Why is there a bank card when Apple swipes a card?

Apple's mobile phone has turned Yangchengtong into a bank card.

Apple's mobile phone has turned Yangchengtong into a bank card.

1, because you need to add a bank card to your iPhone wallet to run Yangchengtong and recharge it. Yangchengtong is an electronic toll collection system and electronic wallet of Guangzhou public transportation, and is a related subsystem of Guangzhou Urban Traffic Intelligent System Engineering (ITS), which is issued by Guangzhou Yangchengtong Co., Ltd.

2, because iPhone and AppleWatch have not launched similar functions. The common function of "NFC access card" in China is actually to use universal access card for security encryption, which has been ignored. Copy unencrypted access card data directly. Every time you call out the savings card, you must manually switch to the bus card. The default card cannot be set as the bus card.

There is no Yangchengtong in Apple's mobile wallet. Only the Shanghai traffic card was caused by the mistake of adding Yangchengtong. The solution is: First, you need to click the+icon in the upper right corner of your wallet. Next, you need to click Scan or Add Card below, as shown in the figure. Next, you need to choose Lingnantong Yangchengtong, as shown in the figure.

4. First, open the "wallet" APP that comes with the iPhone, click "+"in the upper right corner, select "Continue" and select "Lingnantong Yangchengtong". After that, the system will enter the card opening page. If the amount to be recharged when opening a card exceeds 10 yuan, you need to pay the card opening fee 20 yuan (which can be refunded when returning the card).

Why does Apple's mobile phone always brush Shenzhen to the bank card?

Why does Apple's mobile phone always brush Shenzhen to the bank card?

I think you didn't add shenzhen tong. You can add more.

Generally speaking, shenzhen tong is not very sensitive to the induction of mobile phones. When you use it, you can pause for two seconds at the position where you swipe your card. Sometimes it may not be sensed, or it may be demagnetized. You can go to the place where you sell it or call customer service.

The mobile phone needs to be turned on to use). At present, subway stations do not accept mobile phone shenzhen tong recharge, but citizens can recharge in the air or manually at designated service outlets.

First turn on the iPhone, find and open the "wallet", as shown in the figure below. In the wallet interface, click the+icon in the upper right corner, as shown in the figure below. In the card adding interface, click and select "Scan Code or Add Card", as shown in the following figure.

There is something wrong with the mobile phone card, or the mobile phone shenzhen tong is not calibrated, but it can be calibrated in the mobile phone shenzhen tong software.

Why does my NFC pop up my bank card every time I brush the subway?

Why does my NFC pop up my bank card every time I brush the subway?

Because you added a bank card, and then it is not the first choice. The English full name of NFC is NearFieldCommunication. This is a wireless technology initiated by Philips and jointly promoted by famous manufacturers such as Nokia and Sony.

After the gate, because the mobile phone has turned on the nfc function, it has been swiping the online bank card. For Android, when nfc is turned on, it will automatically identify the system that can conduct nfc transactions. Now every city's subway network has enabled NFC payment function. If the bank card is bound, it will naturally be swiped on the bank card.

Mobile phone NFC automatically pops up. It is because of objects with frequency of 156MHZ (such as security gates, card readers, NFC-enabled mobile phones, etc.). ) is detected, so when approaching these objects, the mobile wallet will automatically pop up. Not set.

Then double-click the power button to bring up the switch behind the card swiping interface. 4. Click Close and then double-click the power button, and huaweipay will not pop up.

This is the NFC of Xiaomi mobile phone! Try clicking ┇ in the upper right corner to enter the settings, and then set one of the cards as the default card. Others can also set the time period.

When applepay brushes the subway, it shows that the bank card is limited. Please contact the bank to explain that the card has expired and needs to be processed at the bank, because it is the same as our bank card. If it has not been used for a long time after expiration, it needs to be handled in the bank.

Apple wallet was swiped as a bank card when it entered the subway.

Apple wallet was swiped as a bank card when it entered the subway.

1, this reason may be that your Apple card bag contains a transportation card and a bank card, which may make mistakes when using it. Or maybe it's because you didn't set it up properly.

2. Because the iPhone wallet needs to add a bank card to run Yangchengtong to recharge. Yangchengtong is an electronic toll collection system and electronic wallet of Guangzhou public transportation, and is a related subsystem of Guangzhou Urban Traffic Intelligent System Engineering (ITS), which is issued by Guangzhou Yangchengtong Co., Ltd.

3. Apple's mobile phone always swipes the bank card from Shenzhen, and the information on this card is rather confusing. According to the inquired information, when scanning the access card of Apple mobile phone through re-registration, it always triggers the bank card to explain the access card and the information of the bank card, which leads to confusion. You need to re-register your bank card and access card to use it normally.

4. Then stick the mobile phone on the sensor area of the gate, and you can deduct the money with the bank card or credit card bound by UnionPay flash payment. The reason is that the traffic card can be directly debited without a password, while UnionPay flash payment requires authentication to be debited.

Apple pops up the bank card by pressing the power button twice.

Apple pops up the bank card by pressing the power button twice.

In Settings -ApplePay, open and press the side key twice. Using ApplePay requires adding a bank card to the wallet program that comes with the Apple system. After the iPhone user clicks into the wallet, click the+sign at the top right of the screen, and then click "Next" to enter the application page.

Press the power button to bring up applepay. When you open the settings, you can see "press the side key twice" to open the settings of applepay, and just close it.

Apple's mobile phone is set up because of the functions of wallet and ApplePay. "Press the Home button twice" and "Pay near the card reader" will pop up when the screen is locked. Unlock Apple's mobile phone to the main page and open the setting function. Slide down in the settings menu, find the wallet, and enter the ApplePay function.

This is an Apple setting: wallet and applepay press the home button twice and payment will appear. But if you don't want to watch it, just turn it off. The closing steps are as follows: turn on the phone and find the settings. Find the wallet and applepay and click to enter.

Operation error. It is possible that you made a mistake in operation. Generally, press for about 5 seconds, open the setting wallet and press the side key twice.

Right click twice to pop up the wallet. My bank card, movie ticket and membership card are in my wallet.