Glory 9x boot is not normal.

If the phone can't be turned on, you can try the following methods:

1: When the phone is turned on, the screen is black, but it rings or vibrates.

It may be a screen problem. Please bring the relevant purchase voucher to the nearby service center for testing. If you haven't backed up your data before, your data may be lost.

2: When the phone is turned on, the screen is black, there is no response, or the red light flashes, or it is turned off immediately after the phone is turned on.

① It is recommended to hold down the volume down button and the power button at the same time 10 seconds or more, and try to restart the mobile phone forcibly.

② The battery may be dead. It is recommended to use a standard charger to charge continuously for more than 30 minutes, and then try to start the machine.

3. Boot into UI interface, upgrade interface, recovery interface, robot interface and quick boot interface.

It may be caused by accidentally pressing the combination key of the power-on key and the volume key and then entering the special mode. It is recommended to hold down the volume down button and the power button 10 for more than a second, and try to restart the mobile phone forcibly and enter the mobile phone desktop normally. In order to avoid this situation in the future, it is recommended to check whether the key is easy to get stuck or whether the protective shell is pressed against the key.

4. If the above methods can't solve the problem or the above scenario, please try to solve it according to the following general methods:

The following methods may erase your personal data, please choose carefully. If the mobile phone can be turned on, it is recommended to back up the data immediately, and QQ and WeChat should be backed up separately.

① Please connect the mobile phone to the charger or computer USB with the data cable, and press and hold the volume increase button+power button for at least 30 seconds. Please confirm whether you can enter the system recovery mode. If possible, connect to the WLAN network and follow the prompts to restore the system.

② Please press and hold the volume up button and the power button at the same time for at least 30 seconds (without inserting USB). Please confirm whether you can enter the factory recovery mode. If possible, please restore the phone to the factory settings.

If it still can't be solved, please bring the relevant purchase voucher to the nearby service center for maintenance. If the data has not been backed up before, the data may be lost.