Modification of dopod s 1 elite mobile phone registration form

The registry of WM6 can be roughly divided into the following four groups:

HKEY _ Class _ Root:

Used to put some definitions of data, such as the association of file extension, the category of data and so on.

HKEY current user:

This area is used to store some data and settings of each user, because the architecture of Windows Mobile is still similar to NT, and all users are different. This is where these things are recorded.

HKEY _ Local _ Machine:

This area is the setting of the placement system. Software and hardware are put here, just like the meaning of its local machine.

HKEY _ User:

Some data used to store users themselves are generally useless unless a program is written.

(It is recommended to back up the registry before modification)

No. 1: HKEY _ local _ machine/system /storagemanager/fatfs view value /EnableCache: change the original value of 1 to 33.

Second place: HKEY _ Current _ User/Control Panel/WiFi/ePolparam1and EapolParam2 have two double-byte values respectively, and all four items are changed to 256.

Number 3: HKEY _ Local _ Machine/Security /WAP View Value/Network Count: Change the double-byte value of 0 to 128.

Open SMS receipt:

[HKEY _ Current _ User \ Software \ Microsoft \ Inbox \ Settings]

" SMSDeliveryNotify " = dword:0000000 1->； 0 disabled, 1 enabled.

Improved system display acceleration

Open: you can increase the value of "limit" (generally 6 1440) under \ HKEY _ local _ machine \ system \ GDI \ glyphcache. I changed it to 92 160 and the effect was very obvious. It is not recommended to increase it any more, but I didn't find any problems when I increased it to (120000)! Timid change (76800)! The principle is to increase the pre-read memory of the system graphics card, which can optimize the effect very well!

Perfect increase in running memory (integrating storage into main memory), so that your system will no longer worry about insufficient memory!

Open the registry editor and find: HKEY _ localmachine \ drivers \ builtin \ flshdrv, and change the following key FolderName from "storage" to "program file".

Change the name of the program file that comes with the system at will, then restart the machine, and then delete the folder with any name, and it will be OK. However, before deleting the program files folder of the system, please remember to copy the connetion and windows media player folders, and then copy them to the new program files(storage) folder. It is recommended to restart the machine before operation, and leave a clean folder after all the files in the system program files are deleted, so as not to affect the normal operation of the system because of some system fragment files! ! ! (Of course, you don't have to hard boot, just delete everything in the storage. )

Automatically release system resources to solve the problem of serious shortage of system resources.

In Windows-Mobile, every time a program is run, the system resources will be reduced. Some programs will consume a lot of system resources. Even if the program is closed, there are still some useless DLL script files running in the memory, which will slow down the running speed of the system. However, by modifying the registry key value, we can automatically clear the useless DLL files in the memory after closing the program and recover the consumed system resources in time! Open the registry editor, find: HKEY _ local _ machine \ software \ Microsoft \ Windows \ currentversion primary key, create a key value under it and name it "explorer", then create a new string value under "explorer" and name it "always sunloaddll", and then write the key value of "always sunloaddll" as "65438+".

Increase PPC volume

The value of the Vol item under HKEY _ Current _ User \ Control Panel \ Phone \ is increased.

The default value is 6666 (hexadecimal), but it can be changed to 8888 (hexadecimal). The soft start system works, and the volume is obviously enhanced without interruption.

The preset values of subsystems of other vehicles may be different, which can be increased by 5%~20% based on the preset values as needed.

Locate the registry: HKEY _ Current _ User \ Control Panel \ Sound Category.

The following key values include "ringtone preview", "ringtone" and "InCall", which respectively correspond to the settings of ringtones such as audition and incoming call.

Look for the key value: InitVol, change it to "6", and don't change it too big (it may damage the speaker).

Then the value of the Vol item under HKEY _ Current _ User \ Control Panel \ Phone \ is increased to 8888, and the default value is 6666. After the change, the soft start bell will become louder.

Change the title bar time display information (format):

HKEY _ LOCAL _ MACHINE \ Software \ Microsoft \ Shell

Under the new DWORD value named TBOpt,

= 0 Do not display any date and time information;

When = 1, only the time is displayed;

When = 2, only the date is displayed;

= 3 Displays the date and time.

Screen message "SMS sent":

Modify the registry key _ local _ machine/software/Microsoft/inbox/settings ssmsnosentmsg "and change the Dword value from 0 to 1. It can be started by soft start.

Delete the security warning when running the program for the first time:

HKEY _ LOCAL _ MACHINE \ Security \ Policies \ Policies \ 0000 10 1a

When = 1, no warning message is displayed;

= 0 Restore display.

