Joke Collection Website - News headlines - Personal work summary of welder technicians
Personal work summary of welder technicians
Welder Technician 1 Personal Work Summary I have been working in the factory for more than a month. When he first entered the factory, he was shocked by the earth-shaking changes in the factory. Now he is carrying out simple operations under the guidance of Master. Looking back on my journey, I was deeply touched and benefited a lot. I'm a complete novice at welding. I have never been exposed to mechanical processing and manufacturing. Although I have made full psychological preparation, I still feel powerless in the face of unfamiliar industries and working environment. However, with the help and guidance of Master and her colleagues, this feeling soon vanished.
The first lesson after being assigned to the team is "knowledge of safe production". Master asked us not to touch and operate unfamiliar equipment, and always pay attention to the wires, hanging slings and ropes on the workshop floor. Put an end to all potential safety hazards.
In order to make us familiar with our work as soon as possible, Master arranged for us to read and study books such as metal technology, mechanical foundation, mechanical drawing understanding, instructions of NC direct cutting machine, etc., to have a simple theoretical understanding of actual work and to understand various types of basic raw materials in combination with theory. For example, H-beam, channel steel, strip steel, manganese steel, etc.
After entering the actual production, whenever the production drawings are released, Master will ask us to read the drawings together, from the drawings of vehicle parts to the panel drawings of large low-flat trailers. Especially in the aspect of drawing identification of trailer frame, the drawings issued by technical department are semi-finished drawings of the whole trailer frame, in which the dimensions such as wing plate and reinforcing auxiliary plate need to be welded with the trailer frame are added. Therefore, in the actual sheet cutting process, it is necessary to restore the drawings to obtain true, reliable and accurate data. This requires us to calculate the given data accurately. To ensure this, Master sometimes goes back and forth to the technical department and the production site many times to confirm the specifications and dimensions of a net, and asks us to do many calculations with him. The master said: "Only with accurate data can we produce products that meet the standards. As the first working procedure of the whole factory, we should try our best to reduce the product error. This is responsible for the work and the product. " Master's rigorous working attitude affects us all the time.
Although we had a preliminary theoretical study and received careful guidance from Master, I still felt hard and difficult when I really entered the actual production operation.
First of all, because the installation position of the CNC direct cutting machine is different from the initial setting of the machine tool, the X axis and Y axis in the manual are opposite to the actual X axis and Y axis, which makes me unable to adjust for a long time.
Secondly, I realize that just programming and operating is not enough. For example, in the case of seven plates, in order to ensure the material supply of other plates, it is very important to improve production efficiency. When cutting, the master will add an extra knife, so that the steel plate can be heated, expanded, cut and deformed synchronously while keeping the internal stress unchanged. The original four knives for producing two plates are changed into three knives, which saves plates, gas, time and efficiency.
For another example, in the blanking process of accessories, due to the irregular graphics of accessories, it is necessary to consider how to produce more accessories on manganese plates with the same size, which involves the problem of "nesting cutting". In my opinion, it seems more difficult to master. For example, it is not surprising to cut the "rear door rotating arm". I only consider how to save the knife unilaterally, but I ignore how to save the plate. But after I came into contact with "suit cutting", I understood the depth of this knowledge.
For another example, in the process of cutting the flange of the fuel tank fender for X, we chose the method of continuous cutting, which not only reduced the preheating time of each piece, but also reduced the knife repetition of the straight section, improved the smoothness of the cutting seam, reduced the machining process of the lathe, and can be directly used for drilling, making the production in one go. Master said, "Don't underestimate the production of these accessories, thinking that this is a simple and repetitive task. You know, every cut must be carefully calculated to achieve the best effect. " The master's motto is "There is no end to learning". He gave us this sentence. He said: "This can always remind yourself to keep learning and making progress in work and life."
With the deepening of study, I will learn the basic knowledge with a more practical attitude and base myself on my own work to achieve greater development.
