Let's talk about how to repair the odor of the toilet.

The smell in the bathroom is mainly due to poor sealing performance, which can be divided into two types:

1, when the toilet was installed in the early days, glass glue was used. Under the corrosion of hydrogen sulfide, hydrogen chloride and other gases escaping from sewers, glass glue is easy to age in two or three years, and poor sealing performance will lead to unpleasant gas odor in sewers.

2. The joint between the toilet drain and the sewer is not well sealed, which leads to incomplete siphon, and excrement remains in the siphon, polluting the water seal and causing the odor of the toilet.

Maintenance plan:

The toilet outlet and sewer are directly sealed without glass glue. Taobao has a special yellow butter sealing flange ring for toilets, which costs nine yuan and nine packages. Just buy one and install it at the joint between the toilet outlet and the sewer. This material is self-adhesive, easy to construct, has good damping, air tightness and pressure sensitivity, and also saves glass glue.

Attachment: construction steps (old hands don't have to look at it)

1. Tear off the wrapping paper of yellow butter flange for toilet bought by Taobao and put it aside. Put on gloves, rain boots, close the water inlet valve at the back of the toilet, hold down the flushing for three seconds, and drain the water in the water tank.

2. Cut off the glue under the toilet with a utility knife or a fruit knife (unless you are an old bird, this action requires gloves, which is very troublesome to cut your hand), push the toilet up (it is more labor-saving to leave half of the glue), and wipe the bottom of the toilet with a waste rag.

3. Stick the purchased yellow butter flange ring on the toilet outlet, and then slowly put the toilet back in place. Sit on the toilet, take out your mobile phone, like it, brush WeChat and press it for a while.