Monthly safety work summary

2021 Monthly Safety Work Summary (7 general articles)

Time is passing and never stops. A period of work is over. After the accumulation and precipitation of the past period, We have made great improvements and changes. Let’s write a work summary for this year’s work. So how is a general work summary written? The following is the 2021 monthly safety work summary I collected for everyone (7 general articles). You are welcome to read it. I hope you will like it.

Monthly safety work summary 1

Work matters:

1. In response to the spirit of the company meeting, the management system for workshop operation has been further revised and improved, especially It aims at new problems arising in production and keeps pace with the times; it further supplements the three-violation assessment system; and at the same time, it re-improves the target responsibility system.

2. Conducted a comprehensive inspection of the hidden dangers of the on-site equipment, especially the inspection and inspection of hooks and spreaders; at the same time, a comprehensive and thorough inspection of the gas sewage and alarm devices was carried out from time to time. Ensure the smooth progress of production.

3. We strengthened training and education, held lectures on professional knowledge, and further trained employees on operating procedures and emergency skills. In September, there was no production accident caused by illegal operations. and personal injury accidents, while strengthening the ideological education of employees and activating the production atmosphere.

4. Pay close attention to the implementation of labor records, shift handover records, and work ticket approvals in the production process, and report them once a day, standardizing operating behavior and improving labor efficiency.

5. 468 hidden dangers were investigated and dealt with in the whole month, and rectifications were urged in a timely manner. 212 hidden danger rectification orders were issued, with a rectification rate of 98%. Special safety inspections were conducted 4 times throughout the month to investigate and deal with hidden dangers. 108 items, the discovered hidden dangers were promptly issued with power execution instructions and rectified within a time limit. Except for some gas hidden dangers that could not be rectified due to lack of spare parts, all other hidden dangers were rectified.

6. Strengthened the assessment of the process. Throughout the month, 125 people with three violations were investigated and punished, 76 people were jointly and severally assessed, and the assessment amount totaled 6,545 yuan.

Existing problems:

1. Dual-base management is not in place, grassroots and basic work are not implemented, individual grassroots cadres do not act at work, and the three violations of workers are investigated. Covering up and interceding have seriously affected the progress of safety work.

2. Employees lack operational skills and emergency response capabilities during the production process. Once an accident occurs, they will swarm in, unorganized and targeted, time-consuming and labor-intensive, and achieve half the result with half the effort.

3. The training and education of the main unit lacks pertinence, and a lot of knowledge is flashy and fails to be combined with reality, allowing employees to combine practical operations with theoretical knowledge.

4. Some employees have little safety awareness, poor self-prevention ability and self-protection awareness, and cannot take safe and effective protective measures in time when encountering danger.

Autumn is about to end, and winter has arrived. , the "six preventions in winter" work will become the top priority of our next work. In response to the problems that arise in production in September, we will work together to prescribe the right medicine to solve the problems in time, eliminate hidden dangers, unite people, activate the atmosphere, and ensure production; Under the premise of safety, we will push the next step of work to a new level. The specific work will start from the following aspects:

1. Implement the safety production responsibility system and adhere to the mechanism of joint management , starting from the new quarter, we will pay close attention to implementation and bring an end to the "100-day Safety Production Inspection" activity. Completely eliminate people's unsafe thoughts and unsafe behaviors, and the unsafe state of things, and establish the concept of "unsafe, no production".

2. In view of the poor management of grassroots cadres and the inadequate dual-base management, the leaders of each production unit are ordered to conduct special management and training to implement the safety concept, and at the same time, increase the supervision of grassroots cadres who do not work properly. The intensity of the investigation.

3. Adhere to the "people-oriented" management, increase publicity and training efforts, effectively improve the safety awareness and safe operation skills of the majority of employees, make full use of regular meeting days, hold knowledge training, and improve employees' ability to handle emergencies. ability.

4. The training of the main unit should focus on the key points and combine theory with practice, so that employees can truly master the technical skills in production, so as to better serve production.

5. Strengthen the supervision and assessment of the "three violations" on site, and never tolerate adultery and induce major accidents.

6. Continue to promote the implementation of standardization and raise production and management to a more scientific and standardized level.

