[Recommended] Substation work summary 4 articles

Work summary of four substations is recommended.

Summary is a written material to evaluate and describe the achievements, existing problems, experiences and lessons. Through it, you can get a comprehensive and systematic understanding of your previous study and work. You might as well sit down and write a summary. So how to write a summary in a new way? The following is a summary of my work in four substations. Welcome to reading. I hope you will like them.

Born to be curious about everything in society. I just came to the substation, and I was not used to it at first. Over time, I gradually integrated into the big family of this small substation. In this short time, great changes have taken place in my mind. I feel more mature now, and my attitude towards things has changed a lot. I hope I can stick to it, overcome difficulties and do the following:

First, based on the post

In the spirit of starting from small things, starting from one's own job and starting from one's own post, we will do every job well in a down-to-earth manner. Law-abiding, honest and clean. According to the actual situation, we should sum up experience in time, find out our own shortcomings, reflect on ourselves, constantly improve ourselves, and strengthen our own quality through reflection, summary, perfection and improvement.

1, learn from the master. Learn from an old master. Experience is a valuable asset, accumulated through years of work, which cannot be learned from books.

2. Learn from manuals and technical books. Each equipment in the substation has an instruction manual, which explains in detail the matters needing attention in various situations of the equipment, which must be paid attention to during operation and maintenance. Various technical books are the best materials to improve their theoretical knowledge. Only by reading the equipment manual of this site can we fully understand the equipment situation of this site.

3. Report the accident. Every accident report is a lesson of blood and tears. Through the study of the accident report, we can understand the cause of the accident and take preventive measures to prevent similar accidents from happening in ourselves and around us.

4. Learn from the construction team. When there are constructors working in the substation in the station, the operators should actively cooperate, understand the construction steps, construction technology and matters needing attention, and ask the constructors why they do so, so as to improve their professional level.

Second, self-development

Constantly improve their knowledge level, improve their business skills and improve their ideological quality. Actively participate in the training of electric power technology knowledge, fully embody the principle of individual independent learning and cooperative inquiry learning in the training, actively and individually study under the guidance of professional and technical teachers, pay attention to the individual differences between teams and groups, try to meet the learning needs of different duty personnel, create a situation that can guide team members to actively participate in learning skills and knowledge, stimulate their learning enthusiasm, and improve their innovative spirit and practical ability.

Third, adhere to the daily management work.

1, familiar with daily operation management and substation creation.

Do your job well during class every day and do it according to the tasks assigned by the daily monitor.

2, familiar with substation operation and maintenance operation and accident treatment.

Adapt to the post of substation operation and be a qualified substation attendant. With the educational guidance of the master, the help of my colleagues and my own efforts, I quickly mastered the operation of substation and the production processes of various substations.

Know the specifications and parameters of primary and secondary equipment, understand the system and wiring mode of this station, be proficient in filling in switching operation tickets and one or two working tickets under various operation modes, complete the daily operation of substation, and deal with complex accidents and equipment anomalies. According to my years of work experience, I have explored some shortcuts in my work and improved my work efficiency. I can quickly grasp the operation of the equipment, preliminarily judge the equipment failure, avoid the fault finding error, extend the power outage time and narrow the accident scope: I can directly find the abnormality of the equipment with the naked eye.

For example, porcelain bottles are broken, deformed, leaked and discolored. Listen, you can also judge by your ears: transformer, oil switch, etc. There is a big difference between normal operation and fault operation. The fault can also be preliminarily judged by the smell of the nose: transformers, outdoor high-voltage transformers and other abnormal smells are different, and through the measurement method, we can grasp the exact data. For example, according to the change of equipment load, use infrared thermometer to test whether the equipment temperature is abnormal.

3. Be familiar with the rules and regulations.

Without rules, there would be no Fiona Fang. Various rules and regulations are the basis and guide of our work. We must make clear the rules and regulations of this post, and get familiar with them and apply them to our daily work as soon as possible. For example, it is necessary to know which behaviors belong to first-level violations, second-level violations and third-level violations. Only by understanding these contents can we avoid violating the rules in our work.

As employees of electric power enterprises, it is the responsibility of every employee to ensure safe operation. To be a qualified electric power enterprise employee, we should have the concept of "people-oriented, loyal to the enterprise and contributing to the society" and the core values of "honesty, responsibility, innovation and dedication". Constantly learn and improve, strive to improve their own business level, contribute their strength in ordinary posts, and contribute to enterprises and society.

In 20xx, with the correct leadership and help of the company leaders and the joint efforts of all the staff on duty in the distribution room, our station always regards the safe and economic operation of the distribution system as the main task of substation management, and insists on safety first. The specific safety work is summarized as follows:

(1) The station always puts safety work in the first place, puts work in the first place, and strictly implements electrical safety regulations and various rules and regulations of the company in the work.

