How does Mercedes-Benz eliminate maintenance tips?

1. Maintenance tips will appear in the dashboard. It is estimated that your car will be repaired soon. Only when you carry out maintenance, the 4S shop will reset it for you, and the maintenance reminder will disappear, and you will be reminded again when the next maintenance mileage (or days) comes. The reset method is: turn on the first ignition switch, then adjust the display interface of the instrument panel to the odometer interface, press the telephone key of the function key group on the right side of the steering wheel, and then immediately press the OK key of the function key group on the left side of the steering wheel. The instrument will give a hint. Press the corresponding key according to the prompt. Self-reset is not recommended. Generally speaking, it can only be reset after maintenance. 2. If the service prompt is cancelled permanently, please go to the 4S shop and set it with the special diagnostic instrument of Mercedes-Benz Das, but it is not recommended. If there is no maintenance reminder system, sometimes your car can't be maintained in time, resulting in vehicle damage. Step 2: Turn the key to 1 and press Enter on the right side of the steering wheel, and the meter will display the mileage interface. Press and hold the OK and phone keys in the middle of the left and right steering wheels at the same time until the repair shop menu pops up and the voltage is displayed. Use the up and down buttons to switch to the maintenance line, select the appropriate option according to the arrow keys, and then press OK to confirm until the maintenance is reset. If maintenance is not carried out, it is best not to rule it out, and hide it with the back arrow on the right side of the steering wheel. 3. Press and hold the call key and OK key in the first position of the ignition switch for 5 seconds (please press the call key first) to exit the menu, select the assstplus maintenance code, press OK to enter, select OK to complete the maintenance, select OK to confirm the maintenance, and press OK to prompt the maintenance? Yes, then OK-When the prompt cannot be completed, select OK, and then turn off the ignition switch 4. First, emphasize that all operations are done on the steering wheel. First, turn the key to the first gear and press the arrow on the side of the steering wheel to find the mileage interface. Then press the answer key on one side of the steering wheel at the same time. Press the OK key on the steering wheel side first, and then press the OK key immediately. In this way, the success rate will be higher and higher until the interface shown in the figure appears. Then press the side arrow to select assystplus, and then press OK to enter this option. After entering, select the arrow as shown to confirm the completion of maintenance, and then press OK. After entering, select and press OK. Then select OK and press OK. After the prompt is completed, the maintenance prompt will be cleared, and it will be prompted again before driving.