Construction site fencing requirements

Construction fence setting requirements:

1. Construction fences should be set up around the construction site. Multi-story and high-rise buildings should also be equipped with safety protection facilities. Main roads in urban areas and The height of construction fences set on cityscape roads, airports, docks, and station squares shall not be less than 2.5m, and the height of construction fences set on other roads shall not be lower than 1.8m.

2. To ensure that the construction fence is strong, clean and beautiful, construction fences can be set up in stages according to the project progress at the construction site of municipal engineering projects, or uniform continuous guardrail facilities can be used in accordance with regulations. The construction department should not If construction materials, garbage and engineering residues are accumulated near the construction fence of the construction site, within the approved temporary occupation area, construction materials and mechanical equipment should be loaded and unloaded in strict accordance with the approved land use scope and nature of use. A construction fence of more than 1m should be set up around the temporary area. fencing.

3. At construction sites where conditions permit, eye-catching propaganda slogans reflecting the corporate spirit and the style of the times must be posted on the surrounding walls and the outer walls of the dormitories, and slogans and propaganda slogans must be set on the construction fences. Products shall be set up in accordance with the scope, location, quantity, specifications, content and time limit approved by the municipal administrative department.

4. It is prohibited to use construction fences on construction sites to set up outdoor advertisements. If construction fences are not set up as required at the construction site, the city management and law enforcement departments will punish them in accordance with the law and order them to correct within a time limit or stop the project. Units that fail to make changes within the time limit will , transferred to the municipal and district urban management law enforcement departments for handling.

5. Construction fences must not block traffic intersections, and construction fences must not be used to set up temporary cabins, canteens, toilets and other illegal structures on the walls. If found, they will be transferred to the relevant departments for processing. The construction general contractor The unit is uniformly responsible for the setting up and management of construction enclosures at the construction site. If construction has not yet begun, the construction unit is responsible. The construction enclosure management unit should do a good job in maintaining and cleaning the construction enclosures, keep the construction enclosures clean, and avoid graffiti. painting.

6. Construction enclosure construction standards:

(1) The construction enclosure footing is constructed with m-10 cement mortar and MU10 page brick masonry, which is used to improve the construction enclosure The windproof and stable PVC board is 2.5 meters high and 3 meters wide.

(2) The construction fence must be beautified. It is prohibited to paint company names and commercial advertisements of development projects. It is strictly prohibited to post or paint garbage advertisements.

(3) The boards of the construction enclosure should be connected smoothly and the straight lines must be on straight lines. There should be no gaps between the boards, that is, the inside of the site cannot be seen from outside the site. Construction fences along the line should be set in red, and safety reflectors should be used for nighttime alarms.

(4) Construction enclosure is a measure to isolate the construction site from the external environment, making the construction site a relatively closed space.