Summary of two welder technicians' work I attended the 20-day welder training in Jiangsu Institute of Industry and Trade Technicians from August 8 and/kloc-0 to August 20 this summer. I was deeply touched by this training, which is summarized as follows.
Before that, the profession of welder was very strange to me. Although I was born as a locksmith and majored in automobile maintenance at the university, I still felt like a mountain when I came into contact with welders. Therefore, this training made me learn a lot of knowledge, and I was lucky enough to visit Xugong Group and American Caterpillar Company, which broadened my horizons.
Through this training, I learned the operation of argon arc welding, gas shielded welding and some robot welding, and studied the defects of welders for a period of time. Using argon arc welding and gas shielded welding to practice vertical welding, horizontal welding, overhead welding, pipe welding and iron bar welding respectively, although the welding technology and techniques are still immature, it can help me better explain several welding methods in future teaching work. In addition, during the training, I had the honor to visit Xugong Group and Xuzhou Caterpillar Company, a wholly-owned subsidiary of the United States. During the visit, I came into contact with the advanced robot automatic welding in the world and the first-class welding engineers in China. These experiences have greatly improved my horizons, accumulated experience for my future teaching work, and improved my future work interest.
Through this training, I have a deeper understanding of my own shortcomings, especially in integrated teaching. As far as my own knowledge is concerned, I prefer theory to practice, which will completely change in the future. I will improve my comprehensive teaching ability and innovation ability. I will ask more experienced teachers for teaching knowledge, listen more, see more, think more and do more, and strive to contribute to the integrated teaching of the college. Through this training, I also deeply feel that the professional development has an absolute relationship with the teaching staff. An excellent teaching team, an excellent professional and technical teaching team and a high-quality teaching team determine the professional development to a certain extent. Through this training, I also feel my own gap, such as my dedication to college, students and work, and my indomitable spirit when I encounter difficulties. These are all aspects that I need to improve my own quality in the future.
Through this training, I also deeply realized that professional development needs innovation, which requires innovation in teaching methods, teaching concepts, teaching management and teaching assessment. For example, for students who are easy to exercise but not quiet in secondary vocational schools, we should impart theoretical knowledge from practice and engage in some professional competitions and other activities to make use of students' sense of competition to achieve the purpose of efficient teaching. In the future teaching process, we should pay attention to the practicality of teaching. Most students in secondary vocational schools want to learn a viable technology, but our teaching is often out of touch with actual production. The knowledge learned in school is not used much in enterprises, and it has to be retrained in enterprises In the future, we will try our best to adopt the teaching mode of letting students work directly in enterprises, so that our students will be more popular with employers.
After this training, I have a deeper understanding of my future work goals. In the future, I will combine my own specialty and specialty, get rid of my own shortcomings, learn from the technology to a higher level, adapt to the actual situation of the college in teaching methods, make a breakthrough in innovative teaching and management, be unique in the welder major of the college, and make my due contribution to the development of the welder major of the college.
Summary of the work of three welders and technicians I have been engaged in welding operation technology since I entered the factory in xxxx. 1996, under the training and examination of the municipal labor bureau, we obtained the certificate of welder for boiler and pressure vessel. Due to my hard work at ordinary times, 1996 10 was selected by the company and sent to the chemical machinery factory of Nanhua Group Company to study manual argon tungsten arc welding for four months, and obtained the certificate of argon arc welding welder in the same year. In order to improve the company's welding technology, 1997, the company recommended me to study welding technology and CO2 operation technology in Hangzhou Boiler Factory for one year. So far, I can carry out five welding operations, namely covered electrode arc welding, argon arc welding, gas welding, CO2 gas shielded welding and submerged arc welding. I have eight qualified projects in covered electrode arc welding and submerged arc welding.