2) Conduct regular safety education to raise everyone's awareness of safety in production, and make it clear that without safety, the venues in the sports center can't guarantee normal power supply and the National Games can't be held smoothly.

(3) Constantly improve the technical level of the attendant, insist on making a fuss about the quality of personnel, take the old with the new, teach each other, learn from each other's strengths, carry out technical training on a regular basis, and conduct anti-accident drills in combination with the actual situation in the station and the National Games. In order to make progress from the shortcomings, due to the above measures, the professional quality of the station staff has been improved to varying degrees, familiar with the performance and operation mode of equipment, able to handle and analyze accidents, and familiar with the equipment, performance and rules and regulations of this position. Because of the advanced equipment and high technology content, on-site training is often carried out to ensure the safe operation of the equipment.

(4) Various systems are complete, responsibilities are clear, and there is no violation. The handover system operates in an orderly manner according to electrical safety regulations and company requirements. There were no unclear handover, lax handover and untimely handover. Labor discipline is strengthened, and there is no phenomenon of leaving the post and leaving the post. Have a work permit when going to work, and don't do anything unrelated to work. You are always in a full state of mind.

5) Everyone is responsible for equipment management. Do a good job of equipment inspection and defect elimination, adjust the power factor in time in combination with the load measurement of distribution equipment, and implement single power supply operation when there is no important event to reduce reactive power loss. Check the equipment on time, and there is no delay or omission in the inspection. In the case of operation mode change, heavy load, abnormal equipment failure, bad weather, etc., the number of inspections shall be increased as required, so that the equipment in our station will always be in good condition, and the abnormal situation will be handled in time to ensure the safe, reliable and economical operation of power supply equipment.

(6) All records shall be neat, standardized and complete, and there shall be no mistakes and omissions, and the time shall not be inconsistent, and the "two votes and three systems" shall be strictly implemented.

(7) The substation safety work is carried out as planned, so as to check the project to people, set the completion time, set the results and requirements, check the measures to prevent small animals once a month, and plug the loopholes in time when found. Safety appliances should be checked before use, and should be used after expiration. It is forbidden to use expired or unqualified appliances.

Because the safety work of our station is carried out according to the above contents, there has not been an accident in 20xx years, and there has not been an equipment accident caused by inadequate inspection equipment, which has ensured the safe and normal power supply of the company.

Thoughts on annual safety work of substation

In order to seriously implement the policy of "safety first, prevention first", ensure the safety of equipment, ensure the safe and economic operation of power transformation and distribution equipment, and ensure the safe and normal power supply of the company, the annual safety work idea of power distribution room is formulated.

1. Clarify the objectives, implement the responsibilities, strengthen the safety awareness, start with the safety awareness of the personnel on duty, strengthen the awareness of "safety first, prevention first", carry out labor competitions such as "no accidents for 100 days" and "no mistakes for thousands of people", put an end to illegal operations, and no accidents occur throughout the year.

2. Improve the rules and regulations, and strictly implement the Regulations on Electric Safety Work and the company's various rules and regulations.

Organize regular study of safety regulations.

3. Improve the emergency response mechanism and improve the emergency response capability. Wiring and equipment have always been the top priority in the safety work of the distribution room. The power distribution room will strengthen safety management, formulate and improve emergency plans, strengthen the emergency handling ability of the personnel on duty for sudden accidents of lines and equipment, and implement safety measures according to the requirements of the power department and the company.

4. Regular maintenance, strengthen inspection, to ensure safe and stable operation. In addition to daily maintenance, power outage maintenance will be carried out in spring and autumn, and patrol management of lines and equipment will be strengthened in daily work to ensure timely patrol, timely discover and eliminate hidden dangers, and ensure the safe and normal operation of equipment.

(1) The station always puts safety work in the first place, puts work in the first place, and strictly implements electrical safety regulations and various rules and regulations of the company in the work.

(2) Conduct regular safety education, improve everyone's awareness of safety in production, and make it clear that without safety, the venues in the sports center cannot guarantee normal power supply and the smooth holding of the National Games.

(3) Constantly improve the technical level of the attendant, insist on making a fuss about the quality of personnel, take the old with the new, teach each other, learn from each other's strengths, carry out technical training on a regular basis, and conduct anti-accident drills in combination with the actual situation in the station and the National Games. In order to make progress from the shortcomings, due to the above measures, the professional quality of the station staff has been improved to varying degrees, familiar with the performance and operation mode of equipment, able to handle and analyze accidents, and familiar with the equipment, performance and rules and regulations of this position. Because of the advanced equipment and high technology content, on-site training is often carried out to ensure the safe operation of the equipment.

(4) Various systems are complete, responsibilities are clear, and there is no violation. The handover system operates in an orderly manner according to electrical safety regulations and company requirements. There were no unclear handover, lax handover and untimely handover. Labor discipline is strengthened, and there is no phenomenon of leaving the post and leaving the post. Have a work permit when going to work, and don't do anything unrelated to work. You are always in a full state of mind.

