How to illustrate in PS? Use PS to make a simple Teacher’s Day greeting card. Use PS to make a greeting card.

Ask for a tutorial on basic Photoshop teaching. I will send you a copy of my notes. I hope it will be helpful to you. PHOTOSHOP (starting on 3.13) 1. Press Ctrl+Alt+Shift during startup to restore PS to Default settings (PSD) 2. Adobe: Adobe USA 3. New file 1. File\New (Ctrl+N) 2. Hold down the Ctrl key and double-click the mouse in the workspace 3. 1 inch = 2.54cm1 Feet = 30.5cm IV. Picture formats jpg, bmp, gif, tiff Note: GIF format supports transparency and tiff format is mainly used for printing. 1. Open the layer panel: F72. Create a new layer: Ctrl+Alt+Shift+N (none) Ctrl+Shift+N (yes) 3. Change the layer name: 1) Double-click on the layer name 2) Right Right-click on the layer\Properties 5, RGB color mode (0~255) R: Red (red) G: Green (green) B: Blue (blue) R=G=B=0 (black) = 255 (white) 6. Rectangular and Elliptical Marquee Tools 1. Fill object with foreground color: Alt+Del/Backspace 2. Back: Ctrl+Del/Backspace 3. Undo multiple times: Ctrl+Alt+Z (default 20, up to 1000 steps )4. Cancel selection: Select\Deselect (Ctrl+D) 5. Load selection: Hold down the Ctrl key and click the mouse on the layer to load all the objects in this layer into the selection. 6. When drawing a selection, hold down the space bar to move the selection being created. Hold down the Alt key to draw a selection with the clicked point as the center point of the object. Hold down the Shift key to draw a positive selection (provided that There is no selection in the canvas) 7. If there is already a selection in the canvas, press Shift to add a selection, press Alt to subtract a selection, and press Alt+Shift to transfer a selection. 8. The prerequisite for pulling the auxiliary line is to display the ruler, that is, Ctrl+R (View\Show Ruler). 9. When pulling the auxiliary line, hold down the Alt key to pull the vertical auxiliary line on the horizontal ruler. Otherwise, hold down the Shift key. You can align the pulled auxiliary lines with the scale. 10. Change the color of the auxiliary line: 1) Use the move tool to double-click it 2) Edit\Presets\Guide Lines and Grid 11. Press the Del key to delete the pixels within the selection (normal layer). If you delete it on the background layer , it will be deleted to the background color 12. Convert the background layer to a normal layer: Double-click 13. Convert the normal layer to a background layer: Layer\New\Layer Background 14. Characteristics of the background layer: Located at the bottom of all layers , layer styles cannot be added, objects inside cannot be moved, opacity cannot be added, and there are no transparent areas. 15. Full canvas display: Ctrl+0 (equivalent to double-clicking the gripper tool) 16. Feathering (0~250): Make the edges of the selection soft. 17. Inverse selection: Select\Inverse selection (Ctrl+Shift+i) 18. Single-line tool: The height is 1px and the width is the width of the canvas; the width of the single-line tool is 1px and the height is the height of the canvas. 6. Move tool (V) 1. When using other tools (except path-related tools), hold down the Ctrl key to temporarily switch to this tool. 2. Hold down Shift to move the object, which can move horizontally, vertically, or 45 degrees. Object, hold down Alt to copy the object 3. Invert: Image\Adjustment\Invert (Ctrl+I) 5. Invert: Let the complementary color of this color show itself (R) Red <---> Cyan (C) (G) Green <---> Magenta (M) (B) Blue <---> Yellow (Y) 6. CMYK color mode (0%~100%) This color mode is commonly used in printing The commonly used color mode is also called "four-color printing". The four colors represent the four inks in printing. C: cyan (cyan) M: Magenta (magenta/magenta) Y: Yellow (yellow) K: Black (black) 7. Merge layers (down): Ctrl+E8. Link layers 1) Click before the layer small gray rectangle to link this layer with the current layer; 2) Hold down Shift and right-click on an object and select. The selected layer can be linked to the current layer. If clicked again, the link will be cancelled.

