How to set the gateway for wireless routing?

1. You can use this route as a switch. The specific method is: the general routing address is 192. 168. 1 or192.168.0.1(all on the back of the route).

Make sure that the wireless function on the computer is turned on, and then turn on My Network Neighborhood-Check the available network connections-Wireless network connections-Right-click properties-Find the properties of the interntr(TCP/IP) protocol point-and choose to use the following IP address. So if you don't know how to write it, you can write IP:192.168.50080.00000006066

Subnet mask: 255.255.255.0 (actually, you don't need to fill it in at all).

The default gateway192.168.1.1or192.168.0.1has different routing models, so there are differences. This is also how you said to fill in the gateway.

3. These are all set up, but remember two things: connect the network cable to the LAN port of your wireless routing, that is, the digital port, and don't connect any network cable. 2. Turn on the wireless function of the route.

No.4 1 building's answer is too unprofessional. If you don't look at the questions carefully, it can be said that there is something wrong with the routing. A broadband only needs one cat, not four. Another routing theory can connect at least more than 200 computers (IP address range from 2 to 250, but you need enough ports).

So you four computers can get one route instead of four.