Apple mobile phone fingerprint settings

How does Apple reset fingerprint unlocking?

Just turn on the fingerprint identification function in the system settings and enter your own fingerprint.

How to set the fingerprint unlocking method for Apple iphone? 1. Find "Settings" on the phone desktop, and click to open "Settings". 2. Click "touchID and Password" in the "Settings" interface again.

3. Move the "iPhone Unlock" button to the right, and it will be displayed in green. Then move on to the next step.

4. Then, a prompt "Put your thumb or other finger on the home button" will appear on the desktop screen. So, put any finger on the home button to get a fingerprint.

5. Adjust the position of the finger so that a complete fingerprint can be collected in the sensing part (home button) of the mobile phone. .

How to set the fingerprint of Apple mobile phone?

1. First, click the settings icon under the main page of the mobile phone;

2. Pull down the settings page, find the touch ID and password, and click;

3. Then find and click the Add Fingerprint option;

4. The following situations will occur, just tap the home button;

5. Then put the fingerprint on the home button according to the prompt. This can only be achieved by placing the finger and removing it several times;

6. According to the prompt, you will continue to put your finger on the screen button and collect fingerprints next to it;

7. After adding the fingerprint, click Continue to return to the settings page. Fingerprint setting is complete.

How to set fingerprint unlocking for iphone7?

1. Make sure that the home button and fingers are clean and dry;

2. Enter Settings-Touch ID and Password or Touch ID and Password, and then enter your screen lock password;

3. Touch Add Fingerprint and hold iPhone as usual when touching home button.

Touch the Home button with your finger, but don't press it. Stay still until you feel a rapid vibration or the system asks you to move your finger;

5. Continue to slowly lift and then put down your fingers, and adjust the position of your fingers slightly at a time;

6. Then, the system will ask you to adjust the holding posture and input the finger edge fingerprint;

7. When unlocking the device, hold the device as usual, and then touch the home button with the peripheral part of the fingertip (instead of the central part of the first scan).

Note: 1. You need to create a screen lock password for iPhone first. The password defaults to 6 digits. Then you can set touch id2. Touch ID supports inputting fingerprints of up to 5 fingers; 3. If there is something wrong with the registered finger, please replace it.

How does Apple 6sPlus set fingerprint unlocking?

Tools to be prepared: an Apple mobile phone.

The specific operation steps are as follows:

Open "Settings" of mobile phone 1, as shown below:

2 Find "touchID and Password" and click to enter:

3 Then enter the phone power-on password to enter the page, as shown below:

4 Click the sub-item "Add Fingerprint", as shown in the following figure:

5 Then, put the finger to be recorded on the HOME button and go up and down several times until the fingerprint screen is full, as shown below:

6 After the first entry is successful, make a comprehensive record again and re-enter according to the above method, as shown in the following figure:

7 After entering, click "Continue" to save the fingerprint.

Note: 1. Before entering the fingerprint, clean the fingerprint and HOME button on your finger to ensure that the mobile phone can recognize the fingerprint normally.

2. You can only enter five fingerprints at most, and the most commonly used fingerprints can be entered repeatedly according to this step.

How does Apple 6s Plus set fingerprint unlocking?

1. First, if you skip the fingerprint setting during activation, you can click on the settings on the iPhone-Touch ID and password.

2. After opening the touch ID, select Add Fingerprint.

3. Put the middle finger on the Home button, and move your finger after you feel the vibration of the phone.

4. Repeat the operation until the fingerprints on the iPhone are all red lines. At this point, you will be prompted to enter the next step, and click Continue.

5. Place the finger edge on the home button.

6. Set such a fingerprint.

7. Next, you need to set a password to prevent the fingerprint from being unavailable or the Home key from recognizing it. At this point, you may not be able to select the number of digits of the password. You can set it first and then reselect the password style. The setting method is as follows

8. After setting the finger, you can continue to add fingerprints, and a total of five fingerprints can be added.

9. At the same time, you can also set the name of the fingerprint for better identification. If you are too lazy, just put your fingerprinted on the Home button, and the corresponding name column will be grayed out, which is convenient if you want to delete it.

