Send a message to Nokia 3230 via Bluetooth, and the message displayed on the mobile phone is accepted, because the memory of the mobile phone itself is too small, so send it.

[repost] detailed installation and use tutorial of SMS e software

Detailed installation and use course of SMS to electronic software (written by my installation experience)

1) Use Bluetooth, infrared and data cable to transfer the SMS-to-E software to the mobile phone storage (or memory card) for direct installation, or use the card reader to copy the SMS-to-E software to the memory card, and open the menu \ Tools \ File Management \ Memory card \ SMS-to-E for installation, or use the system resource software to open the SMS-to-E software for installation;

2) When installing, choose to install on the E disk (memory card), remember!

3) After the installation, return to or enter the menu, and the icon "MsvDriveE" of SMS-to-E software will appear in the menu. At this time, open "Information" first. There should be no memory card mark on the left side of the "Information" in the information window, that is, the SMS software is not running. Please return to the menu and run the SMS software "MsvDriveE" only once. Remember! (If you run it again, there will be an error), and then enter the information window again. At this time, the mark of memory card should appear on the left side of "Information" on the information window, that is, the SMS-to-E software has worked, and the information in the information window is sent and received on disk E;

4) Transfer the information originally sent and received on disk C to disk E: After the SMS-to-E software has been working, copy the entire "mail" folder under disk C \system\ to the next temporary new folder under disk E through system resource software (such as FExplorer, System Explorer and SmartFileMan), exit, shut down, dial out the memory card and start. At this time, sending and receiving information to drive C will resume, and there should be no memory card mark on the left side of the information window "Information". At this time, the hot-plug mobile phone (such as Lenovo P930) is directly inserted into the memory card, and the non-hot-plug mobile phone needs to be turned off and plugged back into the memory card, and then restarted, and the entire "Mail" folder is deleted or removed through the software of system resources. Then copy the entire C drive \ system \ mail folder originally copied to the next temporary new folder of E drive to the E drive \ system directory (or replace it with the C drive \ system \ mail originally copied to the next temporary new folder of E drive without deleting E drive \ system \ mail); In addition, the C drive \ system \ mail originally copied to the next temporary new folder of E drive on PC can be replaced by E drive \ system \ mail through the card reader.

5) Return to the menu and run the SMS-to-E software "MsvDriveE" once, and return to the state of sending and receiving information on disk E. At this time, you can check the information originally sent and received by disk C.:

6) Turn off the power, unplug the memory card, turn on the power and plug it back in. At this time, you can resume sending and receiving information on disk C, and run the SMS-to-E software "MsvDriveE" in the menu once, or you can resume the sending and receiving status of disk E;

7) If you accidentally run the SMS-to-E software "MsvDriveE" repeatedly and make mistakes, you can operate it again according to the method in 6) to restore the normal state of sending and receiving information on the E disk.

In addition, some people think that the speed of sending and receiving information is a bit slow. Please add some explanations:

1) It is impossible to expect that SMS-to-E software below 2k (updated version has 2.6k) has too many functions. Gu Shiming believes that its basic function is to transfer information between disk C and disk E, and the sending and receiving of information is still carried out by the information sending and receiving program of Sysbian system located in disk C. When disk E sends and receives information, SMS-to-E software transfers the information to be sent to the cache of disk C, and then transfers the successfully sent information back to the "sent information" of disk E, which is collected in the cache of disk C when it is received. Then it is transferred to the inbox or mailbox of E disk by SMS to E software, so that the time of sending and receiving information is longer than that of sending and receiving information directly from C disk, that is, the time of transmitting information between C disk and E disk is more;

2) SMS-to-electronic software is suitable for people who often send and receive messages or large-capacity messages, or those who delete messages cleanly or like to keep them. It doesn't care that the speed of sending and receiving messages is slightly prolonged, but it also wants to reduce the occupation of C disk in a limited space, and it doesn't want to use annoying locks and inconvenient methods to access backup information frequently. Therefore, I think it is a software worthy of recommendation and must be installed on smart phones, especially for sending and receiving large-capacity information such as multimedia messages and emails.

After installing msvDriveE, you can send and receive large files with Bluetooth. Let's talk about the installation and use of software first: only 1KB. After installation, the icon in the menu opens the software, but when some versions are opened, "System Error" will be displayed. At this point, exit immediately. Just open "Information" and see a small icon in the upper left corner of the information bar, and the installation is complete. Use it to send and receive large files: When QD sends or receives files larger than 3.5M via Bluetooth, the system will display "Insufficient memory, please delete some data" (the principle is to receive or send through disk C at this time), but it will be completed through disk E after installing the software. Steps to send a large file: use the system management software to find the file to be sent (such as MP3), and select Send-Bluetooth Send, 3-"Most Important": the other party receiving the file must

You must have the memory space of the file you want to send, and your E drive should also have more memory space than the file at this time (for example, if you want to send a 6M MP3, the other party's mobile phone must have 6M memory, and your E drive should also have more than 6M memory. 4- Receiving files: After installing the software, as long as the other party sends files via Bluetooth, no matter how big the files are, press "Yes" to receive them. The following are some problems in installing the software: after installing the software, as long as the card is taken out in standby mode, you can't surf the Internet with your own browser (you can't store information without inserting the card when you enter the browser), and the installed information is automatically stored in the E disk, so you can't restore the storage of the C disk (unless you restart Kolor). The reason is that there are dozens or hundreds of B subfiles in drive C after installing the software. Delete the file: C/SYSTEM/Data/msgs.ini can be restored (that is, whether the file exists in the Data folder is the key for the SMS not to be sent to E, see another way below). To sum up the perfect use: after installing the software, the first thing to do is to enter the menu to open the software, and then exit immediately, and see the icon in the upper left corner of the information. Then delete: APPS file in C or E (menu has no icon), send it if you want, and collect it if you want. When you want to resume sending and receiving the card on disk C or carry it with you, MMC card can still access the Internet. Just cut (rather than copy) the file: C/SYSTEM/Data/msgs.ini into any folder on drive C or drive E (it's better to be easy to retrieve), if you want to transfer the information to drive E again in the future. Second: Open the software in the menu, and then quit immediately. If you see an icon in the upper left corner of the message, don't delete the software (you can turn to E). If you want to delete, pull out the card, and then insert it after restarting, thus restoring the storage of disk C. If you want to transfer the data to E, you can enter the menu, click the software and exit. The second method must make the software have ugly icons in the menu. The first method only needs to take the card and restart it in standby state, and then divide the data file into E disk and restart it before cutting.

The first one can be recommended)