In order to apply what I have learned, I began to participate in the welding work in the trial production of new products (15T and 20T steam boilers) from 1998. During the trial production, I put forward my own plan, which was recognized by the company. After the hydrostatic test, the welding qualification rate reached 100%. In the same year 10, entrusted by the company's welding laboratory, we carried out the argon arc welding forming test of the flue pipe. After our own theoretical discussion and overtime operation training, we compiled a complete set of flue pipe welding technology, which made our own contribution to the company's manufacturing products and reducing production costs, and was commended by the original factory. From 1999 to 2000, manual arc welding was replaced by CO2 gas shielded arc welding for our company's 10T and 6T finned tubes, which improved the working efficiency by 2-3 times and advanced the technology. The welding method and technology have been recognized by our company. At present, in the trial production process of 2T and 4T oil-fired boilers produced by our company, the complexity of product mechanism has brought great inconvenience to welding. I actively cooperated with the technical, technological and production departments, and personally participated in the welding of covered electrode arc welding and argon arc welding in the production and circulation of drum, and the pass rate of X-ray flaw detection of weld was 65,438+000%. The first-hand information of process parameters in the production process is also mastered, which provides a basis for writing process flow cards. In recent years, I also assisted the process department in welding process evaluation and participated in the compilation of welding process, during which I compiled the pipeline welding process in the installation of industrial boilers in the company. At the same time, according to the characteristics of our company's current product organization and my accumulated practical experience, the book "Welding Safe Operation Technology" was compiled, which was approved by the company's research institute as the welder training textbook of our company's welding laboratory, and played a certain guiding role in the safe operation technology of new welders.
In the welding of the center sill, I suggest that the V-groove in the design be changed into a U-groove, because the skeleton of the center sill is the center of load and the gathering point of bending moment and torque. Although the V-groove is easy to process and weld, it is easy to produce angular deformation after welding, but the U-groove will not, and under the same welding thickness, the metal filled in the U-groove is much smaller than that in the V-groove. At that time,
In the process of welding and installing sliding die, I learned and summarized new knowledge about welding and cutting. Because the formwork weighs 80 tons, it slides as high as 6 meters every day in inclined shaft concrete construction. When sliding, it is necessary to overcome not only its own gravity but also the strong friction force of concrete on the formwork, so the requirements for materials are very high, and new steel grades are applied in the design. Because the performance of the new steel has been greatly improved, high-quality welding materials are needed to match it to strengthen and toughen the weld. I constantly improve the weldability of new steel grades, reduce the tendency of welding cracks and simplify the welding process. According to the technicians, the welding technology of this kind of steel should be mainly developed in the direction of high efficiency and automation, and the strength and service life will be doubled without adding alloying elements. This is not only a major change in steel materials, but also a new opportunity and challenge for the development of welding technology and welding materials. Through this assignment and study, I am more obsessed with welding and cutting, because with the continuous updating of metal materials, welding technology will also develop by leaps and bounds.
As the saying goes: "No pains, no gains", after years of hard work and unremitting efforts, I have made some progress, but the branch has given me a high honor: 1990 was awarded as an advanced worker of the evaluation bureau; 1994 was awarded the "Shuang Yi" expert of the sub-bureau; 1995 was rated as an advanced individual in production safety by the sub-bureau; 1996 was rated as an advanced production worker by the sub-bureau; 1997 was rated as an advanced production worker by the sub-bureau, and was rated as a personal hero for his outstanding performance in the water-filling meritorious service competition; 1998 was rated as an advanced individual in safety and civilization by the branch office; In 2000, it was rated as an advanced individual in safety; In 2002, it was rated as a safe, civilized, advanced production team and advanced individual by the sub-bureau.