In the work in October, we will continue to uphold the safety concept of the company and branches, pay close attention to safety management as always, increase on-site supervision, strictly implement responsibilities, and ensure that safety is no small matter. Implement the concept of 'unsafe, no production' and let safety protect the smooth flow of production. Monthly safety work summary 2

1. Safety production target management situation

In February 20xx, with the joint efforts of all employees of the company, a minor ground injury accident occurred. As of February 27, safe production had been achieved for 1,614 days.

2. Safety training and education

1. From the 24th to the 26th, all employees who did not go to work during the Spring Festival were organized to conduct a resumption of work and production training and examination.

2. Daily safety training: According to the company’s training plan at the beginning of the month, a safety risk classification management and control training for safety managers was carried out this month.

3. Rectification of safety hazards

1. A total of 4 safety inspections were carried out in February (including xx Work Safety Bureau came to the mine for inspection once, xx Group Company Come to the mine for inspection once and the company conducts self-inspection twice). During the 4 hidden danger inspections, 56 safety hazards of various types were discovered (including 10 from the xx Work Safety Bureau, 4 from the xx Group Company, and 42 from the company's self-inspection). The Safety Supervision Department rectified the identified hazards according to the "hidden hazards" In accordance with the principle of "Five Certainties", we formulated a hidden danger plan, issued a hidden danger rectification notice, and organized relevant personnel to conduct acceptance according to time nodes. As of the 27th, of the 56 hidden dangers identified, 53 have been rectified, and 3 are still being rectified.

IV. Classified management and control of security risks

This month, the chairman organized the heads of various risk management departments and relevant business departments and teams to conduct annual security risk identification, and prepared the annual report in a timely manner. Safety risk identification and assessment report, establish an annual list of major safety risks, and formulate corresponding control measures. The person in charge organizes an inspection and analysis of the implementation of key safety risk management and control within the scope of responsibility every ten days, proposes measures for hierarchical safety risk management and control, and prepares a hierarchical safety risk hierarchical management and control analysis report.

5. Investigation and Punishment of "Three Violations"

1. In February, leaders and production safety management personnel at all levels investigated and punished 1 person for "three violations" and *** total fines 50 yuan.

6. Other safety production work

1. Completed on time the completion and submission of various reports required by regulatory authorities at all levels.

2. Improve safety production standardization materials as required.

3. Safety officers insist on conducting safety inspections on the 12B801 fully mechanized caving working face, key underground working sites, locations and other locations every shift, eliminating the occurrence of various safety hazards.

4. Conduct inspections on all ground positions from time to time to ensure that personnel in all ground positions stick to their posts in strict accordance with company requirements.

VII. Production safety work plan for March 20xx

1. Safety work goals in February: adhere to the policy of “safety first, prevention first, comprehensive management”, eliminate minor Accidents involving injuries or above and non-casualty accidents above level 3 to achieve safe production.

2. Strictly implement the system for leaders to lead the team, pay close attention to on-site management, and strictly combat the "three violations".

3. Strengthen the investigation and management of potential accident hazards, strengthen the investigation of potential safety hazards at the mine and underground sites, and plan to organize more than 3 major safety inspections this month. Ensure that hidden dangers are discovered and managed in a timely manner to ensure safe production in mines.

4. It is planned to organize each major to carry out a monthly on-site and data assessment of safety production standardization from March 29th to March 31st.

5. According to the company’s March 20xx training plan, carry out various safety training tasks to ensure continuous safety education for employees and continuously improve the safety technical quality of employees.

6. Supervise the ventilation and gas area to carry out one-passage, three-prevention and fire-fighting management work on the B8 fully mechanized caving working surface.

7. Supervise the fully mechanized mining area to do a good job in the safety work of adjusting the fully mechanized mining support of the B8 fully mechanized caving working face. Monthly Safety Work Summary 3

In accordance with the work arrangements of the Provincial Food Safety Committee Office, Hefei City held Food Safety Publicity Week activities from June 13 to June 20, and organized a series of food safety publicity activities , the relevant work of the Food Safety Publicity Week is summarized as follows:

