Method for connecte unmanned aerial vehicle with mobile phone

Turn on the drone, turn on the Bluetooth signal, scan the drone signal, and click.

After charging the drone, turn it on, so that the Bluetooth signal of the drone can be turned on, which is convenient for mobile phone search. Next, enter the mobile phone setting interface, click Bluetooth in the setting options to enter the Bluetooth setting interface, open the slider on the right side of the Bluetooth option, and we can turn on the Bluetooth signal of the mobile phone. After the Bluetooth function of the mobile phone is turned on, wait for the signal of the drone to be scanned in the signal below, and then click Connect Successfully.

How to take off and land drones, stay away from drones, unlock flight control, and slowly push the throttle to wait for drones to take off. This is the operation step of takeoff. Among them, the throttle must be pushed slowly, even if it has been pushed a little distance, the motor has not started yet. When landing, it is also necessary to pay attention to the operation sequence, lower the throttle, and make the plane slowly approach the ground, about 5 to 250px away from the ground. The micro-throttle will slow down the descent speed, and then lower the throttle again until the drone touches the ground and the throttle is minimized. Lock flight control. Compared with takeoff, landing is a more complicated process and needs repeated practice.