How to use the co-branded smart wearable watch

How to use the Hermès iPhone co-branded watch

The Hermès iPhone co-branded watch is a smart watch that can be paired with an iPhone. The following are the steps to use the watch:

1. Open the watch box and take out the watch. Install the watch strap and follow the steps in the instruction manual to start the watch.

2. Turn on the Bluetooth function on the iPhone and enable Bluetooth on the watch. The watch displays the Bluetooth icon to indicate that it is connected.

3. Operate on the watch. By sliding the watch screen, you can view time, date, weather, text messages, phone calls and other information. You can also control functions such as music playback and photo taking.

4. After successful pairing, you can use the Siri function to control the watch through voice.

5. During the pairing process, you need to download and install the APP accompanying the Hermès watch. You can perform more settings and operations in the APP, such as changing the watch display style and language, setting the alarm clock, etc.

It should be noted that the Hermès iPhone co-branded watch is a high-end watch and is relatively expensive, so you need to be careful when using it to avoid accidental damage. At the same time, since the watch uses a smaller battery inside, it needs to be charged regularly.

Nowadays, smart watches have gradually entered people's lives, but many people still don't know how to use smart watches. There are many types of smart watches now, but there is basically no big problem in using them. Differences, let’s take Sony smart watch sw3 and Samsung V700 smart watch as examples to briefly introduce how to use them.

How to use a smart watch

How to use the Sony smart watch sw3:

The Sony smart watch has an NFC chip inside, so if your phone supports the NFC function, All you have to do is hold the back of your smartwatch against the back of your phone. You'll then be prompted to download the required SonySmartConnect app and related apps to pair with your Sony smartwatch. Hold the watch close to your phone, press the OK button on the screen a few times, and you've set up your Sony smartwatch.

How to use Sony sw3 smart watch: appearance and buttons

Resistive touch screen

Use fingers, nails, stylus, etc. to click and slide, which requires a certain amount of force to be triggered, sometimes there will be no response when touched lightly.

Back key

Upper left key: short press to return to the previous menu. When on the time interface, press briefly to switch the time display mode.

Card slot

Open the soft plug of the card slot on the left side of the fuselage, push the SIM card into the card slot in the direction of the arrow, and secure it.

Power on/off menu key

Lower left button: Press and hold for 3 seconds to perform power on/off operation; short press to return to the corresponding '(clock, phone, pulse, pedometer, GPS, Settings) first-level menu or cycle through each first-level menu.

SOS one-click for help

Upper right button: Press and hold for 3 seconds to start dialing the service center.

Charging headphone interface

Connect a charger or connect a USB headset

Dial a family number with one click

Lower right button: long press 3 After a few seconds, the call will start to be made to the set number of relatives and friends.

How to use Samsung V700 smart watch:

1. On the standby page, slide the screen from right to left (or from left to right) until settings are displayed.

2. Click Settings.

3. Click on the clock.

4. Click on the clock type.

5. Swipe the screen from right to left (or from left to right) to select the clock type you want, and click to change the clock type.

How to take photos with Samsung V700 smart watch

1. Swipe the screen from right to left (or left to right) until the application is displayed.

2. Click Application.

3. Click the camera.

4. Point at the subject and touch the screen to take a photo.

The above is a brief introduction on how to use a smart watch. In fact, it is not difficult to use a smart watch. If you have a smart watch in your hand, you can easily do it by simply researching it and trying more. Almost mastered how to use it.

Instructions for use of micro-wear m2pro watch

Instructions for use of micro-wear m2pro watch are as follows:

1. Power on: press and hold the power button on the watch.

2. Date and time settings: Enter the main menu, find the "Settings" option, and then set in "Time and Date".

3. Exercise monitoring: The watch can monitor the number of steps you take, calculate the distance traveled and calories burned, making it easy to better manage your health.

4. Answer calls: After the watch is connected to the mobile phone, it can answer calls and send text messages through the watch.

5. Notification push: After the watch is connected to the mobile phone, notifications such as text messages, QQ, and WeChat from the mobile phone can be pushed to the watch.

6. Other settings: The watch also supports setting alarm clocks, timers, searching for mobile phones and other functions