1. Attach great importance and comprehensively deploy the work of the Publicity Week

The Hefei Food Safety Committee attaches great importance to the work of the Food Safety Publicity Week, and in accordance with The Provincial Food Safety Office "Forwarded the Notice of the Office of the State Council Food Safety Commission on Carrying out Food Safety Publicity Week Activities in 20xx" (Wan Food Safety Office [20xx] No. 22), and issued the "On Carrying out the Hefei City Food Safety Publicity Week 20xx in 20xx" on June 1 "Notice on Food Safety Publicity Week Activities" (Hefei Anban [20xx] No. 16), and formulated the "Implementation Plan for Food Safety Publicity Week Activities in Hefei City". The food safety offices of each county and district have also formulated publicity plans for their respective regions, and the food safety supervision departments of each city have also deployed their own publicity work. Food safety publicity work has been deployed to all industries and grassroots levels in all counties and districts.

2. Take overall action and hold the launching ceremony of the Publicity Week

Hefei City and various counties and districts have held grand launching ceremonies and concentrated publicity activities to increase the impact of the Publicity Week activities and enhance Publicity momentum. On the morning of June 13, the launching ceremony of Hefei City and Shushan District Food Safety Publicity Week was held grandly in the North Square of Carrefour Supermarket Sanli'an Store. Guo Chao, Deputy Director of Hefei Municipal People's Congress, Sheng Zhigang, Vice Chairman of the Municipal People's Political Consultative Conference and other city leaders, as well as the Municipal Health (Food and Drug) Supervision), agriculture, animal husbandry and fishery, quality supervision, industry and commerce, commerce and other member units responsible comrades and Shushan District Government responsible comrades attended the launch ceremony of the publicity week. After the launching ceremony, a concentrated publicity campaign was also carried out to vigorously publicize the Food Safety Law and other laws and regulations, basic knowledge about food and food additives, as well as the decision-making and deployment of food safety work by party committees and governments at all levels and the implementation of the department. More than ten kinds of publicity materials including the "Announcement on Strictly Crackdown on Illegal Food Additions and Strictly Regulating the Production, Operation and Use of Food Additives", a list of non-edible substances that may be illegally added to food and a list of additives prone to abuse were distributed to citizens. Feixi County, Feidong County, Changfeng County, Luyang District, Yaohai District, Shushan District, Baohe District, as well as the three development zones of Xinzhan, Hi-tech and Economic Development Zone have held launching ceremonies or centralized publicity activities, and local governments are responsible for them. Comrades, supervisory department heads, and law enforcement department personnel all participated in the propaganda. Some large-scale and reputable food safety companies have also been invited to participate in centralized publicity. Leading food companies have launched integrity initiatives to enhance the consumer confidence of the public by promoting famous and high-quality products.

3. Take multiple measures to improve the publicity effect

Hefei City uses a variety of publicity measures to go deep into the grassroots and the masses to carry out publicity, expand the breadth of publicity, and improve the publicity effect.

First, carry out publicity and consultation. The city received 1,147 on-site consultations, received 130,000 publicity and consultation personnel, and distributed 58,300 copies of publicity materials. Baohe District also innovatively printed 10,000 copies of food safety knowledge playing cards and distributed them to the masses.

The second is publicity through the media. The Municipal Food Safety Office promoted it in the food and drug special page of "Hefei Daily", and each county and district also carried out special page promotion in local media such as "Feidong News", "Luyang News", and "Yao Poster". The city publicized 101 times through radio, television, newspapers and other media.

The third is to hang banners for publicity. Food safety supervision departments actively organize food production and operation enterprises to hang food safety banners in factories and business premises; at the same time, all streets, towns, and development zones post food safety banners and slogans in prominent locations in every village in their jurisdiction to carry out food safety publicity in an all-round way. There are 477 promotional banners hung in the city. The main slogans are that food safety responsibility is more important than Mount Tai, that food is the first priority for the people, food safety is the first priority, and that the implementation of food safety laws promotes coordinated economic and social development.

The fourth is to carry out publicity in the streets and communities. Our city carried out centralized publicity in the Huaihe Road Pedestrian Street, Suzhou Road and other streets where food companies are concentrated, carried out a science popularization activity to go to the countryside in Sanshitou community, and carried out publicity into the community at Jing'an New Town Plaza in Longgang Development Zone to promote food safety. Propaganda reaches the grassroots level. The Municipal Agricultural Committee and Feixi County jointly organized a campaign to promote safe agricultural supplies to rural areas and villages. More than 10 seed, pesticide, and fertilizer production companies, including Hefei Fengle Seed Industry, China Salt Red Sifang Group, and Hefei Xingyu Chemical Industry, participated in the campaign. Activity.

