006390 Start sending SMS.

0 0x0000 job completed.

1 0x000 1 error function.

2 0x0002 The system cannot find the specified file.

3 0x0003 The system cannot find the specified path.

4 0x0004 The system cannot open the file.

5 0x0005 Access denied.

6 0x0006 Invalid code.

7 0x0007 The bank control block has been corrupted.

8 0x0008 There is not enough storage space to process this command.

9 0x0009 The address of the storage control block is invalid.

10 0x000a environment is incorrect.

1 1 0x000b tried to load a malformed program.

Error in 12 0x000c access code.

13 0x000d data error.

14 0x000e does not have enough storage space to complete this operation.

15 0x000f The system cannot find the specified drive.

16 0x00 10 cannot delete the directory.

17 0x00 1 1 The system cannot move files to other drives.

18 0x00 12 has no file.

19 0x00 13 storage media is write-protected.

20 0x00 14 system cannot find the specified device.

2 1 0x00 15 device is not ready.

22 0x00 16 device cannot recognize this instruction.

23 0x00 17 data error (cyclic redundancy check)

24 0x00 18 program issued a long error instruction.

The 25 0x00 19 drive cannot find a fixed sector or track on the disk.

26 0x00 1a cannot access the specified disk or floppy disk.

27 0x00 1b drive cannot find the required volume.

28 0x00 1c printer has no paper.

29 0x00 1d system cannot write data to the specified drive.

30 0x00 1e system cannot read the specified device.

3 1 0x00 1f The equipment connected to the system does not work.

32 0x0020 This process cannot access this file because it is being used by another process.

Part of the file 33 0x002 1 is locked and cannot be accessed now.

The floppy disk of drive 34 0x0022 is incorrect. Please insert %2 (volume serial number: %3) into drive% 1.

36 0x0024 There are too many open shared files.

38 0x0026 has reached the end of the file.

39 0x0027 Disk is full.

50 0x0032 This network request is not supported.

5 1 0x0033 The remote computer cannot be used.

52 0x0034 Duplicate network name.

53 0x0035 The network path cannot be found.

54 0x0036 The network is busy.

55 0x0037 The specified network resource or device is no longer available.

56 0x0038 The network bios command limit has been reached.

57 0x0039 There is something wrong with the network adapter.

The server specified by 58 0x003a cannot perform the requested operation.

An unexpected error occurred in the 59 0x003b network.

The 60 0x003c remote adapter is not compatible.

6 1 0x003d printer queue is full.

The space of the 62 0x003e server cannot store the files waiting to be printed.

63 0x003f The file waiting to be printed has been deleted.

64 0x0040 The specified network name cannot be used.

65 0x004 1 Access to the network is denied.

66 0x0042 The network resource type is wrong.

67 0x0043 The network name cannot be found.

68 0x0044 exceeds the name limit of LAN adapter.

69 0x0045 exceeds the limit of network bios session.

70 0x0046 The remote server is paused or starting.

7 1 0x0047 cannot connect to this remote computer at this time because the number of connections has reached the maximum.

72 0x0048 The specified printer or disk device has been paused.

80 0x0050 file already exists.

82 0x0052 Unable to create directory or file.

83 0x0053 int 24 failed

84 0x0054 The storage used to process this request cannot be used.

85 0x0055 The name of the near-end device has already been used.

86 0x0056 The specified network password is incorrect.

87 0x0057 parameter error.

88 0x0058 A data write error occurred in the network.

89 0x0059 The system cannot perform other trips at this time.

100 0x0064 Unable to create other system signals.

10 1 0x0065 belongs to the semaphore dedicated to other trips.

102 0x0066 semaphore has been set and cannot be closed.

103 0x0067 Unable to specify semaphore.

104 0x0068 Unable to request a dedicated semaphore during the interrupt.

105 0x0069 The previous ownership of this semaphore has ended.

106 0x006a Please insert the floppy disk into% 1.

107 0x006b The program stopped because the replacement disk was not inserted.

108 0x006c disk is in use or locked.

109 0x006d pipeline has been aborted.

1 10 0x006e The system cannot open the specified device or file.

The file name of 65438+110x006f is too long.

1 12 0x0070 Insufficient disk space.

1 13 0x007 1 No internal file identifier is available.

1 14 0x0072 The target internal file identifier is incorrect.

1 17 0x0075 The ioctl call issued by the application is incorrect.