How to set fingerprint lock for iphone6s?

How to set the fingerprint password:

1. First enter the iPhone6s settings, and then find and enter the TouchID and password setting options, as shown in the following figure:

2. Before entering the fingerprint identification setting, you need to enter a four-digit password, which is the previously set unlock password. Enter the fingerprint identification settings correctly, as shown in the following figure:

3. After entering the iPhone6s fingerprint identification settings, you need to select the enabled TouchID functions, including iPhone unlocking and iTunes Store and app store, where the former is fingerprint unlocking and the latter is App Store unlocking. It is recommended to check together, as shown in the figure below.

4. Next, you need to create new user fingerprint information. Fingerprint addition is very simple. Put your finger on the Home button and press it repeatedly to move it. When the red line is all over the fingerprint, you have completed the daily addition, as shown below.

5. The 5.iPhone6s can input up to 5 fingerprint information. It is recommended to input fingers such as left and right thumbs which are relatively easy to operate. In addition, in order to facilitate memory, it is suggested to name the following successfully entered fingerprints.

Why can't Apple set fingerprint unlocking?

Apple mobile phone can be unlocked by fingerprints above 5 series, but not below 5 series.

Not all Apple phones can be unlocked by fingerprints. More than 5 Apple phones can be unlocked by fingerprints, but less than 5 Apple phones can't. As for what you said, you can't unlock the fingerprint, either there is no fingerprint unlocking function or fingerprint unlocking is not set. Let me show you the specific steps of unlocking fingerprints with my iPhone6:

1. Find "Settings" on the phone desktop and click Open.

2. Drop down, find "Touch ID and Password" and click Open.

3. Click "Add Fingerprint" and enter the fingerprint according to the prompt. Now that fingerprint unlocking has been opened, I won't give you a specific demonstration to input fingerprints, which is too much trouble.

What is the reason for the wrong fingerprint setting of Apple 6?

First, there is something wrong with the fingerprint input, which leads to the inconsistency with the fingerprint stored in A7 chip, thus leading to the failure of unlocking.

1, there is something wrong with the home button and related components of iPhone6, so the fingerprint cannot be scanned correctly. 2, the fingers are sweaty or powdery, or the fingers are greasy.

This leads to scanning fingerprint error, because iPhone6 is unlocked by capacitive fingerprint, which has this disadvantage. 3, finger injury, leaving scars.

4. The unlocked finger is different from the finger you entered before. 5. Maybe the finger fingerprints are too shallow.

Second, there is something wrong with the stored fingerprint samples. 1. Whether the entered fingerprint is damaged (software or hardware may be damaged).

2. The fingerprint identification sample is not standardized when entering, and the finger is greasy or wet, which leads to the fingerprint mismatch when unlocking. Notes on entering fingerprints 1. Keep your fingers dry when entering fingerprints.

2. Enter fingerprints with both hands. 3. When unlocking, if the finger is wet, or food crumbs are stuck, or the finger is greasy, dry it with a paper towel, which can greatly improve the success rate of fingerprint unlocking.

My apple suddenly can't set the fingerprint to unlock.

The reason why Apple can't set fingerprint unlocking and its solution;

1, fingerprint IDentification (touch id) is invalid after restarting iPhone. After the iPhone restarts, fingerprint identification will be invalid. Touch ID, the fingerprint identification system of iPhone, does not store the user's fingerprint information, but digitizes the fingerprint information and stores it in the chip of iPhone. This part of the chip is protected by encryption. Only your fingerprint and password can be activated before they can be used.

Solution: So, if the fingerprint identification fails after restarting, you only need to enter your digital password once, which is also a protection mechanism.

2. When the 2.iPhone is locked for more than 48h and still not unlocked, or the user sets the Touch ID and Password in Settings.

Solution: You only need to enter the digital password once to solve it.

3.iPhone iOS system version invalidates fingerprint identification.

Solution: Upgrade to the latest version of iOS system. The new version of the system can fix many errors and defects. You can try.