Change the functions of the two touch soft keys at the bottom of the screen:

Left key:

HKEY _ current _ user \ software \ Microsoft \ today \ keys \112 \ open = "\ Windows \ calendar.exe" (function)

Default= "Calendar "(display text information)

Right click:

HKEY _ Current _ User \ Software \ Microsoft \ Today \ Keys \113 \ Open = "\ Windows \ Start Menu \ Programs \ Contacts. lnk"

Default= "contact "(display text information)

Specify GPS port settings for the program

Restarting after modification will increase the GPS setting options in Settings/Connections.

Add keys and values: HKEY _ Local _ Machine \ Control Panel \ GPS Settings \ Group = 2.

Key type: DWORD

Delete or rename: HKEY _ Local _ Machine \ Control Panel \ GPS Settings \ Redirect.

network

If the GPRS network you are connected to supports EDGE, the original "G" on the title bar will be replaced by "E". This change will not affect the actual GPRS network type, just tell you whether the connected network is ordinary GPRS or EDEG. (EDGE is also called 2.75G, which is faster than ordinary GPRS). Same as 6. HKEY _ Local _ Machine \ Driver \ Built-in \ RIL \ enableddiffergprsedgeicon.

= 1 is the actual display;

=0 is always displayed as "g"

After GPRS connection, click the connection icon "G" or "E" in the title bar to add the "Disconnect" button and the actual accumulated connection time information, as shown in the screenshot.

HKEY _ LOCAL _ MACHINE \ control panel \ Phone \ flags 2

= 16 Add the "Disconnect" button and the display of accumulated connection time (16 is the hexadecimal value of 16);

=0 Neither is displayed;

= 8 to add a Disconnect button.

Speed up the internet.

The key values of TcpMaxConnetctRetransmissions in HKEY _ Local _ Machine \ Communication \ tcpip \ parms are decimal 10 and hexadecimal A.

Change the date and time display format

However, this will change the short date format when other applications (such as Resco explorer) display file information.

HKEY _ LOCAL _ MACHINE \ nls \ overrides \ SSDte

=ddd/d

Day/date

Modify the ringtone path

HKEY _ Current _ User \ Control Panel \ Sound Category \ Ringtone \ Directory = \ Memory Card \ My Music

Not in favor of changing it into a card. Try to put it on the machine.

There are two other ways to prevent the CAB format installation file from being automatically deleted by the system after installation:

HKEY _ local _ machine \ software \ apps \ Microsoft application installer \ nddynamicdelete.

= 0 will not be deleted automatically;

= 2 Default automatic deletion

HKEY _ class _ root \cabfile\Shell\open\command

= wceload.exe "%1"/nodelete will not be deleted automatically;

= wceload.exe "%1"is automatically deleted by default.

Whether to prompt cover the installation again when installing the application repeatedly:

HKEY _ Local _ Machine \ Software \ Apps \ Microsoft Application Installer \fAskOptions

= 1 prompt;

= 0 Do not prompt

Add a shortcut to set up a wireless network card (WiFi) in the desktop "Today"

Just like Bluetooth, it is only suitable for computers with WiFi, such as 838 and 830, and the effect needs to be evaluated. However, it has been confirmed that there are netui.dll files under Windows.

HKEY _ LOCAL _ MACHINE \ Software \ Microsoft \ Today \ Items \ " Wireless "

DLL=netui.dll

Order =0

Enabled = 1

Type =4

Option = 1

Cancel online charging when synchronizing online.

However, although this is Microsoft's standard character key, the test on T-MDA-II is invalid. What about other brands?

HKEY _ LOCAL _ MACHINE \ Drivers \ BuiltIn \ usbfndrv \ EnableUsbCharging

= 1 charging;

= 0 free

Whether to maintain GPRS connection status after startup:

HKEY _ local _ machine \ comm \ Connmgr \ providers \ {7c4b7a38-5ff7-4bc1-80f6-5da7870bb1aa} \ Connections \ | Connection name |\AlwaysOn

= 1 always connected;

=0 boot does not connect automatically.

Connection name refers to the specific connection name set on the mobile phone, such as China Mobile CMWAP, which varies according to the actual situation; Moreover, all connections will be displayed, and unused connections can be deleted, which is equivalent to setting or deleting on the settings panel.

Methods of "Clear Memory" and other dangerous options in screening settings.

HKEY _ LOCAL _ MACHINE \ Control Panel \

Most of the following options are in the phone settings. Most options have a key: Group, which appears in the "personal" column when it is equal to 0; When it is equal to 1, it appears in the "System" column; When it is equal to 2, it appears in the Connection column; When it is greater than 2, it will not appear anywhere! Therefore, it is much better to modify than to delete the corresponding CPL file directly-just change one every day! So, to block the "clear memory", it is changed to this:

HKEY _ local _ machine \ ControlPanel \ Clear Storage \ Group

=3

Modify the registry to improve the running speed of the machine:

Modify the registry HKEY _ local _ machine \ system \ storage manager \ fatfs \ enablecache.