(5) Everyone is responsible for equipment management. Do a good job of equipment inspection and defect elimination, adjust the power factor in time in combination with the load measurement of distribution equipment, and implement single power supply operation when there is no important event to reduce reactive power loss. Check the equipment on time, and there is no delay or omission in the inspection. In the case of operation mode change, heavy load, abnormal equipment failure, bad weather, etc., the number of inspections shall be increased as required, so that the equipment in our station will always be in good condition, and the abnormal situation will be handled in time to ensure the safe, reliable and economical operation of power supply equipment.

(6) All records shall be neat, standardized and complete, and there shall be no mistakes and omissions, and the time shall not be inconsistent, and the "two votes and three systems" shall be strictly implemented.

(7) The substation safety work is carried out as planned, so as to check the project to people, set the completion time, set the results and requirements, check the measures to prevent small animals once a month, and plug the loopholes in time when found. Safety appliances should be checked before use, and should be used after expiration. It is forbidden to use expired or unqualified appliances.

Because the safety work of our station is carried out according to the above contents, there has not been an accident in 20xx years, and there has not been an equipment accident caused by inadequate inspection equipment, which has ensured the safe and normal power supply of the company.

Thoughts on annual safety work of substation

In order to seriously implement the policy of "safety first, prevention first", ensure the safety of equipment, ensure the safe and economic operation of power transformation and distribution equipment, and ensure the safe and normal power supply of the company, the annual safety work idea of power distribution room is formulated.

1. Clarify the objectives, implement the responsibilities, strengthen the safety awareness, start with the safety awareness of the personnel on duty, strengthen the awareness of "safety first, prevention first", carry out labor competitions such as "no accidents for 100 days" and "no mistakes for thousands of people", put an end to illegal operations, and no accidents occur throughout the year.

2. Improve the rules and regulations, and strictly implement the Regulations on Electric Safety Work and the company's various rules and regulations.

Organize regular study of safety regulations.

3. Improve the emergency response mechanism and improve the emergency response capability. Wiring and equipment have always been the top priority in the safety work of the distribution room. The power distribution room will strengthen safety management, formulate and improve emergency plans, strengthen the emergency handling ability of the personnel on duty for sudden accidents of lines and equipment, and implement safety measures according to the requirements of the power department and the company.

4. Regular maintenance, strengthen inspection, to ensure safe and stable operation. In addition to daily maintenance, power outage maintenance will be carried out in spring and autumn, and patrol management of lines and equipment will be strengthened in daily work to ensure timely patrol, timely discover and eliminate hidden dangers, and ensure the safe and normal operation of equipment.

This year, under the correct leadership of the company, we have conscientiously implemented the operation management systems such as "State Grid Corporation Substation Management Specification" and "Company Substation Operation Management System", adhered to the people-oriented principle, highlighted standardized and standardized management, relied on scientific and technological progress, strengthened safety management, continuously deepened and refined substation operation management measures, and studied and solved problems in the work in advance, and achieved certain results.

Main work in xxxx year

In * * years, the vast number of operation and maintenance personnel on duty overcame many difficulties such as fewer personnel and heavy tasks. They carefully operated, carefully operated, carefully patrolled, and did all the work in a down-to-earth manner, and successfully completed the work objectives in * * years. There were no personal injuries and major equipment accidents caused by the responsibility of operators and maintenance personnel, and there were no on-site misoperation and accidental electric shock accidents, which realized 300 days of safe production in XXX years.

1, implement the safety production target, and sign the responsibility certificate layer by layer.

At the beginning of the year, after the company held a kick-off meeting, we formulated the safety production objectives and control measures, and signed the "Safety Production Responsibility Certificate" with hard indicators and strong operability, which decomposed the safety responsibilities step by step and implemented them to teams and individuals.

2. Equipment maintenance has been strengthened, and the level of power grid equipment and equipment health has been continuously improved.

Combined with spring and autumn maintenance, we will conscientiously implement various countermeasures, actively carry out equipment management, and continuously improve the health level of equipment. Based on the detailed inspection and analysis of the substation, detailed maintenance and rectification measures are formulated. Reasonable arrangement and coordination with dispatching eliminated the major defects of equipment in time and ensured the safe and stable operation of power grid. For example: 12 at one o'clock in the morning of April, and ×××× year×× month× day× month× day× month× day× month× day× month× day× month× month× day× month× day× month× day× month× day× day× month× day× day× month × day× day× month × day× month × day× month × day× month × day× month × month × day× month × month × month × day× month × The management of equipment defects has been strengthened, and the elimination rate and rectification rate of equipment defects have reached 100, ensuring the safe operation of equipment.

