How to make hand-painted posters? Tips for making hand-painted POP

Six steps and techniques for hand-painted POP posters. General process of making hand-painted POP posters

Step 1: Collect content related to activities or products

Chapter Step 2: Refine the title and streamline the text

Step 3: Choose the appropriate layout

Step 4: Choose the appropriate color combination

Step 5 : Choose relevant illustrations

Step 6: Make POP according to the requirements of the format. Tips for making hand-drawn POP. Practice hand-drawn POP orthographic or movable type

Words are the basis of a poster. It is recommended that beginners buy a copybook and use markers and calligraphy grids to practice calligraphy. Master several commonly used font decoration methods

The title word is the soul of a poster. Making a good title word can not only highlight the theme, but also make the picture more vivid. But there are many ways to decorate titles, and beginners may not find the direction. You might as well find several decoration methods you like during practice. This way, it will not only be easier to master the techniques, but also the learning effect will be better. While shortening the production time, it will quickly improve the quality of students' hand-painted POP posters. Pay attention to the typesetting layout

The simplest typesetting is horizontal layout. Beginners would rather seek stability than extravagant hope of survival and change. At this time, the main text and title words can be decorated with decorative lines or color blocks to distinguish them from each other, but also echo each other. Other layouts are as follows: the title, illustrations, and text each occupy about 1/3 of the poster area

The title and subtitle of a POP together should occupy 1/4 to 1/2 of the entire POP area. Usually In this case, the title occupies about 1/3 of the poster area. (When the POP text content is relatively small, the title can occupy about 1/2 of the poster area; when the text content is relatively large, the title can also be compressed to 1/4.) Leave space on all four sides of the poster

This is also called the external "breathing" of POP posters. If there is no breathing, the content written on the poster will be pushed to the four sides, which will make people feel suffocated and chest tight. The specific width of the blank space will vary according to the size of the poster. 2-open (530cm × 760cm) POP paper needs to leave 3 to 5 cm of blank space on all sides; 4-open (390 cm × 543 cm) POP paper needs to leave 2 to 4 cm of blank space on all four sides; Generally, leave 0.5 to 1cm blank on all four sides of the explosion card. The line spacing is greater than the character spacing

As long as the POP content has more than 2 lines (including 2 lines), it should be noted that the line spacing of each line of text must be greater than the character spacing. The specific line spacing size is generally between 1/3 and 1/2 of the character height. The requirement for word spacing is that words should be close to each other, but generally they should not be connected, and a certain gap should be left. Don’t use too many colors

One poster can have 3 to 5 theme colors. Too many colors will make it cluttered, while too few colors will fail to highlight the key points. For this reason, the author recommends that the title word can be written in 1 to 3 colors, the main text should be written in one color (that is, written to the end with one pen), and the key content (such as "delivery", price, date) can be written in another color. The choice of illustrations should be relevant to the product

For example, the picture below shows a slender young woman. It is easy to think that Besunyen’s target customers are young women, and her slender figure is more attractive. Highlight the slimming effect of the product. Activity poster production

Generally speaking, the main title of activity posters is relatively direct, so that people can know what activity it is at a glance, or the main title should be more interesting and the subtitle should be more straightforward. Expansion: The latest college student hand-painted POP poster design competition planning letter sample 1. Activity background

The exquisite and elegant campus is covered with a strong poster culture, and the literary and artistic atmosphere with rich content and diverse forms promotes the all-round development of students. . In order to promote the construction of campus spiritual civilization, prosper campus culture, enrich campus life, and show the color of Bijie College. Bijie University College Student Art and Design Association will hold a pop poster design competition in this exciting month of November! We hope that through this event, we can draw the attention of teachers and students to issues such as the construction of a quality-enhanced campus and the art (beauty) of campus event posters.

At the same time, it can promote students’ understanding of pop! Activity Introduction

1 Activity Name: Campus Hand-painted Pop Poster Design Competition

2. Activity Purpose: This activity not only allows all teachers and students to enrich campus culture and activate campus atmosphere. It can also increase the interest of teachers and students in the school in pop advertising and discover pop poster design talents with innovative awareness and strong design ability.

3. Organizer: Bijie College

4. Planning unit: Art Design Association

5. Venue: Art Square 3. Work plan:

1. Invite judges:

2. Preparation of funds: Implement the preparation of materials and money before November 10th

3. Activity process:

⑴Registration method: Register from November 10th to 14th, and indicate your name, contact number, and qq

⑵Preliminary competition: After registration, the contestants will create their own creations based on the given theme content. On November 20th, the works will be submitted to the Art and Design Association office for the judges to select the finalists.

⑶ Final: The final is held on the spot. The 4-open white paper used in the competition must be flat and clean. Other production tools and materials must be brought by the participants themselves. Participants who need help during the competition must inform the staff first. After the contestants complete their works, they will be collected by the staff and the contestants will quickly leave the competition venue.

(4) There are 4 service personnel at the competition site, 2 to serve the contestants and 2 to serve the judges. The competition time is one and a half hours, and submissions can be submitted in advance. The judges will score, and the highest score and the lowest score will be removed and the average score will be calculated as the final score. The results of the competition will be announced to the entire hospital.