Change the original value of 1 to 3, and 3 is the recommended value. Theoretically, the higher the value, the faster the speed. I changed it to 6, no problem was found, and the speed level was greatly improved!

1. Some modifications to improve performance (mainly cache, depending on the ROM version, some keys may not be found in the registry, so just create new ones).

HKEY _ LOCAL _ MACHINE \ System \ storage manager \ FATFS \ CacheSize = 8 192

HKEY _ LOCAL _ MACHINE \ System \ storage manager \ FATFS \ enable cache = 1

HKEY _ LOCAL _ MACHINE \ System \ storage manager \ Filters \ fsreplxfilt \ ReplStoreCacheSize = 8 192

HKEY _ LOCAL _ MACHINE \ System \ storage manager \ Profiles \ ms flash \ FATFS \ Filters \ data cachesize = 8 192

HKEY _ LOCAL _ MACHINE \ System \ storage manager \ Profiles \ ms flash \ FATFS \ Flags = 40

How to modify the shutter time of 830 camera

Find HKEY local machine >; Software & gtHTC & gt camera & gtCaptparam, change the original delay time from 10 to 2, restart and finish.

Speed up the switching speed of input method

Export the contents of the input method registry with the registration tool of Resco, and solve the problem after re-importing.

(Export the registry of HKEY _ class _ root CLSID. My computer is D830, and some brothers report that this item is not in the registry of my computer. Please find the registry content of the input method part in your computer, export and import it, and the estimated effect is the same. )

China Mobile changed its name to China Mobile.

Under hket _ local _ machine \ system \ state \ phone, change the string value Current Operator Name to "China Mobile" to modify the registry to extend the standby time.

Revise as follows:

1.[HKEY _ LOCAL _ MACHINE \ Comm \ async MAC 1 \ Parms]

" DisablePowerManagement " = dword: 1

Revised as: "Disable power management" = dword: 0

2.[HKEY _ LOCAL _ MACHINE \ Comm \ irsir 1 \ Parms]

" DisablePowerManagement " = dword: 1

Revised as: "Disable power management" = dword: 0

3.[HKEY _ LOCAL _ MACHINE \ Comm \ PPTP 1 \ Parms]

" DisablePowerManagement " = dword: 1

Revised as: "Disable power management" = dword: 0

4.[HKEY _ LOCAL _ MACHINE \ Comm \ L2TP 1 \ Parms]

" DisablePowerManagement " = dword: 1

Revised as: "Disable power management" = dword: 0

Change IE cache to card

WM5 is initially set to:

[HKEY _ Current _ User \ Software \ Microsoft \ Windows \ Current Version \ Explorer \ Shell Folder]

" Cookies " = " \ Windows \ Profiles \ guest \ Cookies "

" History " = " \ Windows \ Profiles \ guest \ History "

" Cache " = " \ Windows \ Profiles \ guest \ Temporary Internet Files "

Change IE cache to card:

"Cookies" = "\ memory card \ temporary \ guests \ Cookies"

"History" = "\ memory card \ temporary \ visitor \ history"

"Cache" = "\ memory card \ temporary \ guest \ temporary Internet file"

Optimize the speed of input method

Registry: HKEY _ Current _ User/Control Panel/Accessibility/

Modify these two word strings chartimeout and holdtimeout.

The Chartimeout value is the time to be selected by the English input method (that is, the time when the first letter of the key appears and there is a horizontal line below after the key is pressed, and the second letter and the third letter can be selected by pressing the key several times); Holdtimeout is the time required to select Chinese characters when inputting Chinese.

Chartimeout is usually 400-500, and then you will be in a hurry. Holdtimeout suggests 200-300, or even lower.

The default values to be changed back are 10000 and 800.

Change reminders and the number of reminders.

HKEY _ Current _ User

Control panel-sound-clock-script: apw3pr (alarm clock)

-Reminder-Script: apw3pr (Reminder)

-callwaiting-script:apw3pr (call waiting)

In addition: if there is no such key value, create a new one. The number after w is the interval of seconds, which can be decided by yourself. R is the number of repeated rings before the key is cancelled.

At startup, change the order of the shortcuts of the first few items in the start menu and the default desktop shortcuts.

HKEY _ Current _ User

Software-Microsoft-Shell-Start Menu-Orders

-startmru-initialorder

The key values of the above two primary keys are all available. Lnk file, the above is a shortcut to the first few items of the start menu. To change their order, just find the. The lik file is placed in the storage\windows\start menu folder, and the original key value of the primary key is replaced by the items that need to be arranged before *. In fact, there is a simpler way: create several folders for programs and communications. In the storage\windows\start menu folder, move the unused. Lnk file, leaving only. If you want to put the lnk file in front, you will naturally get to the first page. )

Change the storage location of ringtones. First, create a folder on the sd card, such as \ memory card \ ring.

