How to set up a k2p router in Fiji?

A router is a hardware device that connects two or more networks and acts as a gateway between networks. It is a special intelligent network device that reads the address in each packet and then decides how to transmit it. The following is the setup method of Fiji k2p router that I sorted out, hoping to help everyone.

How to set up Fiji k2p router1i. Connect Fiji K2P router?

1, Fifi K2 wireless router has five network cable interfaces: 1 WAN interface and four LAN interfaces: LAN 1, LAN2, LAN3 and LAN 4 * * *.

2.WAN interface is connected with cat (broadband network cable); The computer can be connected to any interface of LAN 1, LAN2, LAN3 and LAN4 with a network cable.

Second, set the computer IP address.

Before setting up the Fiji K2 router to surf the Internet, you need to set the IP address as "Automatically obtain IP address" in the local connection (Ethernet) of the computer.

Third, set up Fiji K2 router to access the Internet.

1. Open the settings page.

Open a browser on your computer and display the location of the URL at the top of the browser. Enter: p.to or192.168.2.1-> and click "Experience Now".

2. Select "Internet access mode"

Here, we can see that Fiji K2 router has three options under "Internet access mode":

Broadband account

Automatic detection and tracking

Static address

Important note:

"Internet access mode" is determined by the type of broadband service handled by users. Therefore, in Fiji K2 routers of different users, the choice of "Internet access mode" is different. If the Internet Access Mode is selected incorrectly, you will not be able to access the Internet after setting. Let's teach you how to judge the "Internet access mode" of broadband at home.

Broadband account

When you open broadband service, the operator will provide you with "Internet account" and "Internet password". And when the router is not used, the computer needs to use "broadband connection" to dial, and the computer can access the Internet only after successful dialing.

Computers use broadband connections to dial up the Internet.

If your broadband meets the above description, then the "Internet access mode" in Fiji K2 router should be selected: broadband account.

Then fill in "account": online account-> fill in "password": online password-> and then-> "wireless name" and "wireless network password"->; Click "Finish".

How to set up Fifi k2p router Part 2: Basic security settings

The basic security settings of wireless routers mainly include the following aspects:

1. If the default login account and password of the router is admin, please change the default user name and password of the router immediately;

2. Please select the highest level of WPA2 encryption method for router wireless security settings;

3. Please set the password of wireless Wifi as complicated as possible. The suggestion is a mixed combination of numbers, letters and symbols, and the password length should be greater than 8 digits, such as @ 0846 &; A password with such a complex length as 15@26 is very slow to be cracked by ordinary network cards.

4. Don't tell strangers and untrustworthy people the Wifi password of the wireless router;

5. Don't reserve mobile devices (smartphones and tablets) or cross roots. Try not to connect to unfamiliar and untrusted Wifi networks after ROOT or jailbreak.

Note: This article is mainly to prevent hackers from invading your mobile device. If you install some backdoor programs and then connect your mobile device to your home Wifi network, it will be easy for hackers to steal routing information.

Second, the wireless router advanced security settings

1, turn on the Mac whitelist function.

Among many protection mechanisms of routers, the white list of Mac addresses is definitely one of the advanced security functions of routers. Most wireless routers with tens or hundreds or even thousands of dollars have the function of whitelisting mac addresses. The biggest highlight of this function is that after it is turned on, the router can be bound with the MAC address of a computer or mobile device to realize one-to-one authorized access.

After this function is turned on, only bound users can access the network, and other unbound users, even if they get the Wifi password, will be unable to access the network because they are not authorized, which can ensure the security of the router to a great extent.

2.AP isolation

After the Mac white list is turned on, how can new strange devices get wifi passwords and wander around the intranet? Although you can't get online, there may be risks. For example, hackers can monitor and route intranet information. The problem of insufficient Mac binding can be solved by turning on routing AP isolation.

With it, devices connected to the LAN are isolated and data cannot interoperate. At this time, no matter how skilled the strange equipment is, it is impossible to monitor your online data. But there are also some shortcomings, such as making LAN software basically unusable. A large number of functions, including QQ's LAN fast transmission and flying pigeon book transmission, will be abolished. At present, we are not sure whether we can use LAN games, file sharing (SMB) and other functions, but it is unlikely to do so visually.

AP isolation is a slightly advanced function, which is basically supported by traditional routes costing more than 100, but some low-priced routers may not have this function.

3. Turn on the anti-DDOS and port control functions of the router.

At present, most routers have anti-DDOS function in advanced settings. This function is not turned on by default, but this module is very important. If the route is DDOS, the whole network speed will drop sharply. Anti-DDOS is to ensure that users are not affected when routing is harmed.

Similarly, the port is also a function of the router's advanced security settings. Generally, 80 (remote access), 23(SSH) and some random ports (for testing by manufacturers) may be opened on ordinary routes, but according to the safety criteria, try not to open ports. Not long ago, a T factory did not close the test port in the stable firmware, which became a big joke in the security field.

