Solution of MMS receiving problem

Have you checked these settings in order to receive MMS smoothly? This article will provide you with a solution to the problem of receiving MMS and help you use your mobile phone better.

1 Check access point settings

Enter the wireless and network settings of the mobile phone and check whether the access point settings in the mobile network are normal. If there is no access point information, remember to add APN manually! Specific information can be obtained by contacting your operator.

2 Confirm signal strength

The signal problem can't be ignored, so please make sure the signal strength of the mobile phone is in the green area. If the signal is not good, try to walk to a place with strong signal before the test.

3 Check the memory space

Remember to check the storage space of the mobile phone to ensure that there is enough space to receive information. If the space is insufficient, remember to clean up the space of the mobile phone and go to the storage options in the settings to check.

4 check the SMS center number

Is it normal to send and receive text messages? Check whether the SMS center number is correct. Telecom version of the small partner does not need to set the SMS center number)

5 Turn on the option of always receiving MMS.

Don't forget to turn on the option of always receiving MMS, find "All Settings" in the system settings, then go to "Mobile Network" and finally turn on "Always Receiving MMS".

6 ask the operator

Ask the operator whether the mobile Internet service has been started. MMS can only be sent successfully if it has the function of "surfing the Internet by mobile phone". Moreover, there is no traffic charge for sending MMS, and operators charge according to the number of MMS.

7 Check the attachment size

Is the attachment you selected large? Generally speaking, operators have restrictions on the size of pictures sent by MMS. Please consult your operator for details.

8 replace the SIM card

Finally, I suggest you change the SIM card of different operators and try to send it. If the problem persists, please clear all the data after backing it up and try to send it again.