3, careful inspection, careful operation, the successful completion of the annual stop sending task.

In order to do a good job of power outage, there are few maintenance teams and substations, and there are many cooperative and sporadic operations. A maintenance team can operate up to three substations at the same time. In the face of difficulties, operators strictly implement the "two votes and three systems" and regard switching operation, equipment inspection and maintenance as the top priority of substation operation. Earnestly implement the pre-operation warning system, make the operation plan in advance for large-scale operations, prepare for the "three major measures", arrive at the operation site in advance, and check the correctness, standardization and standardization of the operation ticket. For small-scale operations, strictly implement the "dangerous point" reminder system before operation, control and master the emotional changes of personnel, and effectively prevent misoperation accidents. In XXX years, there were 7 15 operation tickets and 92 working tickets, and the qualified rate of duplicate tickets reached 100.

4. Team building has been strengthened, and standardization and standardized management have been gradually realized in the work area.

According to the assessment standards for team construction of provincial companies, we will adhere to the establishment of safety production targets, annual work plans and monthly work plans at the beginning of the year, and implement them as planned. Hold regular and irregular class meetings every month, conduct four safety activities every month, conduct anti-accident drills every quarter, conduct accident prediction, operation analysis and safety training once a month, conduct work summary and political study once a year, and conduct regular safety assessment. Conduct regular suppression tests on the safety instruments of each station, strictly implement the instrument "32" management policy, verify the commonly used debugging equipment according to the requirements of qualified standards, affix the certificate of approval, and timely seal up and supplement the unqualified ones.

5. Emphasize standardization and refinement, and improve the level of operation and maintenance management.

* * We have done a lot of work on the standardization and refinement of substation operation management in order to implement the substation management norms of State Grid Corporation, standardized operation instructions for equipment inspection, standardized operation management regulations of Hunan Province, detailed implementation rules of standardized operation of State Bureau, supplementary regulations of Hunan Electric Power Company on double-ticket management and key points of on-site safety supervision. In order to strengthen the planning and operability of substation operation and maintenance management, we have implemented standardized operations. Now whenever we have operations and operations, we have standardized operating procedures and follow the process to prevent personal and equipment accidents for one year.

The acceptance of newly put into operation equipment has been strengthened, and the new equipment of Hexi Substation 4 14 and Qifeng Substation has been strictly accepted. Insist on urging the construction unit to solve the remaining problems according to the drawings, earnestly implement the owner responsibility system for new stations and new equipment, and eliminate the defects in time (such as changing the oil shortage switch in Yantouzhai Substation and Roy Substation, preventing the blockage of the small beast cave in Qifenghu Substation and Suburb Substation, and removing rust and painting at intervals of 35kv and 10kv between Roy Substation and Hexi Substation). In order to strengthen the operation management of substations, the Code for Field Operation of 35kv Substations was revised, and the main wiring diagram of each substation, the reconstruction of equipment account of newly put into operation and newly spaced substations, the resistance test of grounding grid and the charging and discharging test of DC system batteries were completed. Suburban substation and capacity expansion project, Qifeng substation newly put into operation equipment number twice. The prepayment system of suburban substation line 3 14 is installed in cooperation with the metrological verification station. Complete the external audit of ISO 900 1-XX quality system. Check the fire-fighting equipment regularly and install the ice-melting knife gate in Daxiping. More than 60 accidents were eliminated by maintenance throughout the year. At present, the battle against freezing and melting ice has started, and the materials and equipment have been prepared accordingly, ready to fight the ice and snow war at any time. Deeply absorbed 7. Drawing lessons from major casualty accidents, we carried out the "Three Needs and Six Inspections" safety week and achieved certain results.

6. Strengthen business training and improve business quality.

In order to improve the professional quality of employees and adapt to the constantly updated modern equipment, we have adopted the methods of sending employees out to study and organizing training by ourselves to improve their professional level. Such as new procedures training, team building training, main transformer module operation training, relay protection training, double-ticket management training, substation operation and maintenance training, secondary loop installation training, standardized operation double-ticket management supplementary provisions training, etc. The total number of trainees has reached 75, and we attach great importance to the performance and use of new contact equipment. On June 65438+1October 65438+May this year, we invited factory personnel to conduct microcomputer joint defense for all peacekeeping detachment personnel in Guzhang Substation.

In short, in * * years, our substation personnel devoted themselves to the operation and maintenance of Guzhang power grid, ensuring the safe and stable operation of the county power grid. * * years have come, and * * brilliant spring has come. In the new year, we will continue to adhere to the people-oriented, highlight standardized management, rely on scientific and technological progress, strengthen safety management, and constantly deepen and refine substation operation management measures. We will take the stability of Guzhang power grid as our responsibility, take the safety of Guzhang power grid as our goal, and make our due contribution to the development of enterprises and the improvement of economic benefits.