How time flies! I have been working for more than 20 years in the blink of an eye. At work, I constantly enrich my welding knowledge and related knowledge, and gradually improve my ability. From an apprentice, I gradually became a senior welder who can shoulder heavy burdens alone, and became a backbone in the construction unit, which was praised by technicians and leaders many times. Reasonable suggestions were put forward many times during the construction, which greatly promoted the efficient operation of production; Actively carry out demonstration operations of junior and intermediate welders, impart skills, improve business and professional knowledge, and help them solve technical problems in construction; Be able to report the unfavorable factors and potential safety hazards that may occur in the construction process to the leaders of the straight pipe in time to ensure that the construction is carried out under the conditions of high quality, high technology, high efficiency, safety and environmental protection. As an excellent senior engineer, I have faced the encouragement of the sub-bureau and the applause of my comrades many times. I always turn these encouragement and applause into the motivation to work again and again, because I always believe in the principle of "natural selection, survival of the fittest". Because of this, I have been constantly improving myself and perfecting myself, and I have only strengthened my belief and determination to obtain the qualification certificate of technician again and again. I am eager to further enrich my knowledge on the platform of technicians, seek reasonable improvement measures, demand myself with higher standards, meet new tasks and challenges with scientific management attitude, and try my best to show my talents and abilities.
Summary of the work of four welders and technicians In recent years, with the education of the leaders of the Transportation Bureau and the help of comrades, I have worked hard to learn professional business knowledge, and I am conscientious, down-to-earth, hard-working and conscientious in this ordinary job of electric welding. In my usual work, I earnestly and humbly learn from my master, consult experienced comrades, constantly improve my professional skills and enrich myself. Participated in professional training organized by labor and personnel departments for many times and obtained welder certificate. Because I usually work hard. So far, I can perform five welding operations: covered electrode arc welding, arc welding, argon arc welding, arc welding, submerged arc welding and carbon dioxide gas shielded welding.
I have been engaged in electric welding for 30 years, and I can overfulfil the production task every year. I can achieve civilized production and safe production in my work without any major accidents. Work hard, leave Man Qin, never arrive late and leave early, and can unite comrades to work together. Actively study business, constantly improve their professional level, and make contributions to the development of enterprises. The qualified rate of welding reaches 100%, and it has been rated as advanced production worker and labor model for many times.
In the most ordinary job of electric welder, I strive to realize my life value. I have made my due contribution to the development of China's national industry. I study my business seriously and strive to improve my professional quality. When I first joined the work, the leader arranged for me to engage in electric welding. After I accepted the task, my eyes were swollen in a few days, my hands and face were hot and swollen, and I couldn't eat anything. I can't sleep well. I tried my best, but my work is still not satisfactory. I really don't want to do this. I finally came out of the countryside and met so many troubles in a job. What bad luck. With the help of leaders and comrades, I stood up again, worked hard, took pride in being tired and took pleasure in suffering. In practice, I realized that "if a worker wants to do a good job, he must sharpen his tools first". In order to complete the task, he must have an excellent set of skills to do his job well. So I used my spare time to buy a lot of professional knowledge books and safety operation rules, studied hard and practiced hard, and summed up and explored a whole set of welding technology and the safety and protection of welding workers in practice. For example, first, I shake covered electrode from side to side, covered electrode and metal fall off. Especially in the hot summer, wearing tight clothes and masks is almost airtight. Because of fear, I held covered electrode high and saw only sparks flying. After the first covered electrode welding, nothing was left on the iron plate except the scattered small iron works. It pains me to see others welding so well. The more difficult I am, the harder I work. I constantly sum up experience and lessons, analyze the causes of problems, accumulate experience in practice and win confidence for myself. In the later work, it can be welded horizontally, vertically, horizontally and upside down. It laid a solid foundation for completing the tasks assigned by the leaders. During several large-scale equipment renovation and installation, I led everyone to complete the task brilliantly, saving money for the enterprise, and the mechanical equipment has been running well so far.
First, improve safety awareness and ensure safe production.
In decades of welding work, I put safety first, strictly abide by the safety operation rules, constantly improve safety awareness and ensure safe production. There are potential dangers in electric welding, such as smashing, bumping, stabbing and scalding. Sometimes working at high altitude is even more dangerous. If it is not properly protected, not only can the work not be completed, but it will also bring unnecessary losses, even huge losses, to itself and the enterprise. In my usual work, I have carefully summed up and accumulated experience in safety, mainly in the following aspects:
First, electric shock: Equipment that may cause electric shock during welding (or cutting) includes lighting and various motors. First of all, we should pay attention to whether the equipment, tools and power supply configuration are safe and qualified. Secondly, keep it dry and maintain it regularly.
