How to manage the work of lathes in various sections of a textile factory

Manage the work of the lathes in each section of the textile factory as follows:

1. Before starting the machine, the equipment must be comprehensively checked for abnormalities. For rotating equipment, it should be confirmed that there is no jamming. , The safety protection facilities are intact, there are no phase leakage, and other relevant conditions, and it is confirmed that no one is working on the equipment before it can be started. If an abnormality is found after starting, the cause should be checked immediately and reported in a timely manner. In an emergency, decisive measures should be taken according to relevant procedures or the vehicle should be stopped immediately.

2. Start production of panels in strict accordance with the production plan.

3. Strictly control the quality of the plates and produce according to the requirements to ensure that the specifications of the produced plates are accurate, with the diagonal error within ±3mm and the length within ±5mm.

4. Regularly check the thickness of the board surface, bottom and vertical ribs. If there is any deviation, adjust it in time.

5. Frequently check whether the air compressor is operating normally and drain water regularly.

6. Reasonably arrange temporary employment in the workshop, and coordinate various types of work in the workshop to proceed in an orderly manner.

7. Keep the area around the main machine, mold, and shaping table clean and hygienic. We must ensure safe and civilized production at the workplace, and if any hidden dangers are found (especially dangerous parts that may easily cause fire due to leakage), they should be dealt with and reported in a timely manner. Clean up debris, oil stains and materials in a timely manner to ensure that safe fire passages are unobstructed.

8. Carry out regular maintenance on all parts of the equipment; pay attention to individual production safety.

9. Encourage reasonable improvement suggestions for the work of this position; once adopted and effective, certain material rewards will be given.

10. Do all work well while ensuring safety.