9. The channel panel is used to store colors and selections. In the Alpha channel, black represents outside the selection, white represents within the selection, and gray represents the translucent area. Example: Making a picture frame (chaos) Open a picture, create layer one\draw a rectangular selection\save the selection\deselect\go to the channel and select the saved channel\ocean ripples\return to the layer, load all Save the selection (select\load selection)\invert selection\fill with a color (or open the style panel to add a style). 10. Index color mode (index) This color mode refers to using 256 or less colors to replace thousands of colors in an image. The file size is smaller, but many colors will be lost. 11. Grayscale mode (Grayscale) There are only three colors of black, white and gray in this mode. 12. Bitmap mode (Black and White mode) There are only two colors of black and white in this mode. 13. Free transformation: Ctrl+T Transform again: Ctrl+Shift+T Copy while transforming: Ctrl+Alt+T Copy while transforming: Ctrl+Alt+Shift+T Apply transformation: 1) Enter2) Double-click within the object 3 ) Click the "Confirm" button in the option bar to cancel the transformation: 1) ESC 2) Click the "Cancel" button in the option bar 14. When scaling an object, hold down the Shift key to scale in equal proportions, and hold down the Alt key to scale according to the center point. 15. Hue and Saturation: Ctrl+U16. Alignment and Distribution: To activate the alignment function, there must be two or more link layers, and to activate the distribution function, there must be three or more link layers. 7. Lasso Tool (Lasso, Polygon, Magnetic) 1. Lasso Tool: Create some irregular selections. 2. Feather selection: Ctrl+Alt+D Example: Create a file with tearing paper effect\Find a picture and pull it over\Stroke\Draw the selection with the lasso tool\Save the selection\Deselect\Select the saved channel\Lattice\Return Picture layer\Load selection\Move tool Move, rotate\Double-click the layer to add a shadow effect 3. When using the Polygonal Lasso tool, hold down Alt to temporarily switch to the Lasso tool. 4. Paste (Ctrl+Shift+V): Paste the object in the clipboard into the current selection. Example: Fill the foreground color of the cube with a light color\Build layer one\3D transformation, draw the cube, and use the trackball tool to rotate the three sides to gray\Use the polygonal lasso tool to select a certain face, find an image, and paste it into Distort the image within the selected area you drew, and do the same for the other two sides. 5. Magnetic Lasso Tool: Mainly used to select objects with high edge contrast. 6. Through the copied layer: Copy the pixels within the selection to a new layer (consistent with the original position) 7. Through the cut layer: Cut the pixels within the selection to a new layer superior. Example: Making a photo frame Step 1: Add noise to the texture\Draw a selection in the middle, transform freely, pull to both sides (multiple times)\Ctrl+u\Wave Step 2: Create a new file and draw a rectangle from the texture canvas Select the selected area and use the move tool to move the pixels inside it to the current canvas. And copy three to form a frame\Use the Polygonal Lasso Tool to select and delete each corner\Merge layers (Ctrl+E)\Double-click the layer, open "Layer Style", and add "Bevel Emboss" Contour line (0)"\Find a picture and drag it to the current canvas, adjust its position and size\Add a shadow (after drawing the Polygonal Lasso tool, fill it with black, Gaussian blur, and reduce the opacity). 8. The Magic Wand Tool (W) selects objects based on the tolerance value. The larger the tolerance value, the larger the selection range and the less precise the selection. On the contrary, the opposite is true. 9. Crop Tool (C) Function: Crop an image to the size you need. Note: To activate the "Crop Area", the layer must be a normal layer. Resolution: It is a factor that determines image size and image quality. The higher the resolution, the more pixels per inch and the clearer the image will be. On the contrary, the opposite is true.

