter one or more phone numbers or email addresses in the To: column. To retrieve a phone number or email address from memory, select Add.

3. For SMS email, please enter a title in the title: column.

4. Enter your information in the Information: column.

5. To send a message, select Send. Please refer to "Sending Information" on page 19.

Reading and replying to short messages

1. To view the received information, select Show. To view the information later, select Exit.

When reading information in the future, select energy meter >; Messages > inbox.

2. To reply to the message, please select the reply and message type.

3. Write a reply email.

17

9252493_5300_zh_cn.fm Page 18 September 2006 1 Sunday at 4:49 p.m.

information

4. To send information, please select Send. Please participate.

See "Sending information" on page 19.

■ MMS

Note: Only compatible devices can receive and display MMS. The display effect of information may be different for different receiving devices.

MMS can contain some attachments. Please ask your service provider if it is mentioned.

Provide MMS service (network service) and how to apply for opening the service. See section.

"Information Settings" on page 26.

Write and send MMS

Wireless network may limit the size of MMS. If the size of the inserted image exceeds this limit, the mobile phone may reduce the image to send by MMS.

1. Select menu >; Messages > new messages > MMS.

2. Enter the information content. To add a document, select Insert, and then select from the available options.

3. to preview the multimedia message before sending it, select actions > preview.

4. To send MMS, please select Send. please

See "Sending information" on page 19.