Second, arc radiation: arc is a strong light, including visible light, ultraviolet light, infrared light and so on. Its radiation is easy to cause harm to people's eyes and skin. Therefore, you must wear a filtered glass helmet and mask at work, and put a baffle at work to avoid hurting others.
Third, smoke pollution: smoke mainly comes from parent materials and coatings that are heated, evaporated or burned. It is easy to cause respiratory organ damage or other complications. Therefore, ventilation should be ensured during welding to avoid smoke retention.
Fourth, fire and explosion: because welding uses power supply, heat source and so on. Improper protection can easily lead to fire and explosion. Therefore, in welding work, we should pay attention to prevent whether sparks and shallow slag splashed during welding and heating may cause fire or explosion. Equipped with necessary fire fighting equipment.
Because I have taken effective safety measures for decades, no matter aerial work or field welding, no matter day or night, there has been no safety accident, which has won benefits for the enterprise.
Second, love your job and do what you do.
1, love your job and do your job in a down-to-earth manner. To do a good job in welding, we must first have a high sense of responsibility and be conscientious in our work. Personal interests are subordinate to the overall interests, leadership and arrangements, so as to be a good logistics soldier and serve the enterprise well. We should strive for perfection in our work and never get tired of it. Sometimes you have to sacrifice your rest time. As long as your job requires it, you must act at once. Work is an order and there can be no conditions.
2. In ordinary jobs, we should strive to realize our own life value. I have been engaged in welding since I joined the work. It can be said that I have devoted my ideals and youth to the welding cause. I have been confused and shaken. With the help of leaders and comrades, I got to know this profession again. A person's value orientation determines a person's goal, and the stage is as big as the heart. This is where the efforts to realize the value of life lie. My values can be summed up in one sentence: stand well in every post, do everything well, and integrate what I have learned with enterprise construction. Serve the development of the enterprise, take root in one's own work, be loyal to one's own work, be a good worker who loves and respects his post, cherish one's own work, be conscientious, meticulous and loyal to one's duties. Unify personal interests with enterprise interests, think about work everywhere, proceed from enterprise interests in everything, and actively do your own job. Strive for "first-class service" and strive to realize your life value in ordinary and ordinary posts.
Third, work hard and continue to do your job well.
Looking back, although some achievements have been made, there is still a long way to go compared with the developing society. I must further study hard, delve into my business, and constantly improve my thinking and professional quality. I will learn from my old age, inject modern scientific and technological knowledge into practical work, break through the leap of welding technology and quality, and make my work reach a new level.
Personal Work Summary of Welder Technician More than five years ago, I learned about the important position of welders in society through my working experience outside. The salary of employees engaged in this work is higher than that of white-collar workers, thus seeing the broad prospects of welders in the future.
So in 20xx, after the relevant training and examination of Hubei Entrepreneurship Training School, I obtained the welder professional qualification certificate and mastered various welding methods and operating procedures. Understand the selection and storage of covered electrode, the type and use of welding equipment, the form of welding joint, the formation principle of welding seam, the selection of welding position (flat welding, vertical welding, horizontal welding and overhead welding) and welding process parameters (welding current, arc voltage, welding polarity, welding speed, etc.). ), weld layout and weldment structure, gas welding technology and cutting technology, gas welding and gas cutting of common metal materials, argon arc welding principle, welding speed, etc.
In 20xx, I entered a large machinery company in Wuhan. Because I did a lot of practical operations in Hubei Entrepreneurship Skills School, and I also deepened my operating skills in all aspects of welders, I made excellent achievements and became a technical operator of the company soon after I joined the company. After years of work, I think that as a welder technician, we should constantly innovate and popularize new welding methods, improve product quality and work efficiency for the company, reduce labor intensity, and reduce the harm of toxic smoke and dust produced by manual welding to welders.