HKEY _ Current _ User

Control Panel-Sound Category-Notification-Directory: \ Memory Card \ Ringtone \ (SMS)

-Ringing-Directory: \ Memory Card \ Ringing \ (Phone)

-Reminder-Directory: \ storagecard \ ring \ (Reminder)

-alarm clock directory: \ memory card \ ringtone \ (alarm clock)

Increase the size of the system font

HKEY _ Current _ User

Control Panel-Accessibility -fontsize:3

Generally, it is good to change it to 3. It's too big to display several lines on one page.

Modify "GSM"

HKEY _ Current _ User \ Software \ Microsoft \ Home \ Key \ 1 13

Default = GSM

open = \ Storage \ windows \ short _ press . lnk

Modify the capacity of the call record

Open the Registry Editor,

\HKEY Current User \ Control Panel \ Phone \

CallHistoryMAX suggests 200-500 for the value you want under "numerical data" If it is too big, it will drive a little slowly.

Change the default storage location of MMS.

Click "View" in the HKEY _ Local _ Machine \ Software \ Arcsoft \ Arcsoft mmsua \ config \ folder, and the following items will appear.

CannedTextFile path: \ storage \ program files \ Arcsoft \ Arcsoft mmsua \ cannedtext.txt (common phrase)

UAContentsPath path: \ storage \ my documents \ uacontents \ mmsua (MMS storage location).

Unknown path: \ storage \ my documents \ file of unknown type.

VideoPath path: \Storage\My Documents (where the video file is saved).

AudioDecPath path: \Storage\Windows (audio playback support)

SoundPath path: \Storage\My Documents (location where audio files are saved).

VideoDecPath path: \Storage\Windows (video playback support)

PicturePath path: \ storage \ my documents \ my pictures (the location where the picture file is saved).

How to change the name of China Mobile?

Create a new string under the name of HKEY _ local _ machine \ software \ Microsoft \ RIL \ operator, fill in the network number "46000" of China Mobile, and fill in the characters you want to display casually for the numerical name. Unicom's network number is 4600 1.

Turn off the sound of the pop-up menu

HKEY _ Current _ User

-& gt； control panel

-& gt； sound

-& gt； Menu pop-up

-& gt； sound

Change numerical data to * None *

Turn off the sound of the lower menu of the pop-up menu.

HKEY _ Current _ User

-& gt； control panel

-& gt； sound

-& gt； menu commands

-& gt； sound

Change numerical data to * None *

Method for modif startup screen in registry

(Image size should be 176*220)

Use the registry software HKEY _ local _ machine \ software \ Microsoft \ splash screen to modify or add the following four string values (set the path of your own picture).

MSBitmap carrier bitmap MSshutdownBitmap carrier shutdown bitmap

The display order of pictures is four items from left to right, that is, MSBitmap is displayed first and then CarriersShutdownBitmap is displayed on the startup screen, and MSshutdownBitmap is displayed first and then CarriersShutdownBitmap is displayed on the shutdown screen.

Note: Check the external sd card after booting, so please don't put the boot screen in the external sd card. Otherwise, the system will automatically call the default picture.

There are also two DWORD parameters-carriershuttowntimeout msshutdowntimeout.

Set the delay time of the shutdown screen respectively.

Change the sound of the smartphone system

First, open the Registry Editor, and the path is: HKEY _ Current _ User/Control Panel/Key under Sound:

Telephone failure

Call waiting (call waiting)

alarm clock

Congestion (busy tone)

Disconnect (end of recording)

e-mail

instant message

network connections

Network hang-up

Dial (start recording)

Interrupt (disconnect)

Low battery (battery warning)

Menu popup (popup menu)

Menu command (option ok)

Start network connection

Netend (disconnect from the network)

Network connection acceptance barrier

Password (command passed)

Ring 0( 1 ring of the line)

Ringtone1(ringtone of line 2)

SMS (short message)

System asterisk (sigh)

.......... Default (System Error Warning)

.......... destroys (sighs)

.......... hand (exclaim)

.......... problem (problem)

Toolkit (STK service)

VotceMail (voice message)

Telephone dial-out

VrecEng (call ended)

Warning (system reminder)

Change the 50KB limit of MMS

First, enter the registration form HKEY _ local _ machine-software-Arcsoft-Arcsoft MMS us-config-ui-size limit-and change the numbers in senddefault and sendlimit5 to 1024000 according to the view, and then you can change the sending limit to 1m, because 1M is equal to 65438.

Turn off the boot screen and music.

Open Registry Editor and locate the branch.

HKEY _ LOCAL _ MACHINE \ software \ HTC \ startup anim

Then delete the key values of the strings Audio and Video.