The fifth is to carry out publicity in front of enterprises. The Hefei Municipal Quality Supervision Bureau, in conjunction with the Municipal Education Bureau and the Luyang District Government, launched a food safety education campaign in schools, giving a food safety knowledge lecture and publicity to teachers and students of Bojingwan Primary School in Hefei City. The health supervision departments of Luyang District, Yaohai District, and Xinzhan District joined forces with the district education committee and construction bureau to carry out publicity in schools and construction site canteens. The Municipal Quality Supervision Bureau used the form of holding a meeting on the implementation of main responsibilities of food production enterprises to carry out publicity in lieu of training. Through the food safety free SMS platform, laws and regulations, work requirements and important information on food safety supervision are promptly sent to all food certified enterprises and small workshops under supervision in the city, a total of 800 times. The Municipal Agricultural Committee held training courses and carried out publicity for the persons in charge of agricultural product production bases. The Municipal Administration for Industry and Commerce issued an "Open Letter to Food Business Operators and Food Additive Business Operators across the Province" to enterprises for publicity.

Food safety publicity is an important part of food safety work. In the future food safety supervision and rectification work, our city will, as always, carry out publicity in front of the masses and administrative counterparts, and create a good atmosphere in which the whole society cares and supports food safety. Monthly Safety Work Summary 4

1. Work Overview

It mainly organizes, arranges and manages the production of electrical appliance workshops according to the production plan, so as to complete relevant work on time and in quantity. Task.

2. This month’s work content

Complete the complete set of coordinated production, assembly, and delivery tasks for each link arranged by superiors with quality and quantity.

3. Problems this month

Since there are many control factors in each production link of the electrical appliance room, and the impact of the order market is relatively prominent, there are problems in planning and material supply. Uncertain factors make it difficult to find a fulcrum in performance management. Also, because there are too many production links and the scales of control points and assessment points are different, in order to ensure the smooth landing of performance work and the stability of the workshop, it is very difficult to scramble in time management. Adapt to the company's management requirements. In the case of urgent delivery of orders, they only deliver goods and organize production for the sake of delivery. There are no clear boundaries in the scope of authority in management. Whether it is quality assurance or the production workshop, they are always looking for any problems at work. For me, coupled with the company's other demands on management issues, I was exhausted, distracted, and felt on the verge of collapse and the limit of my abilities. I also felt that I could not bear the work pressure due to the company's urgent and urgent reform ideas.

The recent problems that need to be improved on the ia switch: except for the first hole position of the fixing screw holes of the ia five-unit tray and the panel, the remaining three holes are in the wrong position. There are no ground wire holes on the incoming side panels of lt, pc, etc. The rat-proof plate in the cable compartment of vc (especially v36) is not tight. LVC's extended door will open easily when closed (not safe enough), and the operating lever cannot be operated (the operating handle needs to be shortened by 110mm). ltThe installation size of the switch metal parts is an issue. There are many other problems with complex technical and production ancillary services that need to be resolved as soon as possible: production planning, material supply, etc.

The laser machine (the one purchased first) needs major repairs.

IV. Work experience this month

This month’s work is in a state of chaos and complexity. It is difficult to find a practical, clear and effective management method in work and study. methods, especially in terms of stabilizing the mentality of employees. There are still many improvement and trial problems in the implementation of performance management. Employee understanding and support are key.

The division of work and the delegation of authority are vague concepts for company management. As a manager, I have no time to think about how to improve the level of workshop management. I spend all day coordinating and handling various emergencies and technical problems in the workshop for the sake of delivery.

The uncertainty of orders and the random ordering method. In order to meet the market delivery time, it is necessary to control the production progress and coordinate production, resulting in very large variability in the production of electrical appliances, and the intensity of management and work The pressure has also increased.

5. Suggestions for this month

1. The training for generalists is mainly to strengthen the improvement of employees' own skills. Employees can use 15 jobs without consent. Use your time to do things that interest you personally.

