What if Apple's SMS doesn't work?

1. What if Apple can't send a text message?

IPhone can't send SMS for fault diagnosis:

1. Confirm that the signal is normal and close the flight mode.

2. Check whether the SIM card status is normal.

3. Check whether the send key is bright and clickable.

4. If you can't click Send after entering the text, the "Send" key is still gray. Please put it in.

& gt body message

& gt turn off the display of the subject bar.

5. If you send text messages to multiple people and manually enter numbers, please make sure to use line breaks instead of spaces to separate each number.

6. If you can receive or not send short messages, you can edit the number of the short message center through internal commands after eliminating the above problems:

Set SMS center number: dial *5005*7672*+86 SMS center number # with iPhone;

Delete SMS center number: dial ##5005*7672# with iPhone.

Inquire about the set SMS center number: dial *#5005*7672# with iPhone.

When using the internal command, first use the delete command, and then set the SMS center number.

The answer is not easy, I hope I can help you, please help me adopt it if you are satisfied, thank you!

2. Why can't Apple send text messages?

Reasons for not sending SMS: network settings, sim card being cut, wrong number of information center.

Method 1: Open the settings of the mobile phone.

Turn on the switch for sending and receiving short messages again.

Method 2: Enter the restore point to restore the network settings.

Method 3: Enter the network.

Also turn on data roaming

Method 4: Turn on the dialing of the mobile phone.

Enter * 5005 * 7672 *+8613800abc500 # in the dialing interface. . Abc is the local area code (for example, Shenzhen is 755). . Press the dial key again,+is long press the 0 key.

Matters needing attention

There is also the problem of 4 s and 4s card cutting. Cardholders can cut cards in the service hall.

The answer is not easy. I wish the landlord health and hope to adopt it.

3. Why can't Apple send and receive text messages?

Why Apple 4 can't send and receive SMS:

1: The local cellular mobile network has poor signal strength and unstable connection.

2. The system network settings are wrong.

It is recommended to restore the network settings.

The operation is:

1. Click "Settings" on the main interface of the machine to open "Flight Mode".

2. Open "General" in the "Settings" interface and select "Restore":

3. Select "Restore Network Settings".

4. Why can't Apple send text messages? Is it a cell phone problem?

Apple's mobile phone text message can't be sent out, maybe there is something wrong with the SMS center.

Solution:

Method 1:

1, turn off the phone first and then plug in the SIM card;

2. Then open the dial-up keyboard interface of iPhone, take the mobile phone number as an example, enter * 5005 * 7672 *+8613800755500 #, and click the dial key;

3, according to its instructions, set the SMS center number.

Method 2:

1. According to the path of setting-phone-local number, delete the original number with 86 in the mobile phone, and then re-enter your mobile phone number.

2. Click Settings-General-Restore-Restore Keyboard Dictionary.

5.iphone can't send messages. What happened?

Hello!

1. Confirm that the signal is normal and close the flight mode.

2. Check whether the SIM card status is normal.

3. Check whether the send key is bright and clickable.

4. If you can't click Send after entering the text, the "Send" key is still gray.

5. If you send text messages to multiple people and manually enter numbers, please make sure to use line breaks instead of spaces to separate each number.

6. If you can receive or send short messages, you can edit the number of the short message center through internal commands after eliminating the above problems.

Set SMS center number: dial *5005*7672*+86 SMS center number with iPhone #.

Delete SMS center number: dial ##5005*7672# with iPhone.

Inquire about the set SMS center number: dial *#5005*7672# with iPhone.

When using the internal command, first use the delete command, and then set the SMS center number.