How to set up a router safely? Combining the above router basic security settings and advanced security settings, for ordinary users, the router security can be guaranteed as high as 99.9%. For most family or individual users who have low security requirements, router security can be well guaranteed. If it is an enterprise or some places with high data security requirements, advanced security can also be achieved, ensuring that 99.9% of routers are almost absolutely safe.

How to set up a k2p router in Fiji? 3 1. Click "Wireless Settings"-"Wireless Advanced Settings" on the left to enter the wireless advanced settings interface.

2. Let's look at the transmit power, beacon slot, and turn on wmm and ap isolation. First of all, the power of this wireless router is adjustable. In general, we choose high power, so that the signal strength and transmission rate will be improved.

3. Beacon slots can be understood as the frequency at which wireless routers send beacon broadcasts. The default value of the router is 100 ms, which means that the router sends a beacon signal every 100 ms. Therefore, the higher the beacon slot value, the better the wireless network performance, and the lower the beacon slot value, the better the wireless network connection speed. No modification is recommended here.

Next, let's talk about wmm. By default, the router turns on wmm. Simply put, turning on wmm can ensure the stable connection between audio and video applications and the network.

5. About opening ap isolation. Ap isolation is very similar to virtual local area network, and is suitable for public network environment such as airports and hotels. For home users, ap isolation does not make much sense.

6. Finally, let's look at the host status. What is displayed here is the mac address, connection status and data transmission amount of the devices connected to the router.

How to set up Feifei k2p router 4 1? Any computer: change the ip address to get the IP automatically (right-click the properties of my network neighbors-right-click the local connection-double-click the Internet protocol-select Automatically get the IP address/automatically get the DNS server address! Then confirm-confirm again! )

2. Enter: 192. 168.438+0 in the browser, and then press Enter.

3. Enter user name: admin and password: admin. Pay attention to case.

4. Point Setup Wizard Next Step

5. Enter your broadband account password, and then click Next.

6. Set your wireless name and password.

7. After the point is completed, the route will automatically restart, waiting for it to restart.

8. Click LAN port settings of network parameters and select Auto Connect. Many friends have forgotten this step, and all customers will be unable to access the Internet.

9. After setting the running state, there will be data in the WAN state.

How does Feifei set up a k2p router 5 1? Before setting the mobile phone, plug in the router's power supply and plug the network cable into the router's WAN socket. At this time, if the WAN light on the router flashes, it proves that there is a signal source.

2. Next, enter the mobile phone settings-wireless network. You can see that the router has automatically created an initialized wireless network. Some Android phones need to check network notifications to see them. They can connect directly to this wireless network without a password, but they can't surf the Internet for the time being.

3. Open the mobile browser and enter 192. 168. 1 Open in the address bar (different brands of routers have different login addresses, please refer to the label or description at the bottom of the router body for details).

Then you will enter a login interface, where you need to enter the default initial user name and password of the router. Generally, the initial user name and password are admin, and some routers need to create their own passwords when they are initially set without passwords. (If not, look at the label or instructions on the bottom of the router fuselage).

4. After logging into the router, you can enter the Internet settings. After choosing the Internet access method, it is usually PPPoE or broadband dial-up Internet access (you can also choose to let the router choose automatically), then enter the broadband account number and password given to you by the network provider, and click Next.

5. The next step is to set the WiFi account and password. Remember to turn on the wireless broadcast, or you won't find this WiFi on your mobile phone. After the setting is completed, your mobile phone can connect to WiFi to surf the Internet.

Extended reading:

Selection and setting of wireless router

What kind of wireless router do you choose?

Look at the transmission rate. At present, the transmission rates of wireless routers are mainly 150M, 300M, 450M, 600M, 750M and more than Gigabit. The larger the value, the higher the transmission rate and the more expensive it is. The price of 300M products is around 100 yuan, the price of 450M products is in 200-400 yuan, and 300M products are enough for ordinary families. This is because, first of all, at present, the highest broadband access rate is only 100M, and no matter how high the router speed is, the internet access rate will not exceed the broadband rate; Secondly, the mobile phone or tablet is influenced by its own hardware, and the wireless transmission rate is mostly 54M, and the highest is not more than 150M. It is meaningless to speed up the router.

Look at the brand. Be sure to choose products of big brands, because it is its chip that really determines the performance of wireless routers. The chips selected by big brand products are of high quality and stable performance; Some famous brand products mostly use low-end chips to reduce costs. Although some parameters are high, the performance is not stable.

Look at the antenna. If it is a small and medium-sized apartment with a relatively square room type, choose a single antenna product; If the apartment is large and the room is long and narrow, choose multi-antenna products. By adjusting the antenna angle and defense line, the signal strength in a certain direction can be appropriately increased.

Where is the router?

In order to make the wireless signal cover every corner of the home, in addition to choosing the right product, the location of the wireless router is also very important. A big principle is to put it in the center as far as possible when it is close to the main use area.