2. Strengthen the step-by-step implementation of performance work

3. Establish seven standards for workers that require "comprehensive, detailed and strict": output, quality and consumption indicators; technical operation standards; accidents Control standards; equipment maintenance standards; civilized production standards; quotas for material collection and labor discipline regulations.

4. Implement work sampling to verify employees’ working hours: employee working time percentage, employee working rate; machine utilization rate

5. Strengthen the analysis of workshop positions and job responsibilities .

6. How to make a soft landing of performance management and achieve a stable production management transition in the workshop.

7. Learn and explore more effective assessment systems and methods.

8. How to manage the backbone.

9. Analysis of the positioning and job responsibilities of workshop managers.

VI. Work plan for xx months of 20xx

1. Strengthen the work analysis of workshop position management.

2. Changes in work have led to the strengthening of production planning work.

3. Improve the assessment methods of process production control points in the workshop and the management system for efficiency improvement and energy reduction.

4. Adjust and organize temporary work and emergencies within the workshop according to orders and production plans.

5. Establish a job responsibility system and an economic responsibility system to rationalize the decentralization of power.

6. Strengthen unity and cooperation with colleagues.

7. Strengthen supervision and performance identification in the implementation of the system.

8. Improve the basic data collection, summary, analysis and application of workshop processes.

9. Work hard to adjust production arrangements to achieve an order completion rate of 80%. Urgent order completion rate is 100.

10. For workshops that determine production based on sales, conduct output and quality analysis based on the production plan. Monthly Safety Work Summary 5

1. Project Overview:

The five tender sections under the jurisdiction of the Second Supervision Representative Office of Songluan Expressway belong to mountainous and hilly areas, with crisscrossing mountains and overlapping mountains. Rivers and ditches are intertwined, and the terrain is undulating. Section K97 850～K128 380 has a total length of 30.530KM, and is marked by SLTJ.6: China Railway 15th Bureau First Engineering Co., Ltd.; SLTJ.7: China Railway 15th Bureau Fifth Engineering Co., Ltd.; SLTJ.8 Bid: Shanxi Mingtai Engineering Construction Co., Ltd.; SLTJ.9 Bid: China Communications Construction Company No. 6 Engineering Co., Ltd.; SLTJ.10 Bid: Main engineering subgrade project of five construction units of China Railway 15th Bureau Group Seventh Engineering Co., Ltd. : The amount of earth and stone to be excavated is 4753800m3, and the amount of earth and stone to be filled is 2206200m3. Masonry work 162915m3, bridge engineering bridge 8305.84m/26 bridges; middle bridge 461.508m/6 bridges.

Tunnel project: left line 7203.32m/14 blocks; right line 7325m/15 blocks. Interconnection area: two locations, including 2 interconnected grade crossings and 2 separate grade crossings. Channel: ***101.76m/3 channels. Culvert: ***1425.73m/28 lanes.

2. Summary of safety management:

Last month, we conducted four inspections of the construction site according to the work plan, and cooperated with the company’s monthly inspections. During the daily inspections, two main problems were discovered on site. There were potential safety hazards in two sections (tunnel projects) of each bid section and a supervision notice was issued for immediate rectification (the distance between the left tunnel excavation and the primary branch of No. 2 Shiziping tunnel of Qibiao was large, and the pipe shed of the right tunnel of Yachigou tunnel of No. 9 bid There is a grouting problem). Check that the calibration certificates for the ten-standard special machinery and equipment have been completed, mainly for lifting equipment and mixing station equipment.

One copy of the special supervision notice was issued and a reply was issued, and one copy was sent to each bid section station. The responsibilities for improving the safety management of each station have been put in place.

At present, the on-site safety management of each bidding section is under control, and there are no safety incidents in the bidding section and the Spring Festival is spent safely. In order to maintain the current good status, it is important to tighten safety work at all times. Monthly Safety Work Summary 6

Since January, the xxx work area has formulated an annual safety work plan for 20xx based on a careful summary of the safety work in 20XX.

January is the coldest month of the year. For this month, the xxx work area has seriously carried out the following work:

1. In accordance with the paragraph on "three preventions" for winter lines "In the spirit of the notice, we carefully organized various road maintenance areas to rectify the hidden dangers of the lines, and did a good job in preventing frost heaving of the lines. Due to the cold weather, the rails are prone to large rail gaps and the splint bolts are pulled off, and timely inspections were carried out The work of adjusting the rail joints evenly was carried out; some key connecting parts were oiled and anti-freeze.