Note: Excellent works that do not win awards will not be returned and will be kept as collections.

⑷Total score = (preliminary and final points)/2

(5) Awards: Honorary certificates issued by the Youth League Committee of Bijie College and the Art and Design Association 4. Participating objects and works of the event Requirements:

(1) Participants:

All students

(2) Work requirements:

①Work specifications: quarto

②Materials of the work: no limit on materials

③Form of the work: no limit

④Quantity of works: 1 piece

⑶Theme of the work : To be determined 5. Awards:

⑴. Award settings:

The first prize will be awarded RMB 100 and a certificate of honor;

The second prize and second place will be awarded RMB 80 Yuan and honorary certificates;

Three third prizes worth RMB 50 and honorary certificates;

Excellence prizes and ten honorary certificates

⑵. Activity process:

p>

Event promotion time: November 5th-November 13th

Preliminary submission time: November 20th-November 22nd

Preliminary result announcement time: November 24

Final time: November 28

Awarding time: December 2

Exhibition time: 12 On the sixth day of the lunar month, promotional poster requirements:

10 hand-painted campus pop posters, 4 each for the preliminary round and finals, and 2 winner-list announcement posters

Placement location: campus publicity board

Winner list will be announced on November 30th

As a prelude to the event, the natural quality of posters is very important in order to set an example that can lead to the art (beauty) of campus posters.

In order to achieve better publicity effect, the posters should have a certain sense of series, and the specifications will be arranged by the Art and Design Association

VII. Activity budget |:

Unit price (yuan) Quantity total price ( yuan) bonus certificate

First prize (one person)

1/2, 100 51105

Second prize (two people) 80 52170

Third Prize (three people) 50 53165

Excellence Award (ten people) 51050

Poster promotion 51050 Banner promotion 1203360 Judges and judges fees 1001010004 Card opening paper Entry equipment 0.5800400 marks Pen entry equipment 20501000 total 3300

Art Design Association

November 4, xx

2/2 How to make a poster? How to make a poster I want to learn a simple one PS1. Open PS, create a new blank document, set the background color to white, and define the document size according to implementation needs. 2. Then select a picture that can be used as a basemap and open it. Use the "Move Tool" to move the picture to the current document interface to create "Layer 1", and then press "Ctrl T" to adjust its size and position. Adjustment. 3. Then click the "Add Layer Mask" button in the "Layer" panel to add a mask to the current layer. Then select the "Gradient Fill Tool" to fill it with a "black and white" gradient. 4. Then open a picture that can be used as a base image, and apply a mask and gradient fill to it. And adjust its transparency to make it look slightly darker. 5. Insert another picture. Since the picture has a background, select the "Magic Wand Tool" to select and delete the background. Then set its "Layer Blending Mode" to "Hard Light". 6. Then select the "Text Tool", enter content related to the adventure theme, such as "SecretAdvertuers", set the shape of the text, and apply the style. The parameters are as shown in the figure. 7. Create a new layer and press "Ctrl Alt Shift E" to create a stamp layer. Execute "Filter" → "Artistic Effects" → "Poster Edge". 8. Then execute "Filter" → "Sharpen" → "USM Sharpening". The parameters and effects are as shown in the figure. 9. Finally, add some textual description information and apply relevant styles. The final effect is shown in the figure. How do novices make posters? The basic detailed process of poster design. I am talking about hand-painted ones. First, buy paper. Buy poster paper 79cm*109cm, which is available in black and white. Generally, one sheet is used vertically. This is the most basic paint. Generally, advertising colors are cheaper. Markers are generally used for short-term posters. When drawing with markers, you must first determine what the theme you want to draw is, and then make a sample, which is to draw a rough picture on the paper, where to write, and where to draw. Think about everything, and then draw it on the sea. Write the title of the newspaper according to the sample. Write the title at the top and write the title below. Write the specific content of your event that the latter will promote. Use pop characters in small fonts and prominent words. You can check online and there are also books. If you need to draw posters for a long time, buy a few. Books in this area are always useful. In fact, posters do not need to stick to one format to draw different contents. They can use different formats. Like this one, you can write the title "Exhibition Board for Exchange Activities between New and Old Students" and write about the content of political study and life. Find an open space to draw some lace, or find a larger piece of land to draw any flowers, trees, cartoon characters. It depends on what your content is and what you draw is basically these. Let me give you a picture. This is the most basic and a bit overwhelming. It should be long (remind you, you said it would be sent to your email, where is the email). How to design a poster? First, look at other people's posters of the same type, then refer to a few more and learn from each other's strengths. Making your own. How to make a poster using Word? File - New - there will be an online dialog box on the right side. If you find it, it will be fine. However, I personally think that if you are making a poster, it is not much different from an ordinary poster or the like. It mainly depends on your layout and As long as you are proficient in word, it will not take much effort to do it if you want to do it well. How to make a huge poster? If there is no m unit indentation in the software, it will be fine.