WiFi signals are mainly transmitted directly, and will not detour when encountering obstacles. If they can't penetrate, they will be blocked. So, what obstacles can the WiFi signal penetrate and what obstacles can't it penetrate?

First of all, metal is impenetrable. Therefore, only wired routers can be placed in the weak box of the metal shell, and wireless routers cannot be placed. If it needs to be placed due to conditions, it is also necessary to buy products with external antennas, and punch holes in the weak boxes to expose the antennas.

Secondly, at present, the load-bearing walls of houses are mostly reinforced concrete, especially high-rise residential buildings. The steel bars in the wall are staggered into a net to form an electromagnetic shielding net, so the signal will be attenuated by more than half after passing through one bearing wall, and it is generally impossible to penetrate two bearing walls.

Third, the non-bearing wall (thickness about 10 cm) generally has little problem in penetrating two floors, and whether it can penetrate three floors depends on the specific situation.

Various ways to ensure full coverage

For ordinary families, a wireless router can basically cover wireless signals, but for some special rooms, such as villas, jump floors or long and narrow rooms, it is necessary to cover some locations.

First, wired network plus mini wireless router. This scheme is aimed at the situation that the main room has been wired, and only a small wireless router needs to be installed in the room without wireless signal coverage. At present, the mini wireless router can be the size of a cigarette case, and the plug power supply and the body are integrated, which is very compact and can be directly plugged into the socket after being connected to a wired network.

Second, power line routers and expanders. This scheme is aimed at the situation that there is no wired network in each room. The network signal is transmitted by wire through the "power cat", and the wireless signal covers the blank area through the expander. Power line network equipment needs to be purchased in sets, that is, in the form of "1+ 1" or "1+N". Generally, a power line router can drive about 10 expanders.

How to prevent network rubbing and intrusion?

After the wireless router is installed at home, it can be received whether in the room or not as long as it is within the coverage of wireless signals, so wireless security becomes very important, not only to prevent others from surfing the Internet, but also to prevent malicious intrusion and theft of personal privacy and accounts. As long as you do the following steps, wireless security will be guaranteed.

The first step is to change the default administrator password. The administrator password mentioned here refers to the password needed to log in to the router for setting. The default password is admin, which can be changed to a combination of letters, numbers and characters, about 10 digits.

Step 2, set the wireless password. On the security configuration page of wireless router, you will often see three wireless encryption methods, namely WPA-PAK/WPA2-PSK, WPA/WPA2 and WEP. We need to select the first WPA-PAK/WPA2-PSK, the authentication type and encryption algorithm are automatically selected, and the password needs to be supplemented by the combination of letters, numbers and characters around 10, so be careful not to repeat the login password.

The third step, for users with certain experience, you can turn on the MAC address filtering of wireless routers and only allow mobile phones to connect to tablet computers; You can also set the SSID hidden in the router. Only the preset mobile phone or tablet can find and access the wireless router, and outsiders can't search the router.

How to set 6 1 on Feifei k2p router? First of all, it is natural to install a wireless router. The installation process of wireless router should be very simple. We only need a network cable to combine the wireless router with the modem. There are many interfaces in the wireless router, so don't connect them in the wrong place. The interface with the modem is generally different from other colors, generally blue, and there should be a million-style logo.

2. Then there is the most important setting process. Before setting, we need to prepare a network cable to connect the computer and the wireless router, so as to enter the wireless router interface for configuration. If there is no wired connection, the router address entered in the computer will not be displayed correctly.

Then we enter the address of the router, which is usually written in the administrator's manual. The router addresses of different brands may be different, and the router addresses of different models of the same brand are also different, but most of them are commonly used router addresses, such as192.168.0.1,192.5438+068.

4. Then we click the Setup Wizard to configure the basic parameters of our surfing the Internet. By default, there are three ways to surf the Internet, PPPoE, dynamic IP and static IP. The default Internet access at home is PPPoE(ADSL Virtual Dialing). If you don't know your own internet access method, you can choose to let the router automatically choose the internet access method.

5. Then enter the basic network parameters provided by the network service provider. The connection method I use is static IP, so what I need is static IP and subnet mask. Others are optional. The configuration of other Internet access methods may be slightly different. If you forget, you can call the Internet service provider and ask them to tell you. After the input is completed, we click Next, and then we come to the wireless setting interface.

6. First of all, we need to fill in the SSID, that is, the wireless network logo, which is the medium of our wireless Internet access, so we must remember the SSID we filled in. Next, fill in the wireless password. In order to prevent surfing the Internet, a wireless password is usually set. If wireless security is not turned on, you can leave it blank. Of course, it is highly recommended to turn on wireless security.

7. Then, we click Finish to complete the setup of the wizard. Under normal circumstances, wired or wireless can access the Internet normally. Of course, if we can't surf the Internet normally, we can click on the network parameters and WAN port settings to confirm whether the WAN port connection type and dialing method are set correctly.