How to cancel the overspeed warning of BMW x 1?

BMW speed warning can be set and cancelled on the control lever on the right side of the steering wheel. Turn to the speed alarm page. Just press and hold the one with the button under the right wiper. The multi-function steering wheel is in the setting, and the instrument shows that the vehicle speed alarm is off. The speed alarm device is a speed sound alarm system installed in the speedometer to ensure driving safety. If the vehicle speed reaches or exceeds a certain limit speed (such as 100km/h), the speed switch in the speedometer opens the buzzer circuit and gives an audible alarm.

The method is as follows:

BMW's main engine program controls vehicle speed limit and speed limiter, and intelligent chip control, with high speed limit accuracy, stable and reliable performance, and does not affect the start of large throttle. It only limits the maximum speed and speed limit of BMW 525LI, reduces the accelerator of BMW without turning off the engine, and ensures that the driver can move the accelerator pedal freely within the speed limit range.

2

1. Remote management: With the remote management function, customers can log on to the platform to inquire about the healthy use of vehicles. Data record analysis, powerful data analysis and software platform query record function, platform intelligent identification of vehicle speeding.

three

2. Automatic alarm: In case of overspeed, power failure and excessive vehicle vibration, 2B will automatically send short messages to the platform. Positioning and speed measurement: vehicle positioning, tracking and speed monitoring.

four

3. Reminder function: overspeed reminder (pre-overspeed limit reminder can be set); Vehicle maintenance reminder. Mandatory speed limit, control the maximum speed of the vehicle. (Does not affect the original vehicle power)

five

4. Regional speed limit: Different regions can reach different speed limits. Trajectory playback, you can view the historical trajectory of the vehicle on the platform, and you can choose the function of seat belt detection.