1 18 0x0076 The value of the write verification parameter is incorrect.

1 19 0x0077 The requested command is not supported by the system.

120 0x0078 This function is only valid in win32 mode.

12 1 0x0079 semaphore exceeded the timeout period.

122 0x007a The data area passed to the system call is too small.

123 0x007b file name, directory name or storage label syntax error.

124 0x007c system call hierarchy is incorrect.

125 0x007d disk is not marked.

126 0x007e cannot find the specified module.

127 0x007f cannot find the specified program.

128 0x0080 has no waiting sub-trip.

129 0x0081%1This application cannot run in win32 mode.

130 0x0082 attempted to use the file handle of the open disk partition.

Operations other than original disk I/O.

13 1 0x0083 tried to move the file pointer before the beginning of the file.

132 0x0084 Unable to set the file pointer on the specified device or file.

133 0x0085 join or subst command cannot be used for previously bound disk drives.

134 0x0086 Try to use the join or subst command on a combined disk drive.

135 0x0087 Try to use the join or subst command on the replaced disk drive.

136 0x0088 The system tried to delete the link relationship of the unlinked drive.

137 0x0089 The system tried to delete the replacement relationship of the unreplaced drive.

138 0x008a The system tried to add the drive to the directory where the drive has been added.

139 0x008b The system tried to replace the drive with the directory of the replaced drive.

140 0x008c system tried to replace the drive with the directory of the replaced drive.

14 1 0x008d The system tried to replace the drive with a combined drive directory.

142 0x008e system cannot perform join or subst at this time.

143 0x008f system cannot merge drives or replace directories under the same drive.

144 0x0090 This directory is not a subdirectory of the root directory.

There is still data in the 145 0x009 1 directory.

The path specified by 146 0x0092 has been replaced.

147 0x0093 Insufficient resources to process this instruction.

The path specified by 148 0x0094 cannot be used at this time.

149 0x0095 The drive directory you are trying to merge or replace is the target that has already been replaced.

150 0x0096 config.sys file did not specify system tracking information, or the tracking function was cancelled.

15 1 0x0097 The number of semaphore events specified is incorrect.

152 0x0098 dosmuxsemwait not executed; Too many semaphores are set.

153 0x0099 dosmuxsemwait list is incorrect.

154 0x009a The storage medium symbol length limit you entered.

155 0x009b Unable to create another thread.

156 0x009c receives the trip rejection signal.

157 0x009d has been discarded and cannot be locked.

158 0x009e sector has been unlocked.

The address of 159 0x009f thread ID is incorrect.

160 0x00a0 passed to dosexecpgm with quotation marks is incorrect.

16 1 0x00a 1 The specified path is incorrect.

162 0x00a2 signal waiting to be processed.

164 0x00a4 system failed to create thread.

167 0x00a7 failed to lock some files.

The resource requested by 170 0x00aa is in use.

173 0x 0ad The locking requirement of the cancellation range is not obvious.

174 0x00ae file system does not support automatic change of lock type.

180 0x00b4 system found an incorrect section number.

182 0x00b6 The operating system cannot execute% 1.

The file 183 0x00b7 already exists. Cannot create the same file.

The flag sent by 186 0x00ba is wrong.

The system flag specified by 187 0x00bb cannot be found.

The operating system of 188 0x00bc cannot execute% 1.

189 0x00bd operating system cannot execute% 1.

The operating system of 190 0x00be cannot execute% 1.

19 1 0x00bf cannot execute% 1 in win32 mode.

The operating system of 192 0x00c0 cannot execute% 1.

193 0x00c1%1is not a correct win32 application.

The operating system of 194 0x00c2 cannot execute% 1.

The operating system of 195 0x00c3 cannot execute% 1.

196 0x00c4 operating system cannot run this application.

The 197 0x00c5 operating system cannot run this application at present.

The operating system of 198 0x00c6 cannot execute% 1.

199 0x00c7 operating system cannot run this application.

200 0x00c8 code segment cannot be greater than or equal to 64kb.

20 1 0x00c9 operating system cannot execute% 1.

202 0x00ca operating system cannot execute% 1.

The 203 0x00cb system cannot find the entered environment option. \r

205 0x00cd is located in the instruction subdirectory, and there is no signal subprocessor for any trip.

206 0x00ce file name or extension is too long.

207 0x00cf Ring 2 stack is in use.