2. The working area organized technical personnel to carry out a winter line survey on the lines under its jurisdiction, and found other problems on the lines, such as serious wear and tear of large and small leather pads, imperfect crossing equipment, poor geometric dimensions of turnouts, etc. etc., also ordered the road maintenance area to make rectifications. It also cooperates with the safety inspection of the equipment in the processing section to manage the weak links of the line and ensure safe transportation.

3. Strengthen the management of road patrol workers, require road patrol workers to perform their duties well, strengthen inspections of routes, and not be absent from work or leave their posts without authorization due to cold weather. While requiring them to make minor repairs to minor problems discovered during the inspection, they must also implement the handover system and reporting system, and report major hidden dangers discovered in a timely manner so that dangers can be resolved as soon as possible. deal with.

Fourth, strengthen the safety ideological education of employees and improve their safety awareness. The xxx work area takes the investigation and assistance of "11 types of hidden dangers" as the starting point, visits and condolences to employees in need, and provides help to the best of our ability to eliminate their worries; for individual road patrol workers such as divorced employees and motorcyclists in their spare time, we also conduct separate inspections For ideological education, they are required to correctly handle family conflicts, correctly handle the relationship between work and side jobs, and not to go to work with emotions or fatigue. The work area also issued safety reminder cards to employees at the front line to remind employees to ensure safe production.

5. Provide training to employees and continuously improve their independent security capabilities. In January, Lieshan also strengthened business knowledge training and safety knowledge training for employees in view of the fact that there are fewer line maintenance tasks in winter, so as to improve employees' independent security capabilities. In addition, the majority of employees were organized to participate in the safety knowledge front-line activities held in Duan. By participating in various safety cultural and artistic activities, the employees' safety knowledge has been further improved.

Safety work arrangements for February:

1. Do a good job on duty during the Spring Festival to ensure the safety of the Spring Festival.

2. Continue to increase the management of road patrol workers and strengthen the inspection of lines during the Spring Festival holiday.

3. Coordinate with all parties, establish and improve the early warning mechanism, and establish a rescue commando team composed of the backbone of each road maintenance area to respond to various emergencies.

Fourth, strengthen logistics management, focusing on improving fire protection facilities in key departments such as warehouses and tool rooms to ensure fire safety; strengthen comprehensive management of social security to prevent the occurrence of various security incidents. Monthly Safety Work Summary 7

In order to further strengthen the basic safety management and comprehensively improve the safety management level, according to the company's arrangements, we will continue to deepen the "Three Preventions in Winter" activities, combined with the actual work of the department, and based on the current situation , carried out special inspection activities such as safety management, "implementation of five-level safety management responsibilities", winter safety construction, special fire inspections, prevention and control of water, civil explosives, "one supply and three defenses", mechanical and electrical management, monitoring and control, quality standardization management, etc. Safe production has been successfully achieved. The specific situation of safety work this month is now reported as follows:

1. Do a good job in all aspects of mining construction projects

In order to better do a good job in the mine construction For various construction projects, the headquarters organizes various safety inspection activities in a timely manner and conducts comprehensive inspections both underground and above the mine every day. In January, special inspections were conducted on the storage, transportation and use of gunpowder many times. The department actively urged the project department to make rectifications for the identified hidden dangers and problems.

2. Continue to carry out the "Five-Level Safety Management Responsibility Implementation" assessment activities

In accordance with the "Five-Level Safety Management Responsibility Implementation" implementation plan, implementation details, implementation system, safety Responsibility system, etc., inspect, assess and rank the implementation of the "five-level safety management responsibility implementation" of each construction unit and supervision unit in January, and impose financial penalties on units ranked lower. Among them, the focus is on inspections of new construction units entering the site, requiring them to sign safety management agreements in accordance with regulations and carry out various construction tasks in strict accordance with the "five-level safety management responsibility implementation" system.

3. Organize and hold safety office meetings, as well as hidden danger inspections, "one supply and three preventions", special meetings on water prevention and control, and special inspections of pyrotechnics

In order to ensure the safety of various projects during the Spring Festival In response to the progress of the project, the ministry organized a major safety inspection before the Spring Festival on January 17 to ensure safe construction.

