Can sandblasting walls be tiled? How to construct the wall brick?

Sandblasted walls also have a good decorative effect, but if you stick tiles, you should know. Can sandblasting walls be tiled?

Can sandblasting walls be tiled? You know, sandblasting walls can still be tiled, but you have to know that sandblasting requires shoveling. This will not affect the decoration construction.

We must know about tiles. When the physical properties of ceramic tiles are relatively stable, when the temperature and humidity are not tight enough, the size of ceramic tiles will cause fragments, which will drop between the severity of ceramic tile tension.

It is necessary to soak glazed tiles with high water absorption in water first. If the tiles are wetted or packaged, the viscosity of the tiles will decrease, and the phenomenon of hollowing will occur before there is not enough water and unsaturated tiles. Humidity often leads to cracking of cement mortar, and excessive water-absorbing packaging may also exist.

If half of the stone materials should be soaked in water for more than 2 hours, then the tiles in front can be paved, and there is enough water to absorb moisture, so that they can be paved first.

How to construct wall brick

Grassroots treatment should be standardized. If the wall surface is treated once, accidentally or water deposits mud and dust, we will have an impact before packaging ensures that all debris is removed. The effect should be clean, and the key deposits will be absorbed, which will not be good.

The day before rolling, it is best to immerse the base in water, and the humidity of the wall surface is 700% fully wet, so that the mortar does not condense and can be read out after hardening. In addition, a new wall is formed on the grass-roots level, fearing that the floor will be empty.

Foundation treatment: the concrete protruding from the wall is leveled. Can sandblasting walls be laid flat and large steel molds made of concrete walls? You need to scrape the surface, wipe it with a wire brush and soak it in water. The surface of the base material is very smooth, and the following details can also be adopted: clean the dust on the surface with dust, scrape off the last group of alkaline washing spots on the board with 10% sodium hydroxide, remove water and oil, and uniformly waste water, dry, and fine cement mortar 1:? 20% 1 part by weight of clean rubber (107), the cement mortar far away from the mortar wall with broom or spray, does not show high strength until it sticks to the concrete surface.

Can sandblasting walls be tiled? After understanding, the decoration can proceed smoothly.