Operating instructions of pointer mechanical watch

1. On/Off: Press and hold the "C" key for 3 seconds to start the machine. Press and hold the "C" key for 3 seconds to turn it off.

2. One button to hide: press the "B" button to hide the screen, and then continue to receive information. You must use a special pressing method to restore the screen display. Please consult the dealer for specific operation.

3. Lock the screen: The fifth item in the menu, "Lock the screen", is the mercury switch. After opening, you can control whether the screen is displayed by shaking your wrist.

4. Automatic screen flipping setting: the fourth item in the menu, you can choose whether to automatically flip the screen to read information and when to flip the screen.

5. Bilingual: The sixth item in the menu allows you to choose the language of the operation interface.

Short message repeater: it is divided into three commands: setting, connecting, sending and information content.

(1) "Settings"-Let the all-in-one machine send a learning command to set the frequency for the terminal watch, etc. The default transmission frequency of all-in-one machine is 1 channel, and the ID is 0.

For example, if you send a "Settings" message to the SMS repeater, the all-in-one machine will issue a learning command. After the launch is completed, I will send you a text message "Set successfully".

(2) "Connect"-modify the transmission frequency of the all-in-one machine. The default transmission frequency of the all-in-one machine is channel 1 and ID 0. If you want to modify it,

Send SMS: "Connect"

The SMS responder replied: "Please set the ID code."

Send SMS: "Send+ID number" (choose between ID number 1-65535)

The SMS repeater replied, "Please set the channel number."

Send SMS: "send+channel number" (choose between channel number 1-20)

SMS transponder replies: "Connection successful"

(Modifying the frequency ID of all-in-one machine is completed. Note: Every time the power is turned off and restarted, the transponder will return to the initial state. )

(3) "Send+Information Content" If you want the all-in-one machine to send information, the short message sent to him should be preceded by a password Chinese character "Send" to filter out junk information. For example, you should send a short message "Come on, China! ! ! "Then, on the SMS transponder, edit" Come on, China! ! ! "