This month, each group and department conducted special inspections on each construction unit, including "roof management", "one passage and three preventions", special inspections for water prevention and control, and mechanical and electrical transportation inspections. The problems discovered have been issued A rectification notice is issued and requires rectification measures to be implemented within a time limit.

Special inspections of pyrotechnics were organized twice this month, and any problems discovered were notified in a timely manner and ordered to make timely rectifications.

On December 31, all construction and supervision units were organized to hold a tripartite December safety office meeting. At the meeting, the safety management assessment and penalties in December were reported. Each professional group made requirements for each construction and supervision unit on the hidden dangers and problems discovered during daily inspections, and made specific arrangements for the next step. The leaders of the headquarters conveyed the spirit of the headquarters safety office meeting and made specific arrangements for the development of various tasks of the headquarters.

IV. Carry out safety inspections and hidden danger investigation activities

According to the unified arrangement of the department, the department organized three major safety inspections and daily safety inspection activities this month. , 238 problems and hidden dangers were found on the ground (most of them did not submit the "Three Fixed Forms"). Among them, there are 59 underground hazards, 11 of which have not been rectified (the rectification deadline has not yet expired); 59 hidden dangers on the surface have all been rectified.

Arrange special personnel to conduct on-site surveillance of ground construction units every day, promptly discover potential safety hazards and quality problems in construction operations, promptly correct and rectify hidden dangers and "three violations" on-site, and give full play to The on-site management role of monitoring personnel is to prevent accidents and hidden dangers during construction operations.

This month, each professional group (section) will have "five-level safety responsibilities" for those who are unable to rectify hidden dangers in a timely manner, do not actively cooperate with the work of the department, have "three violations" at the construction site, and cannot complete the project progress according to the node date. Construction and supervision units ranked lower in the "Implementation" assessment were financially punished, with a total fine of 35,500 yuan.

This month, leaders of the headquarters conducted 46 mine safety inspections and conducted on-site safety inspections 61 times. General management personnel went down to mines for safety inspections a total of 1,122 times and on-site safety inspections a total of 273 times.

5. Actively carry out the "Three Precautions in Winter" inspection activities

In order to strengthen leadership and on-site supervision, the "Three Precautions in Winter" work leading group and office organized inspections of various construction and supervision units A special inspection activity of "Three Precautions in Winter" was carried out, and the hidden dangers and problems discovered were issued "Three Decisions" notices for rectification within a time limit to ensure the smooth progress of winter construction.

6. Labor employment, employee safety training and employment with certificates

All project department personnel have signed labor employment agreements, and 565 people have participated in safety training and obtained underground operation certificates. Qualification certificates, 243 people have obtained special work operation certificates, which basically meet the current needs of underground operations. At present, due to the large turnover of personnel and the arrival of some construction personnel, the department will supervise the safety training of new personnel and the timely signing of labor contracts and work-related injury insurance contracts to ensure that personnel can work safely.

7. Construction of quality standardization of ground infrastructure

This month, the department organized a comprehensive inspection of the construction of quality standardization of infrastructure of various ground construction units. Each construction unit carried out the "three treasures" of infrastructure construction. Works such as "Four Ports and Five Edges" have been strengthened. In particular, the edges of the foundation pit on site have been protected. Safety warning signs have been hung at the construction site. Scaffolding and safety nets have been erected around the main body of the project under construction. Safety operating procedures for equipment hanging, on-site material stacking in batches and categories, safety inspection of construction vehicles and environmental optimization of the construction site, winter construction operations on site of each construction unit, certification of welding personnel, lifting equipment, The safety belts for high-altitude workers, the wearing of safety helmets for construction workers at construction sites, the protection of temporary power users on site, and the electricity usage specifications were comprehensively inspected to ensure that projects under construction can complete construction tasks with quality and quantity while ensuring safety. , laying a solid foundation for coal mine construction.

8. Organizational learning

Use your spare time to organize all the staff of the department to study various documents, professional knowledge, etc., to fundamentally improve the overall quality of the mine construction management personnel, and prepare for the future Carry out work better and lay a solid theoretical foundation. ;