The correct use of waterborne wood paint and the skills of using waterborne wood paint.

This time, I will tell you how to use water-based wood paint correctly and how to use water-based wood paint.

Application skills of wood lacquer

1, grasp the humidity. When the ambient humidity is more than 85%, it is not suitable for construction.

Otherwise, it is easy to produce defects such as white paint film.

2. Dust removal in advance. First of all, the wood surface should be polished flat and the floating ash should be treated well. Special dusting cloth can be used for cleaning, and large areas (such as floors) can be vacuumed repeatedly.

3. Proper temperature construction. When the temperature drops below 5℃, the drying time of paint will be prolonged, and white fog or extinction will occur when the temperature is too low, which should be avoided. Avoid operating in direct sunlight or high temperature. If the temperature is too high, the paint will dry faster and pinholes or bubbles will appear. So try to avoid high temperature construction.

4. Painting procedures. In the construction of floor paint, the influence on wall latex paint should be considered. Generally, the wall is painted first, leaving the last one, and then the floor paint is painted after the construction is completed.

5. It varies from material to material. Understand the wood quality of wood. If it is hardwood (such as teak, beech and Bengal), putty and foam water should be used carefully to avoid discoloration and adhesion.

Hardwood, if you want to get the best effect, brush it directly. If it is necessary to fill the gap, it is recommended to fill it with paint and fine wood powder after mixing evenly. For ordinary wood, if transparent putty is needed for substrate treatment, the whole base should be evenly coated with a scraper, which should be thin but not thick. After drying, it should be polished evenly, and the excess transparent putty attached to the wood surface should be thoroughly polished to avoid paint disease. 6. Grab the coating. Painting should be thin but not thick, and can be carried out in thin layers and multiple channels; When doing multi-layer painting construction, each layer of painting should be carried out after the lower layer is thoroughly dried, and each layer of painting should be polished and smooth.

7, timely construction. Two-component or three-component coatings must be stirred evenly after being mixed in proportion, and then let stand for 15 minutes, so that the bubbles generated by mixing can be discharged before use. If necessary, it should be filtered before use. After the paint is mixed, it must be used up within 4 hours.

8. Pay attention to safety. The proportion and collocation of paints are different for different specific products.

Construction personnel should read the product manual. In addition, the paint is flammable, so attention should be paid to safety during construction. Maintenance of wood lacquer furniture

1. Wooden furniture should be painted with water-based wood paint for one week before it can be used normally. Maintain indoor air fluidity and moderate temperature and humidity, and ensure that the paint film on the surface of wooden furniture reaches normal hardness.

2. Every few years, it is best to repaint a layer of water-based wood paint to keep the paint film of home furniture fresh and durable.

3. Furniture painted with wood paint can withstand the high temperature of water cups, but it should not be close to heaters such as stoves and heaters, so as to avoid deformation of wood furniture caused by high-temperature baking, resulting in cracking and peeling of paint film surface.

4. The paint film on the surface of wooden furniture should always be wiped with soft gauze to reduce dust and stains, and regularly wiped with car wax polish or floor wax to make the surface paint film as bright as new.

5. If the paint film on the surface of wooden furniture is stained with stains, it should be washed immediately with low-concentration soapy water or detergent, then washed with clear water, dried, and finally wiped with car wax polish.

The above is about the use skills of waterborne wood paint and the maintenance of wood paint furniture. I hope it will help you. For more information, please pay attention to the decoration protection network.