Image resolution unit: pixel/inch (PPi) PPi: pixelsperinch Generally, when an image needs to be printed, the resolution must not be less than 300. The best human eye observation resolution is 721 inches = 2.54cm 1 foot = 30.5cm 10. The main function of slicing and slicing selection tools: making some hyperlinks URL bar: where to enter the URL (address) mailto: abc@file:/// (path to a certain file) target: in which window to open the hyperlink_blank: in New window_self: In own window Note: If not filled in, it defaults to self Information text: When pointing to a hyperlink, the text on the status bar Alt mark: When pointing to a hyperlink, the text under the mouse. 11. The main function of the repair brush and repair tool: to modify the image. How to use the repair brush: Hold down Alt to define the sampling point first. 1. Press "["/"]" to reduce and enlarge the pen tip respectively. 12. Brush, Pencil Tool (B) Define brush: Edit\Define Brush Brush panel: F5 When using the brush tool, if you turn on the "CapsLock" key, You can turn the brush cursor into a "precision cross cursor". 13. Clone Stamp and Pattern Stamp Clone Stamp: Like the repair brush tool, modify the image; Pattern Stamp: Draw the pattern into the image. Define pattern: Edit\Define Pattern Note: When defining a pattern, it must be defined as a rectangle without feathering. Example: Drawing Line Effect Step 1: Create a pattern and create a document with a height of 3px and a width of 1px. Use the rectangle tool to draw a selection of 1px in width and 1px in height. Create a new layer and fill it with a color\cancel. Select\define the pattern Step 2: Find a picture, create a new layer\select the pattern stamp tool, select the pattern you defined from the tool options bar, and then draw. 14. Path 1. Paths are divided into open paths and closed paths 2. Path creation: pen and free pen tool 3. Path selection: The difference between direct selection and path selection tools: the direct selection tool can not only select the entire path , you can also select anchor points on the framed path; the path selection tool can only select the entire path. 4. Convert the path into a selection: 1) Ctrl+Enter 2) Right-click after selecting the path 3) Click the "Load path as selection" button in the path panel 4) Hold down Ctrl and click the path to load the selection 5) Open In the path panel, right-click on the path 5. Hide the path 1) Enter 2) Press Shift to point the path 3) Click on the blank area of ??the path 6. Under the pen tool, hold down Alt to temporarily switch to the conversion point tool , hold down the Ctrl key to temporarily switch to the direct selection tool. 7. Rasterization 8. Ctrl+F4: Close the current canvas 9. Ctrl+"["/"]": Move the current layer forward/backward Ctrl+Shift+"["/"]": Move the current layer to Front/Back Alt+"["/"]": Select the layer forward/back 10. Define Custom Shape Tool Edit\Define Custom Shape 15. History Brush Tool The history panel is used to store the steps performed ( The default saved steps are 20 steps, and up to 1000 steps can be saved.) Changes in stored steps: Edit\Presets\General Snapshot: a temporary copy of the current state of the current image, which will not be saved with the file save; history brush Tool function: restore the image in the painted area to the specified state (snapshot) 16. Eraser Tool Eraser, Background Color Eraser, Magic Eraser You can use the eraser tool to erase pixels in the ordinary layer. If you erase in the background layer, it will be erased to the background color. The Magic Eraser tool erases objects based on the tolerance value. The larger the tolerance value, the larger the erasing range and the less precise the erasing, and vice versa. Note: When you use the background color eraser and magic eraser tools to erase an image, the background layer can be automatically converted into a normal layer. 17. Gradient Tool (G) Linear, Radial, Angle, Symmetrical, Diamond Transparent Area: Control whether the transparent gradient is displayed in the canvas (when executed). /Ctrl+J: Through the copied layer Ctrl+Shift+J: Through the cut layer Example: Use the pen tool to draw the shape of the brush tip, Ctrl+Enter\ fill with white, noise (40, Gaussian, monochrome )\Motion Blur (90 degrees)\Ctrl+D\Adjust the color level to the appropriate\Move the position and adjust its size.