1400x200 inkjet printing 30-50dpi printing 300dpi How to make a poster using PS to make a poster 1. Open the material picture (open the picture with people as appropriate) 2. Image-Adjustment-Decolor 3. Image-Adjustment-Invert 4. Image - Levels (for image adjustment) 5. Load the channel. Method: Select all images in the canvas (select under the menu - all), edit - copy (or ctrl c), click the channel panel - create a new channel, edit - paste (or ctrl v) - cancel constituency. 6. Load the "channel" as a selection. 7. Return to the layer panel - create a new layer and hide the background layer - click on layer 1 (that is, the new layer) - Alt Delete to fill the foreground color (front When the scenery is black) - cancel the selection. 8. Create a new layer 2 - move layer 2 below layer 1, ctrl Delete to fill the background color (if the background color is light, you can also choose it according to your preference) Color) 9. Select a brush to erase the background, and then type and edit (the erasing effect is as shown in the picture). How to make a poster requires primary school students! How to make a poster in Word can be designed and typeset. It's very beautiful. Even if you don't have imagination, the potential in Word is quite large. You can: 1. Insert a text box, and you can choose horizontal or vertical arrangement according to your needs. You can set different text in the text box than the text outside the box. Font, font size, and font color. If you don’t want the box, set the border to “no line format” in the text box format. 2. Insert word art, which can be arranged horizontally and vertically, and the size of the font can be easily set. , font, color. 3. Insert a picture, which can be a clipart in the word clipping library, or your own picture or photo saved in your computer. It can be used as a picture for the article or as the background of a certain part of the newspaper. Texture. (Insert - Picture - From File). 4. Use "Column" and "Drop Cap" in the "Format" toolbar to create special effects. 5. Use the functions in the "Draw" button to make some modifications. After using these functions, your layout will be beautiful. How to set the size of a poster using PS - New - Default Size - Default Photoshop Size - Select cm for width and fill in 80 for height - Select cm for height and fill in 120 for resolution. How to fill in the poster image with 300 pixels/inch at the back depends on the purpose. For amateurs, just use beautiful pictures. For professionals, use PS or find an advertising company. Maybe I can help you with some tips for making hand-drawn POPs

Hand-painted POP production tips

Hand-painted POP posters are a popular form of advertising. If you want to get a beautiful POP poster, you must improve the composition, graphic arrangement, text, color matching, and process. Work hard. Here are the tips for making hand-painted POPs. Welcome to refer to them. Tips for making hand-painted POPs. Practice hand-painted POP lettering or movable type

It is recommended for beginners to make posters. Buy a copybook and use markers and calligraphy grids to practice calligraphy. Master several commonly used font decoration methods

The title word is the soul of a poster. Making a good title word can not only highlight the theme, but also highlight the theme. It can make the picture more vivid. However, there are many ways to decorate the title, and beginners may not find the direction. You may wish to find a few of your favorite decoration methods during practice. This will not only make it easier to master the technique, but also the learning effect will be better. , while shortening the production time, it can quickly improve the quality of students' hand-drawn POP posters. Pay attention to the layout and layout

The simplest layout is horizontal layout. Beginners prefer stability to flexibility and change. At this time, the main text and title words can be decorated with decorative lines or color blocks to distinguish them from each other, but also echo each other. Other layouts are as follows: the title, illustrations, and text each occupy about 1/3 of the poster area

The title and subtitle of a POP together should occupy 1/4 to 1/2 of the entire POP area. Usually In this case, the title occupies about 1/3 of the poster area. (When the POP text content is relatively small, the title can occupy about 1/2 of the poster area; when the text content is relatively large, the title can also be compressed to 1/4.

) The four sides of the poster are left blank

This is also called the external "breathing" of the POP poster. If there is no breathing left, the written content of the poster will be pushed to the four sides, which will make people feel suffocated and uncomfortable. stuffy. The specific width of the blank space will vary according to the size of the poster. For 2-open (530cm×760cm) POP paper, 3 to 5 cm of blank space is required on all four sides; for 4-open (390cm×543cm) POP paper, 2 to 4 cm of blank space is required on all four sides. ; Generally, leave 0.5 to 1cm blank on all four sides of the explosion card. The line spacing is greater than the character spacing

As long as the POP content has more than 2 lines (including 2 lines), it should be noted that the line spacing of each line of text must be greater than the character spacing. The specific line spacing size is generally between 1/3 and 1/2 of the character height. The requirement for word spacing is that words should be close to each other, but generally they should not be connected, and a certain gap should be left. Don’t use too many colors

One poster can have 3 to 5 theme colors. Too many colors will make it cluttered, while too few colors will fail to highlight the key points. For this reason, the author recommends that the title word can be written in 1 to 3 colors, the main text should be written in one color (that is, written to the end with one pen), and the key content (such as "delivery", price, date) can be written in another color. The selection of illustrations should be relevant to the product

For example, the picture below shows a slender young woman. It is easy to think that Besunyen’s target customers are young women, and her slender figure can better highlight the The slimming effect of the product. Activity poster production

Generally speaking, the main title of activity posters is relatively direct, so that people can know what activity it is at a glance, or the main title should be more interesting and the subtitle should be more straightforward. ;

Find corporate services on Zhubajie.com and deliver with guaranteed acceptance before payment