What is the major of electronic control?

What is the major of electronic control?

Using low voltage, low power consumption and safe electrical components to control high power and mechanical equipment is called electrical control. Learning how to control the circuit is called electronic control major.

What is the major of electronic control?

I'm sure I didn't learn electronics upstairs. Electronics does not include electronic control. However, the electric control mentioned by the landlord does not have this major. As far as I know, it should be in the Department of Mechanical and Electrical Engineering. I don't know what my major is.

What is an electronic control engineer?

He is an engineer in electrical control.

What's the difference between electronics major and electrical major?

There is no electrical major in Peking University. Electrical specialty emphasizes engineering, and high voltage is electrical specialty with high voltage, such as industrial power station, motor, heat engine and so on. . Electronics belongs to light industry, also known as information industry (IT industry), and often refers to weak current with voltage below 36V, such as mobile phones, household electronic products, computer hardware, embedded chips and so on. I mainly study chip design, circuit design, radio communication, microwave, satellite communication, communication algorithm and so on. Peking University not only has a major in electronic information, but also has a strong strength. The Department of Electronics of Peking University is the radio department first established in the 1950s in New China, and now it has developed into a comprehensive department. Eecs, eecs, has three state key laboratories 1 each. There are four first-level disciplines (computer science and technology, information and communication engineering, electronic science and technology, physics), 1 1 two disciplines (computer software and theory, computer architecture, computer application technology; Communication and information systems, signal and information processing; Electromagnetic field and microwave technology, microelectronics and solid-state electronics, physical electronics, circuits and systems; Radio physics, acoustics). Among them, five two disciplines were rated as national key disciplines in 2002. The College has three state-level key laboratories-the state-level key laboratory of visual and auditory information processing, the state-level key laboratory of regional optical fiber communication network and new optical communication system (Peking University) and the state-level key laboratory of micron and nano processing technology, five key laboratories of ministries and municipalities, and several joint laboratories established in cooperation with internationally renowned companies and scientific research institutions. He has undertaken more than 280 national scientific research projects, which belong to the national key scientific and technological research plan, the national key basic research and development plan (973), the national high-tech research and development plan (863), the national climbing plan, the national natural science foundation and other national scientific research plans, with an average annual research funding of more than 60 million, and published more than 500 papers in core journals at home and abroad every year. At present, there are 93 doctoral supervisors in our college, and about 400 graduate students are enrolled every year. Postgraduate teaching has a perfect training system, implements postgraduate management with the institute as the unit, and formulates postgraduate thesis standards for various disciplines. There are 80 postgraduate courses, and courses are selected among different disciplines. The study period for general master students is 3 years, and for in-service graduate students is 4 years; The study period of doctoral students is generally 4-6 years. Master's and doctor's graduates in our college can find an ideal home through their own efforts. Most master graduates choose to pursue doctoral studies or go abroad for further study, and the rest are mostly employed in developed cities such as Beijing, Shanghai and Shenzhen. Some doctoral graduates choose to teach in universities, some to engage in scientific research in scientific research institutions, some to be postdoctoral or to work in large companies at home and abroad, and party and government organs all hold posts. View original post >>

What does electronic technology major mean?

Employment destination

Graduates of this major have the adaptability of engineering technology in a wide range of fields, wide employment, high employment rate, strong practical ability and fast work, and can engage in the production, management, technical management and development of electronic products in electronic information-related enterprises. Mainly for electronic products and equipment manufacturers and business units, engaged in various electronic products and equipment assembly, debugging, testing, application and maintenance of technical work, but also for some enterprises and institutions, for some electromechanical equipment, communication equipment and computer control equipment safe operation and maintenance management.

Enterprise demand

Due to the arrival of the information age, it is speculated that such talents will still be in short supply for a long time.

According to the survey, there is a huge demand for electronic information engineering talents at this stage, and it is necessary to set up the specialty of "electronic information engineering" to alleviate the contradiction between supply and demand of such talents at present.

Electronic information engineering professionals have become the focus of talent demand in the information society.

Electronic information industry is a high-tech industry, which is called sunrise industry. According to the analysis of the Ministry of Information Industry, the Tenth Five-Year Plan period is a crucial period for the development of electronic information industry in China. It is predicted that the electronic information industry will still develop at twice the speed of economic growth, and the industrial prospect is very broad.

The future development focuses on electronic information product manufacturing, software industry and integrated circuit industry; Emerging communication services, such as data communication, multimedia, Internet, telephone information services, mobile phone short messages and other services will also expand rapidly; Also worthy of attention are cultural and technological industries, such as online games. At present, there are four kinds of talents supported by information technology: troubleshooting, equipment and customer service, software and hardware installation, configuration update and system operation, monitoring and maintenance. In addition, there is a great demand for e-commerce and interactive media, database development and software engineering.

