What's the matter with the boot pattern displayed on the phone's boot light?

What's wrong with the boot mode displayed by the mobile phone boot light? Solutions;

Make sure you really can't turn it on first. Sometimes when you can't open your cell phone, you panic and think it's broken, but it's not. In many cases, you may not be able to boot it once or even several times, because even if there is nothing wrong with the hardware, there may be something wrong with the software. Therefore, first check the power supply, battery, connection, etc. , or try to turn on the machine several times.

If you still can't turn on the machine, you can try to brush it directly without thinking about other methods. In this case, the general mobile phone can return to normal, unless there is something wrong with the hardware of the mobile phone. In this case, we must ensure that there is no very important information in the mobile phone, otherwise once there is no information in the mobile phone, it will be too late to regret it.

If it can be turned on normally after brushing, if it still can't be turned on, you need to go to the designated point for maintenance or re-select a mobile phone. Once the hardware is damaged, even if the mobile phone is repaired well, it will cost a lot of money. More often, the screen and motherboard are very expensive places.

Love my mobile phone. When it is turned on, it only shows the boot mode. What happened? Hello, press and hold the volume button+power button to turn it on when turning it off. Press the home key of the robot image (like a house), press the menu key to restore the factory settings, and then press rebootsystem now to restart. This is the unlocking/double clearing method for Android phones.

The mobile phone can't be turned on, only the startup animation is displayed. What's going on here? This is a problem with the mobile phone system. Just swipe your mobile phone. You can use Bao Bao to brush your mobile phone. The brush tool inside is stable for mobile phones. And the supported mobile phone models are also very comprehensive. You can see the brush tool in the toolbox interface.

When the phone is turned on, only the power-on icon is displayed. What's going on here? Hello:

I suggest you restart your computer. If this is still the case, it is recommended to brush it. If you can brush it yourself, you can brush it yourself. If you can't, take it to the mobile phone repair shop.

Hope to adopt

I'm happy to answer your question.

Cool 8705 only shows the boot mode, and can't boot. What happened? This is a white screen fault. Try double liquidation first. If it is not successful, the bottom of the system will be destroyed, and it is necessary to find a manufacturer to save the brick after sale.

I also use 8705 now, and now there is another version updated. As soon as it is updated, an error is displayed. What about you? Is there a similar situation?

Great god f 1 turn-on light shows a dozen. What's going on here? When the computer is turned on, you must press F 1 to enter the system normally, because the BIOS setting is incorrect but the system can start normally. To solve this problem, press F 1:

1. Press the Del key to start the machine, enter the BIOS settings, and select the first "Basic Settings", otherwise "Disabel" will make the floopy setting invalid;

2. Press the DEL key to enter the BIOS at the beginning of the boot, and press the Enter key to enter the first item to see if the "Drive A" item inside is "None". If not, press "Pgup" or "PgDn" to modify, press "ESC" to exit after modification, and select "Save &; Exit Settings "item Press Enter to exit the BIOS and restart. If not, replace the battery and reset it according to the above steps.

3. Press the F 1 key to start, mainly because the BIOS settings are inconsistent with the real hardware data, which can be divided into the following situations:

(1) Actually, there is no floppy drive or the floppy drive is broken, but there is a floppy drive in the BIOS, resulting in pressing F 1 to continue;

(2) Two hard disks and dual disks were originally set in the BIOS, but later I forgot to change the BIOS settings back to a single hard disk;

(3) The battery failure of the motherboard will also cause data loss.

What is the test mode displayed on the mobile phone? Press and hold the * key, the 3 key and the green call key at the same time, and then press the power key. Don't let go of the handshake screen before the phone is turned on! Restoring the system to factory settings will delete the personal data of drive C, which can solve serious mobile phone problems!

When using #*80# to enter engineering mode, select 0 to switch between normal mode and test mode. If you choose the test mode, a white screen will appear when you turn it off and then on: the test mode FCT passes, so you can't turn it on normally, and there is no response no matter how you press it.

The solution is: first take out the battery and put it back, then press and hold three keys (power on, 3, 6) at the same time, enter #*80# after power on, and enter 0, then switch the phone back to normal mode and exit.

OPPO mobile phone boot display POWEREDBY what's going on The reason why the phone startup interface shows Powered byAndroid is:

This is Google's request for new Android phones. The slogan "Powered by Android" (that is, "Android Power") must be displayed when the new smartphone is started, indicating that the device of the mobile phone manufacturer has been certified by Google Mobile Service.

What is English saying when the mobile phone is turned on? The phone has entered recovery mode. You can use the volume button to select the restart command, press the power button to execute, and the phone will be turned on again. If the restart is unsuccessful, it may be a system crash. Go back to recovery mode and choose something like wipe &；; Reset command, Sanqing, restart the phone. The mobile phone will be restored to the factory condition.