How long does it take high-speed railway station to make nucleic acid? Where does high-speed railway station do nucleic acid test to see the result?

1 How long will it take for high-speed railway station to get the results? Usually, it takes about 6 hours to get the result.

Usually, nucleic acid testing is done in big hospitals. If it is not an emergency or a hospitalized patient needs a nucleic acid test certificate, the nucleic acid result is usually around 12 hours. In high-speed railway station, nucleic acid testing needs to hold high-speed rail travel information, that is, high-speed rail tickets, paper version or electronic version, and then go to the testing site for testing. The nucleic acid test for travelers will be arranged according to their urgency, and the results will be available in half an hour at the earliest. There are no special circumstances, most people are basically.

Where can I see the results of nucleic acid test in high-speed railway station? You can view the results through WeChat, Alipay and mobile phone. Taking WeChat as an example, the methods for viewing nucleic acid detection reports are as follows:

1, search for health code on mobile phone WeChat, or open WeChat, and information such as my-payment-medical health-electronic health card-my health card, personal health code, nucleic acid results, travel card and so on can be displayed.

2. If the health code is found to be green and the nucleic acid test report is negative, this information can be used to pass normally during the epidemic. Otherwise, if the yellow code, red code and nucleic acid test are positive, it may be necessary to take isolation measures to affect the travel plan.

3 Can high-speed railway station's nucleic acid test report be electronic? Of course.

Both paper and electronic versions of high-speed railway station nucleic acid test report are acceptable, and the key point is to hold a valid nucleic acid test certificate. If all localities need negative reports of nucleic acid detection within 48 hours, they must ensure that the detection time is within 48 hours when entering and leaving the station. Moreover, there are high-speed rail convenience service stations all over the country to facilitate the public to conduct nucleic acid testing at any time. When entering the station, they only need to scan the code to measure their body temperature, which is very convenient, and they don't have to worry about the loss, damage and unrecognizability of the paper version.

Remarks: Generally, tickets are purchased through online 12306, and the mobile phone client has provided real-time query function of epidemic prevention and control policies at the place of purchase and the place of arrival. After the ticket purchase is successful, a short message containing epidemic prevention policy information will be sent to the reserved mobile phone number. Please pay attention to check the SMS and know the local epidemic prevention policy in advance.

How long does it take high-speed railway station to do nucleic acid testing? It takes about half an hour to walk.

Generally, the stay time for nucleic acid testing in high-speed railway station will not be very long. Because there are many inspectors, there are also many medical staff arranged by high-speed rail in various places. For the convenience of the public, holidays are basically carried out in overtime shifts, and generally it only takes about half an hour to queue up. In addition, nucleic acid testing is different from COVID-19 vaccination. As long as it is finished, it is best to put on a mask and leave the testing site immediately to prevent the longer the infected person stays, the worse it will be for their own safety.

Another thing to note is:

1. Try to avoid eating 2 hours before nucleic acid detection.

2. Do not drink water, drink, smoke, drink or chew gum 30 minutes before sampling.

3. Reduce swallowing during physical examination, and don't clear your throat (such as expectoration and spitting).