I am a studious person in my life. Probably because of this, I was sent by the company to a machinery factory in Shenzhen in 20xx to study the welding technology and CO2 operation technology of welders for one year. So far, I can perform five welding operations: covered electrode arc welding, argon arc welding, gas welding, CO2 gas shielded welding and submerged arc welding. In order to prove my ability, I have participated in the welding work in the trial production of new products of our company many times since 20xx, and boldly put forward my own scheme. After the hydrostatic test, the welding qualification rate reached satisfactory data. Later, through my own efforts, I compiled a complete set of welding technology, which can be used as a reference for the company to manufacture products, reducing the company's production costs and bringing great benefits to the company. Soon, the company promoted me to technical director. In the company's tempering in recent years, I have been diligent and willing to work, and the welding quality is stable and excellent, which makes me feel the meaning of life. In the future, I will continue to forge ahead and innovate constantly. I will not only do my job well, but also do a good job of passing, helping and leading, give full play to my talents, make more contributions to the enterprise, further improve the welding level of the enterprise, and bring more and better benefits to the company and society.
At present, the employment prospects of welders are very broad, and talents in this field are very scarce. Therefore, I suggest that people who are interested in this job can do it, and I think it will definitely bring us good income.
Summary of the work of 6 welders and technicians I have been engaged in electric welding for more than 30 years. In my usual work, I humbly ask experienced comrades seriously, actively study my business and constantly improve my business level. By assiduously studying business and learning professional business knowledge, I am conscientious, hard-working and conscientious in this ordinary job of electric welding. Civilized production and safe production can be achieved in the work, and no major accidents have occurred. I did my best in my work and contributed to the development of the enterprise.
In these years of work, I love my job and do my job well in a down-to-earth manner. We should strive for perfection in our work at ordinary times, and have fun in hardships. Engaged in welding, gas welding, gas cutting and other work, mastered the basic principles of welding and cutting and some construction specifications of welders; Through a detailed understanding of the characteristics of welding and cutting production process, welding technology, tools and operation methods, we can deeply understand and master the safety technical measures of this type of work, strictly implement safety regulations and protective measures, and ensure safe production; At work, I can actively promote and apply new technologies, new processes, new materials and new equipment in the construction according to the requirements of construction drawings, so as to continuously improve my business ability. It has been rated as an advanced production worker of the unit for many times.
In the xx thermal power plant project undertaken by my unit, I am responsible for the welding and manufacturing of molds. This task is a very special action. Sliding die bodies are all welded and installed with large metal structures, and the welding workload is very heavy. Due to the different thickness, structure and installation conditions of weldments in welding, there are many types of welding joints, such as butt joint, T-joint, angle joint and lap joint. These joints all appear at high frequency, and the working conditions are very poor: first, the light in the mold body depends entirely on illumination, which breaks the conventional lighting conditions; Secondly, the air quality in the mold is very poor. Due to the poor air mobility and limited ventilation conditions, it is difficult to neutralize and eliminate the toxic gases and harmful dust generated in the welding and cutting process in time, and the arc radiation, high-frequency electromagnetic field, noise and rays generated in the operation process are also very harmful to the body. The most important point is that there is a danger of falling when working underground, which brings great difficulties to the operation. Through various methods, the welding task was finally successfully completed.