Future prospects

Electronic information engineering is a subject that uses modern technologies such as computers to control and process electronic information. It mainly studies the acquisition and processing of information, the design, development, application and integration of electronic equipment and information systems. Now, electronic information engineering has covered many aspects of society, such as how to deal with all kinds of telephone signals in telephone exchanges, how to transmit our voices and even images by mobile phones, how to transmit data in the networks around us, and even how to keep the information transmission of the military secret in the information age. We can learn some basic knowledge to understand these things, and we can apply more advanced technology to develop new products.

Electronic information engineering major is to learn basic circuit knowledge and master the method of processing information with computer. First of all, we must have solid mathematical knowledge and high requirements for physics, mainly electricity; Learn many basic courses such as circuit knowledge, electronic technology, signal and system, computer control principle, communication principle, etc. To study electronic information engineering, you have to design, connect some circuits and conduct experiments with computers. The requirements for hands-on operation and use of tools are also relatively high. For example, I will connect the circuit of the sensor myself, build a small communication system with a computer, visit the electronic and information processing equipment of some big companies, understand how the mobile phone signal and cable TV are transmitted, and have the opportunity to participate in large-scale engineering design under the guidance of teachers. To learn electronic information engineering, you should like to study and think, and be good at finding problems with your brain.

With the deepening of social informatization, most industries need high-paid electronic information engineering professionals. After graduation, students can engage in the design, application development and technical management of electronic equipment and information systems. For example, being an electronic engineer, designing and developing some electronic and communication equipment; Be a software engineer, design and develop all kinds of hardware-related software; Being a project supervisor and planning some large-scale systems requires high experience and knowledge; You can also continue to study as a teacher and engage in scientific research.

China's information industry has a history of ten years. New things and sunrise industries always attract attention. It is for this reason that computer science has quickly become a hot major in colleges and universities. Many students sharpen their heads and drill into the ivory tower, either for interest, to master a skill to make a living, or for better and faster development in the future.

Compared with the popularity of computer major in previous years, the choice of this major has gradually become rational and objective in recent years. Students and parents are more concerned about a starting point that is more conducive to personal long-term self-development.

There must be more fresh graduates in the choice of career direction ... >>

What's the difference between electronics major and electrical major?

Young man, you are ready so early. Now let's learn your major well.

You will know your problem thoroughly. Different schools have different classifications of professional cartography in Sichuan, so there is no need to make a fuss. To put it bluntly, I am majoring in electrical engineering and automation, belonging to the Department of Electrical Engineering, including electronic information and communication engineering.

According to your in-depth study and professional understanding, you may change your mind, so you don't need to know too much now. Everyone's ideas are updated with time. Take my experience as an example. I also study electrical engineering. Later, I studied electrical engineering and was controlled by other students.

What is the major of electronic information technology?

There is a great difference between electronic information technology (secondary school) and (junior college). You can't get the certificate of "Hehe" if you learn the basics of electronic circuits, circuit analysis, electronic technology and television technology. In the university (that is, junior college), you will learn electronic CAD, digital signal processing, C language, the principle and application of single chip microcomputer, depending on where you want to develop, and you will take the high-voltage intermediate electrician certificate. Microelectronics is to learn digital signal processing, C language, the principle and application of single chip microcomputer. These assistant engineers will be very popular if they learn single chip microcomputer well. I have a monthly salary of at least 5000 yuan in Zhejiang ~ ~ ~ I study microelectronics, but unfortunately the single chip microcomputer is not very good. Now I'm painting PCB in the factory, just muddling along ~ good luck, come on ~

What is the major of automatic control?

Overview:

Automation majors mainly study the principles and methods of automatic control, automation unit technology and integration technology and their applications in various control systems. Based on the theory of automatic control, it takes electronic technology, power electronics technology, sensor technology, computer technology, network and communication technology as the main tools, and faces the automatic control of industrial production process and the automation of various industries and departments. It has the distinctive characteristics of "combining control with management (science), paying equal attention to strength (electricity) and weakness (electricity), and paying equal attention to software (components) and hardware (components)", and is a large-caliber engineering major with interdisciplinary science, engineering, literature and management. After graduation, students can engage in technical work in automatic control, automation, signal and data processing and computer application. Employment fields are also very extensive, including high-tech companies, research institutes, design units, universities, financial systems, communication systems, taxation, foreign trade, industry and commerce, railways, civil aviation, customs, industrial and mining enterprises, and science and technology departments. First, the professional basic situation

1, culture target

The students trained in this major should have engineering technical foundation and certain professional knowledge in a wide range of fields, such as electrical technology, electronic technology, control theory, automatic detection and instrument, information processing, system engineering, computer technology and application, network technology, and be able to engage in system analysis, system design, system operation, scientific and technological development and research in the fields of motion control, industrial process control, power electronics technology, detection and automation instrument, electronics and computer technology, information processing, management and decision-making.