People who use the Windows operating system sometimes encounter the following error message: "0X00000000 cannot write to the memory referenced by the 0X instruction", and then the application closes. If you ask some "experts", the answer you get is often indignation and disdain such as "Windows is too unstable". In fact, this error is not necessarily caused by the instability of Windows. This article will briefly analyze the common causes of this error.

Memory is not an easy way to solve reading problems.

First, the possibility of hardware is relatively small. If it is hardware, it should be caused by the incompatibility between the memory stick and the host. If the hardware cause (incompatible memory stick) can be eliminated, please replace the memory. If the memory stick is loose or dust accumulates, please unplug the memory stick again and clean the dust. ) look down:

2. Problems caused by the system or other software can be handled in the following ways: If the system itself has problems, please install the official patch in time and reinstall the system if necessary. Virus problem: anti-virus. Anti-virus software conflicts with other software: uninstall the problematic software. Are the drivers for video and sound cards installed correctly or are they maliciously overwritten? Reinstall the video card sound card driver.

1. Use the sfc command that comes with the system to repair the damaged system files and restore them to a normal state.

Start → Run → Enter cmd, open the command prompt window → Enter the string command sfc/scannow→ Enter → Wait patiently for the command program to search and scan each system file → Once the system file is found to be incorrect or damaged → A prompt interface will automatically pop up → Ask to insert the installation CD of Windows system → Extract normal system files from it to replace abnormal system files → Repair system files → Restart the computer at last.

2. The installed Domino program will cause problems. You can start → run →msconfig→ start the project → close the Domino startup item → If it can't be closed → You can use system setup software such as Kaka Assistant to forcibly close it → If it still doesn't work → Prove that your system is poisoned → Then reinstall or restore the system backup to completely solve it.

Third, disabling some system services may cause similar problems. For example, when the installation function of QoS RSVP local communication control is disabled, it may prompt that the RPC server is unavailable. Solution: Right-click my computer → Manage → Services and applications → Services → Double-click the QoS RSVP project, and change the startup type to manual or automatic → Close the window → Restart the computer. If other services are disabled, you can also solve the problems caused by them by re-enabling them in this way.

Four, the browser memory can't read and write:

1, run →regedit→ enter the registry, and then →

HKEY _ LOCAL _ MACHINE \ SOFTWARE \ Microsoft \ Windows \ current version \ Explorer \ shellexecute hooks

This location has a normal key value {aeb6717e-7e19-1d0-97ee-00c04fd91972} and a "default" reservation; Delete the others.

2. Open the CMD window and enter the following command:

For% I(% windir% \ system32 \ *). Regsvr32.exe/s%, I input.

For% I(% windir% \ system32 \ *). Have I entered regsvr32.exe/s%?

After completing two separate operations, restart the machine.

5. If the above methods can't be solved, you can only use the last resort:

Fully register dll: Open the "Run" input →cmd→ Enter.

Then copy the following lines of characters into the black cmd box, press enter, and wait until all dll files are registered before closing. To prevent input errors, you can copy this instruction, then click the right mouse button at the command prompt to paste and press enter, and wait patiently until the screen stops scrolling.

(Here is the code to run):

(%1 in %windir%\system32\*. regsvr32.exe/s % 1

Restart the machine when it is finished.

6. If you don't use Microsoft Component Services. Framework → then uninstalling this service may solve the problem: Start → Settings → Control Panel → Add and Remove Programs → Network. Frame → Delete (If you must use it, please restart your computer and install NET. Frame again).

Seven, the final report (palliative):

1. Right-click My Computer → Properties → Advanced → Error Reporting → Error Reporting → Select the Disable Error Reporting → Notify me when a serious error occurs check box → OK. In this way, for some small errors, Windows XP will not pop up error prompts.

2. If not, please turn off the error reporting service completely. Start → Enter Operation → Service. Msc→ Open the service window → Find the error reporting service → Open the properties dialog box of the error reporting service → Change the startup type to disabled → Confirm and restart the system. (Method of closing the registry of this project: Start → Run → Enter regedit→ OK → Find HKEY _ Local _ Machine \ Software \ Microsoft \ Windows NT \ Current Version \ AEdebug], and change Auto=0 to Auto= 1. )

The simple and effective way to deal with this problem is to check the error message, uninstall the software if it causes conflict, then close the antivirus software and rerun the installation after restarting the machine.