In the process of welding and installing sliding die, I learned and summarized new knowledge about welding and cutting. Because the mould weighs 80 tons, it has to slide up to about 6 meters every day in the construction of slip-form concrete. When sliding, it has to overcome not only its own gravity but also the strong friction between concrete and formwork, so the requirements for materials are very high, and new steel grades are applied in the design. Because the performance of the new steel has been greatly improved, high-quality welding materials are needed to match it to strengthen and toughen the weld. I constantly improve the weldability of new steel grades, reduce the tendency of welding cracks and simplify the welding process. For this kind of steel, the welding technology should mainly develop in the direction of high efficiency and automation, and the strength and service life can be doubled without increasing alloying elements. This is not only a major change in steel materials, but also a new opportunity and challenge for the development of welding technology and welding materials. Through this assignment and study, I am more obsessed with welding and cutting, because with the continuous updating of metal materials, welding technology will also develop by leaps and bounds.
The building structure of power plant is complex. In the welding of the center beam, I suggest changing the V-shaped groove in the design into a U-shaped groove, because the center beam is the skeleton of the whole die, the center of load and the gathering point of bending moment and torque. Although V-groove is easy to process and weld, it is easy to produce angular deformation after welding, but U-groove does not, and the amount of metal filled in U-groove is higher than V-groove at the same welding thickness.
In the construction of 8# mixing system in xx Power Plant, due to the lack of technical personnel and weak technical force, the leader appointed me as the head of the whole set from production to installation and debugging. After receiving the task and getting the drawings from the engineering department, I read a lot of materials overnight to analyze and read the drawings in order to budget the quantity of raw materials and the construction of the site. Early the next morning, I analyzed and studied the possible problems in construction with comrades in the engineering department. Due to thorough consideration in advance, meticulous thinking and effective construction measures, it only took 90 days from production to installation, commissioning and commissioning, and the task was completed 20 days ahead of schedule. Especially in the unit project of welding and installation, the one-time acceptance rate reached 65,438+000%, which greatly improved the production efficiency and saved money. After the successful completion of the 8# mixing station, the establishment notice of the 5# mixing station was received. At that time, it was in the hot summer, and faced with many unfavorable factors such as the hot climate in the south, high temperature roasting and heavy rainfall, the original sufficient construction period seemed a little tight. According to this series of situations, I boldly made a feasible technical construction plan, adopted the method of getting up early and greedy for the dark, reduced the construction links interrupted at noon, arranged the workload of welding and cutting as early as possible, and arranged the workload of installation as much as possible in the afternoon. Due to the proper time arrangement, there was no heatstroke in hot summer, and the construction period was not delayed. In the joint acceptance of design, supervision, Party A and other relevant departments, the task was completed in 15 days.
How time flies! I have been working for more than 30 years in the blink of an eye. In my work, I constantly enrich my welding knowledge and related knowledge, and gradually improve my ability. I gradually became an independent senior professional and technical personnel from an apprentice, and obtained a college diploma in building technology through amateur study. And through their own efforts, became a professional engineer. In the construction unit has become the backbone. Reasonable suggestions were put forward many times during the construction, which greatly promoted the efficient operation of production; At ordinary times, actively demonstrate operations to junior, middle and senior welders, impart skills, improve their business and professional knowledge, and help them solve technical problems in construction; Ensure that the construction is carried out under the conditions of high quality, high technology, high efficiency, safety and environmental protection. As an excellent professional and technical personnel, I am eager to further enrich my knowledge, hope to get a higher professional promotion, be healthy and energetic, work until I am old, learn from it, inject modern scientific and technical knowledge into practical work, demand myself with higher standards, meet new tasks and challenges with a scientific management attitude, and try my best to show my talents and abilities. Make your work to a new level. Make greater contributions to the development of the unit.
- Previous article:Make healthy friends and escort beautiful youth.
- Next article:What is Jiuquan Satellite Launch Center like?
- Related articles
- Three implementation plans for quality culture construction
- Looking for case materials of reading and writing tasks of college entrance examination English composition
- Monthly exam target language
- Summary and future plan of civil air defense work
- Slogan of quality and safety production
- Eight-character classic inspirational sentences
- Contents of hypertension day publicity activities
- Is "Lighting Up the Future" suitable for the high school entrance examination?
- Manuscript of scientific aviation knowledge
- What are some interesting names for math clubs?