2. Training requirements

Students in this major mainly study basic theories and knowledge such as electrical technology, electronic technology, control theory, information processing, system engineering, automatic detection and instrumentation, computer technology and application, and network technology. , and trained in engineering practice; Have the basic ability of system analysis, design, development and research. Graduates should have the following knowledge and abilities:

Solid foundation in natural science, good foundation in humanities and social sciences, and strong comprehensive foreign language ability;

Master the extensive technical basic theoretical knowledge necessary in this professional field, mainly including circuit theory, electronic technology, control theory, information processing, computer software and hardware foundation and application. Have a good understanding of motion control, industrial process control and automation instruments, power electronics technology and information processing, have professional knowledge and skills in this professional field 1-2, and understand the frontier and development trend of this professional discipline;

Get good engineering practice training in system analysis, system design and system development;

Have certain scientific research, scientific and technological development and organizational management capabilities in this professional field, and have strong work adaptability.

3. Main disciplines

Control science and engineering, electrical engineering, computer science and technology.

Step 4: Main course

Circuit principle, electronic technology foundation, computer principle and application, computer software technology foundation, process engineering foundation, motor and electric drive foundation, power electronics technology, automatic control theory, signal and system analysis, process detection and instrumentation, operational research, computer simulation, computer network, process control, motion control, system identification foundation, computer control system and system engineering introduction.

5. Study time

Four years.

6. Degree situation

Bachelor of Engineering.

7. Related majors

Electrical engineering and its automation.

8, the original professional name

Fluid transmission and control (part), electrical technology (part), automation, industrial automation, automatic control, aircraft guidance and control (part).

Second, the professional comprehensive introduction

For a high school student, the major of "Automation" may be a bit confusing, but if you ask college students or graduates about this major, I think they will give you a thumbs up and recommend this major. Why? Generally speaking, there are several reasons: first, it belongs to the information industry. Information industry, known as "sunrise industry", has become the trend of science and technology development because of its rapid development, high demand for talents and high treatment. Therefore, as an important member of the information industry, automation specialty is also promising. Second, automation has a wide range of applications. At present, almost all industrial sectors can be linked with automation, and modern agriculture and national defense are also closely related to automation. Third, this major is very beneficial to personal development. The courses of this major cover a wide range, and what you learn overlaps with other disciplines. This is also related to the background of this major. Most automation majors ... >>

What professional discipline does electronic application technology belong to?

It belongs to the main courses of science and engineering: circuit analysis foundation, analog electronic technology, digital electronic technology, automatic test and detection technology, electronic product principle and maintenance, single chip microcomputer principle and application, electronic production technology, computer-aided circuit design, surface mount technology of PLC, microcomputer principle, assembly and interface technology, production and quality management, analog electronic technology training, digital electronic technology training, electronic skills training, Electronic product principle and maintenance training, electronic production technology training, single chip microcomputer principle and application training, computer-aided circuit design training, automatic test and detection technology training, surface mount technology training, PLC programmable controller training, microcomputer principle training, assembly and interface training, etc.

Social status and employment prospects: With the rapid development of electronic technology, the coverage of electronic products is getting wider and wider, and the fields involved are getting wider and wider. These products have entered thousands of households, and their technical management such as production, inspection, installation, debugging and maintenance has provided broad employment space for graduates of this major. The demand for talents in the electronics industry is large and diverse. After the systematic study of basic theory courses and specialized technical courses, as well as the training of basic skills, special arc energy and comprehensive skills, students' job objectives can be positioned in the following aspects: 1 Electronic product manufacturing enterprises: engaged in technical guidance, production line management and product inspection of electronic product production lines; Installation, operation, maintenance, repair and measurement of production line instruments and equipment. 2. Electrical appliance sales and maintenance company: engaged in after-sales services such as promotion, installation, debugging and maintenance of electrical products. 3. Some excellent students can participate in the research and development of electronic products, digest, absorb and utilize advanced technologies at home and abroad. Main positions: small electronic product design, unit circuit development, etc. Such as electronic product assemblers, electronic product debuggers, quality inspectors, technicians, etc.

Secondary positions: maintenance of electronic equipment, after-sales technical support of electronic products. Such as: maintenance workers, technicians, instrument workers.

What is the major of electronic information?

Now basically a school has computer, electronic information and other related majors. If you don't have a particularly strong interest or talent in computers or electronics, I advise you to change your major, but then again, you can succeed as long as you are willing to do anything with your heart. The key is to grasp yourself, not your major.