How to make a trash can

How to make a handmade trash can? The following small series briefly introduces the production method of manual trash can. Users in need come to have a simple understanding!

Different materials and types of hand-made trash cans have different manufacturing methods. Bian Xiao introduced some simple methods of manual trash can.

The method for use a waste paper box as a garbage can comprise that following steps:

1. Prepare waste cartons and some beautiful gift wrapping paper, and prepare double-sided adhesive, transparent adhesive, art knife, scissors, ruler and compasses.

2. Choose a relatively flat carton, cut it into a rectangle with a length of 8 1CM and a width of 29CM, then divide the carton into six parts along the longer side, and draw lines with strokes to make the bucket body of the trash can.

3. Make a hexagonal bottom of the trash can, and the diameter of the hexagon should be the same as the inner diameter of the trash can.

4. Make the lid after the bottom of the barrel is finished. The cover needs to be hexagonal, one is the outer cover and the other is the lower cover, which is used for internal limit. The limit cover is one yard smaller than the bottom of the bucket, and the outer cover is one yard larger than the bottom of the bucket.

5. Press six equal rectangular cardboard into the groove according to the drawing line, make them fold and form, and stick the two ends of the cardboard together with adhesive tape.

6. Press the cardboard on the bottom of the barrel and fix it on the barrel.

7. Cut the gift wrapping paper and connect it with double-sided tape: 87CM long and 36CM wide. Then, put it in barrels and fix the joint or the place to be fixed with double-sided tape.

8. If you are afraid that the wrapping paper at the bottom of the barrel will be worn for a long time, you should also install a rubber gasket (or made of cardboard and double-sided tape) at the bottom of the barrel.

9. Cut off three pieces of cardboard to make the lid of the trash can. First use two small pieces of cardboard to pierce and fix them with two thin wires, then use transparent glue to fix the wires and cardboard, and then use transparent glue to fix the third cardboard, so that the cover can't see the traces of the wires. Finally, wrap it in wrapping paper.

10. Thread the manufactured cover handle into the top of the cover, separate the two iron wires and fix them with sealant. Then stick the limit cover on the cover, and the beautiful cover is finished!

How to fold the handmade trash can?

How to fold the handmade trash can? Many users can't find the folding method of manual trash can. The following small series will introduce the folding method of manual trash can. Interested users have a brief look!

Simple origami trash can tutorial, simple, interesting and easy to use. Don't throw away old newspapers and posters at home in the future. You can use the waste, fold it into such a practical dustbin, and throw it away directly after use.

1, prepare a rectangular piece of paper.

2. Fold the rectangular paper in half, and then fold it in half.

3. Then open the folding twice, and then press it at the middle folding line, and both sides of the line should be folded along the line.

4. Then open it to the first folded state. When you open it, you can see three clear creases, which are folded inward along the oblique crease, and the other side is also folded like this.

5. Reverse the direction after folding and adjust the position of some long paper marks to the inside. At this time, there is a fold in the middle.

6. Fold the positions of the four corners along the dotted line in the middle, and fold all the positions of the four corners.

7. Then fold the single-layer paper that grows below, and fold both sides like this.

8. Then open the simple trash can at the mouth below the fold and fold it up.

Hand-made trash can steps

Many users don't know how to make handmade trash cans. The following small series briefly introduces the steps of making trash cans by hand. Interested users come to add a list to find out!

1. Prepare some unnecessary A4 paper, glue and some strings.

2. Divide one side of A4 paper into three parts on average according to the requirements of the factory director, and then fold each separated paper into a note of about one centimeter.

3. After all the notes are folded, put them in meters to see how big the trash can you want to fold. If the trash can is small, a word of rice will do. If it's bigger, it's better to put it two meters and fix it.

4. Weave the paper strips up and down with paper strips to the appropriate trash can size. Then weave the upper layer in the same way.

5. After weaving to a suitable height, seal the top of the paper with a piece of paper. Such a simple trash can is woven.

The above is a simple weaving method of trash can. Although the trash can is cheap, the feeling of hand-woven is irreplaceable.