18. Color range selection\Color range Press Ctrl to switch between "selection range" and "image". 19. The Paint Bucket Tool (G) fills the current image with the foreground color or pattern according to the tolerance value. 20. Blur, sharpen, smear Blur: reduce the contrast between adjacent pixels of the image, that is, blur; intensity: the greater the effect, the more obvious the effect will be, otherwise, the opposite will occur. Sharpen: reduce the contrast between adjacent pixels of the image. Contrast increase: Use your fingers to simulate the effect of applying ink. 21. Dodge, burn, sponge. Dodge: increase the brightness of the image, similar to the lighting operation. Deepen: reduce the brightness of the image. Sponge: Increase or decrease the saturation of the image. Desaturation: Decrease the saturation of the image. Color: Increase the saturation of the image. 22. Click the Text Tool (T) to create a single line of text, drag it to create a paragraph text and press Ctrl+ Shift+"<"/">": You can reduce and enlarge the selected text respectively; press Alt+"Left"/"Right" direction keys to increase or decrease the character spacing of the selected text; press Alt+"Up"/ The "Down" key can change the paragraph (line) spacing of the selected text. Font installation path: 1. C:\Windows\Fonts (Windows98) 2. C:\Winnt\Fonts (2000/xp) 3. Control Panel\Fonts Note: To install fonts, just copy the font file to be installed to the above folder. Example: Ice and snow text with white background\Build layer 1\Dark text\Load the text into the selection\Merge the second layer\Ctrl+Shift+i\Lattice (8)\Ctrl+Shift+i\Add noise\Blur\Curve Adjust\Deselect\Invert\Rotate Canvas After Wind Blowing (Downward)\Ctrl+UCtrl+f: Execute the last filter (cannot adjust parameters) Ctrl+Alt+F: Execute the last filter (can Adjust parameters) Example: Burning text with black background\Build layer one\White text\Rasterized text\Transfer to canvas and let the wind blow\ripples\After the wind blows, switch back\Mode changed to "Index"\Color table\( Boldface) Note: In index mode, all commands in filters and layers will not be available; and in this mode, new layers will not be created. The role of the channel: used to store color information and selections. The channel cannot be renamed or changed. There are only three colors in the alpha channel, namely black, white, and gray. Black represents outside the selection, white within the selection, and gray represents the translucent area. . Note: Channels can be used to adjust the color cast of the image. Example: Build A1 with radial characters, type, Ctrl+D, polar coordinates (bottom)\rotate to canvas\wind blow\rotate back\polar coordinates (top)\copy to image In the layer, Ctrl+U Example: brick-shaped character typing, bevel relief, contour line, textured (brick-shaped) crystal character build A1, type\blur (2)\copy A1, then blur (2)\displacement (2 , 2)\Operation (upper A1, lower A1, "difference")\automatic color levels\reoperation (upper A1, lower A2, "soft light")\select all, copy, create layer one, paste\create Layer 2, gradient, change the layer mode to "Color"\Create layer 3, embellish with brushes. Example: Create A1 for ink pad characters, type, fill in noise, cancel selection, diffuse (brightening preferred)\Ctrl+F multiple times\further blur\color levels\build layer 1, load A1, fill in red. 23. Function of annotation and voice annotation tools: for explanation Note: must be saved in psd format to be retained permanently 24. Color gamut warning (Ctrl+Shift+Y) Color gamut warning is also called overflow, it is The selected RGB color exceeds the CMYK color and cannot be printed. The system will automatically replace it with the CMYK color closest to this RGB color. View\Color Gamut Warning 25, Eyedropper, Color Sampler, Measurement Tool Eyedropper: absorb the color in the image into the current foreground color (if in the case of color-related tools, press Alt to temporarily switch to This tool) Color Sampler: View the color values ??of the sampling points, and can set up to four sampling points. Measurement tool: W: Width H: Height A: Angle 26. Hand tool (H) When using other tools, hold down the space key to temporarily switch to this tool; double-click this tool and the object will fill the canvas show. 27. The function of the zoom tool (Z): reduce and enlarge. When reducing, press Alt to enlarge, and vice versa. When using other tools, hold down Ctrl+Space to temporarily switch to the zoom-in function of this tool, and press Ctrl+Alt+Space to temporarily switch to the zoom-out function of this tool.

