How to turn off the self-reading number of incoming calls with Huawei mobile phone Bluetooth earplugs?

Turn on the phone setting function first, and then turn on GM, as shown in the figure below. Then open the auxiliary function in GM, as shown in the figure below. Enter the accessibility page, and turn down to the bottom of the page to see an audio call mode.

Bluetooth headset needs to support voice broadcast function to automatically answer and make calls. As shown in the figure: If the Bluetooth headset supports the Chinese voice broadcast function, when the phone rings, the user only needs to say "Answer" to answer the phone and "Reject" to reject the phone. I hope it will relieve your confusion.

If you use a Huawei mobile phone, please follow the following methods for troubleshooting: automatic dialing occurs in standby mode: check whether the speed dial function is turned on or set up, you can dial a specific number directly and delete the relevant settings to recover.

Turn on the Bluetooth headset in Bluetooth to see if there is a click between the media audio and the mobile phone audio.

The method is as follows: Enter the setting interface and click Bluetooth. Enter the Bluetooth interface, and click the setting icon behind the corresponding Bluetooth. Enter the paired Bluetooth settings and turn off the button behind the media audio.

The reason why the mobile phone is connected to the Bluetooth headset to automatically answer incoming calls is that the automatic answering function is turned on. You can turn it off in Auto Answer Settings in Phone Settings.