How does Weifang Chaiwei Leiwo Heavy Industry drive a forklift?

Shandong Weifang Chai Wei Lei Wo Heavy Industry opens the forklift as follows.

1. Forklift start: Before starting, look around to make sure there are no obstacles that hinder driving safety, and then honk the horn before driving. For vehicles with hydraulic (pneumatic) braking, the brake fluid pressure (pneumatic) meter must be able to start safely. When the loader is started, it should be confirmed that the loading is stable and reliable. Start slowly and smoothly.

2. Drive smoothly. When driving, the height of the fork bottom from the ground should be kept at 300-400mm, and the gantry should be backward. Don't put the fork too high while driving. When entering the work site or driving, pay attention to whether there are obstacles scraping. When loading goods, if the fork rises too high again, it will increase the height of the overall center of gravity of the forklift and affect the stability of the forklift. After unloading the goods, put the fork in the normal driving position before driving. When turning, if there are pedestrians or vehicles nearby, you should signal a high-speed sharp turn. A sharp turn at high speed will make the vehicle lose its lateral stability and tilt. When loading goods downhill, the forklift should reverse to prevent the goods from reversing.

3, forklift operation, strictly install forklift operating instructions. Before the electric forklift is used or charged, it is necessary to check the battery liquid of the forklift that cannot exceed the rated load before use, and replenish it with distilled water when it is insufficient. When charging the electric forklift, keep the surroundings dry, well ventilated and away from flames. If the forklift is not used, the goods should be unloaded from the forklift and the number of forklifts should be reduced as much as possible.