Double-click this tool and the object will be displayed in actual pixels (100%) (equivalent to pressing Ctrl+Alt+0) 28. Foreground/background color Restore the default front/background: D Foreground/background switching: X 29. Quick Mask (Q) Function: Edit the selection Editing tools: brush, pencil, eraser Note: By default, the normally displayed area is within the selection! 30. Layer panel 1. Open the layer panel: F72. Layer type: normal layer, mask layer, shape layer, adjustment layer, fill layer, text layer 3. Group with the previous layer: Ctrl+G to release the group : Ctrl+shift+G or: Press Alt and click between the two layers 4. Layer mask 1). Function: control the display and hiding of the image 2). Editing tools: brush, pencil, eraser, gradient, etc. 3 ), there are only three colors in the mask, which are black, white, and gray. When editing with tools, when the foreground color is black, it means hiding, when it is white, it means showing, and when it is gray, it means translucent. 4) Note: Using a mask will only hide the image, not destroy it. 5) Press and hold the Shift key and click on the mask to pause the use of the mask. 6) The function of layer vector mask is the same as that of layer mask; editing tools: related to path. 7) Note: The layer vector mask can be converted to a layer mask (right-click\Rasterize), but the layer mask cannot be converted to a layer vector mask. 8) Opacity and fill opacity. Opacity affects all objects in the layer, but fill opacity only affects the fill color of the object and does not affect some effects added to it, such as bevel. with relief. 31. Action panel: Action: A program that records the steps of an operation and can reproduce it. Note: Not all steps can be recorded using actions. Action: F9Ctrl+Shift+U: Desaturation 32. Liquify (ctrl+Shift+X) filter \Liquify 33. Extract (Ctrl+Alt+X) Function: Mainly select objects with complex edges ! Use PS to make a simple Teacher's Day greeting card. Use PS to make a greeting card. How to make a Teacher's Day greeting card. Teacher's Day greeting card is simple and easy to make. Teacher's Day greeting card making steps. Teacher's Day greeting card making process. How to make a greeting card for teachers. Click the edit button to edit "Pink" "Universal Teacher's Day Promotional Greeting Card" Online PS 10 Teacher's Day greeting card DIY method to let children send out heart-felt creativity How to use photoshop to make Teacher's Day e-greeting card-ps tutorial-Jiuaidu.com Teacher's Day greeting card photoshop design tutorial Making Teacher's Day Thanksgiving greeting card ps tutorial Siyuan Tutorial Network The title of the flower arrangement picture is Teacher's Day greeting card number 400058877 format psd volume Teacher's Day greeting card picture ps template sharing Teacher's Day greeting card design template contains psd files and materials How to use photoshop to make Teacher's Day e-card Keywords Mobile Teacher's Day Greeting card ps layered detailed mobile Teacher's Day greeting card inner page candle heart-shaped thanksgiving father I love dad postcard Mid-Autumn Festival greeting card gift Teacher's Day greeting card d creative greeting card psd Teacher's Day greeting card cover Teacher's Day greeting card picture Teacher's Day greeting card production process flower arrangement art points What categories? What are the steps for arranging flowers? What's the look? It can be roughly divided into Eastern flower arrangement, Western flower arrangement and modern flower arrangement. Oriental flower arrangement is roughly divided into Chinese classical flower arrangement, Chinese modern flower arrangement, and Japanese ikebana (there are many schools, you can ask). Western-style flower arrangements are roughly divided into Western-style classical flower arrangements and Western-style modern flower arrangements. Generally speaking, flower arrangement shapes are roughly divided into upright/inclined scalene triangles, S-shapes, tower shapes, radial shapes, horizontal rows, L-shapes and other basic shapes. If you learn these and then use them comprehensively, you will have ever-changing flower arrangement shapes~ Generally speaking, flower arrangements Steps, conception (thinking of styling ideas), flower selection, flower material selection, flower cutting mud, arrangement of flower materials, main branch structure, focal flower arrangement, flower arrangement, leaf arrangement to cover the flower mud, watering, cleaning, done~ PS: Generally pay attention to the proportion. The first main branch should be 1.5 to 2 times the height and diameter of the flower. PS: Find the style you like on Baidu Pictures, prepare the flowers and insert them, pay attention to the proportions, practice makes perfect~ Use all hands~ Remember to give points, dear~o~