Apple mobile phone charging common sense

1. How long does it usually take to charge a new Apple mobile phone?

Correct charging skills of iPhone

1, the first charge is unnecessary 12 hours, just charge it;

2. Actually, it can be charged at any power, which has little influence on the battery;

3. It is best to have a complete discharge and charging process once a week, that is, from Hongchong to Wally. It's best to realize that the battery runs out almost once a week, and then it is fully charged.

4. The mobile phone has the function of overshoot protection, but it is still recommended to unplug it after it is full, and it is not recommended to charge it for a long time.

5. When charging to 100%, unplugging the charger is the best time. After charging to 100% for one hour, the battery charge when unplugging the charger is not as good as when it was just fully charged. In other words, after being fully charged, the iPhone has entered the overshoot protection and stopped charging, and the next time is only the battery consumption process.

6. When the battery is low, stop playing with the mobile phone or talking in time and charge it as soon as possible to maintain the battery life.

2. What do you need to know about Apple's mobile phone battery charging?

The following are some tips for charging Apple's mobile phone battery: the first time charging, the prompt is full, it is best to continue charging 15 minutes, and don't charge for too long; Use 20% less equipment before charging, which can reduce charging times and improve battery life. In addition, cut off the power supply when it is fully charged, and don't charge for too long. Be sure to use Apple's own charger for charging, and don't use chargers of other products to avoid damaging iPhone devices; Finally, use USB to charge, and the lithium battery is better maintained; Start charging when the power is less than 20%, and charge for a complete cycle when it is fully charged; Reducing the number of cycles is to start charging as low as 20%. Finally, you can do regular charging once a month. For example, after the device is automatically turned off, it can be fully charged. This interval is best not to be too short.

3.3. What are the tips for iPhone charging?

Regardless of whether a lithium battery is used or not, the "battery life" is generally only three to five years at most. After 500 charge and discharge cycles, the properly maintained iPhone battery can still retain 80% of the original battery capacity. Here, charging from 0% to 100% and then using 0% is a complete charging and discharging cycle, from 50% to 100%.

2. The most important thing about lithium batteries is that they can't be turned off automatically, which will accelerate the loss. Lithium battery has a large loss at low power, and can last for the longest time at 40%-60% power for a long time. If you don't use the iPhone for a while, please charge the battery to 50% before storing it.

3. After the new battery is charged, it will go to sleep after a period of time. At this time, if the capacity is lower than normal, the service time will be shortened. However, lithium batteries are easy to activate. After two or three normal charge and discharge cycles, the battery can be activated to restore normal capacity. If the battery capacity is very low, it can be fully charged for two and a half hours to three hours (sometimes it just shows full, but it is actually not full, which is why the battery capacity sometimes changes when the phone is restarted, and it will be fully charged for 20 minutes after 100% is displayed).

During normal use, you can charge the battery at will. Don't worry that downloading software from the computer often will reduce the battery life, because it has little effect on the charge and discharge cycle. Generally, it is best to charge about 30% or 40%. When the battery is low, it should be charged in time. Try not to use batteries within 10%. If there is, don't worry, just reduce the occurrence of this situation in the future.

Lithium batteries are not only afraid of low power, but also afraid of overheating, especially when charging. When the charge is 0-90%, the battery will charge quickly, and then the battery will heat up. Finally, 10% will be charged in a trickle. At this time, the current is very low, and the temperature of the battery will gradually decrease. Everyone can feel that the battery will be much better when charging, so it is recommended that you don't run a heavy load program when charging. Generally, don't spend too much time answering the phone, texting and surfing the Internet with wifi. It would be much better if the temperature of the machine was not very high.

6. There is no harm in charging all night, because the charger will cut off the current after it is full, and it will not cause overcharging. When the mobile phone is not in use, the standby current is very small, but it is still discharging, so when I get up in the morning and unplug the data cable, I see that the power is 100%, but it is completely durable without charging for three hours.

In addition, there will be a small current when the charger is empty. In order to protect the environment and avoid unnecessary waste, you can unplug the charger after it is fully charged. Some power-saving settings of iPhone Knowing the usage information of iPhone will help you to better manage the battery life.

To view the usage statistics of iPhone, please go to Settings > General > Usage, and under Statistics of Time after Last Charge: Usage Time: the time when iPhone was awakened and used since last charge.

When you unlock the screen, the iPhone is awake. Standby time: the startup time of the iPhone since it was fully charged last time, including the time when the phone was asleep.

The first time you use your mobile phone, you need to charge it to 100% to display the data here. Don't charge it halfway after it is full. The data shown here is valid and can be used as a reference. In most cases, the optimized mobile phone can be used for 6-8 hours, standby for more than ten hours, and the battery is in good condition.

You don't have to worry about how much electricity you need to stand by for one night, such as 1%, because there are many factors, such as system version, system settings, software, sim card and signal, charging situation, battery power and so on. , are within the normal range. The simplest and most effective way is to turn off the percentage display of electricity, so there won't be so much trouble. The following is my personal system settings, you can refer to 1, try to use wifi, and use 3G less. 3G consumes a lot of power, so mobile phones will be very hot.

2. Setup-Notification Center. In addition to system programs and chat software, other software choose to turn off notifications. 3. General-about this machine-diagnosis and dosage, choose not to send.

4, general-Siri, turn it off. 5, general-background application refresh, all closed.

6. General-date and time, turn off the automatic setting, and manually select Beijing as the time zone. 7. Set the wallpaper and brightness, turn off the automatic brightness level, and choose the brightness that suits you as needed. You adjust it to one-fifth during the day and directly to the lowest at night.

8.Set-password has nothing to do with power saving, but it is very useful. If you need a password, you can choose one hour or four hours, that is to say, how long you wait, you need to enter the password when you open the screen, and you don't need to unlock it all the time, which brings inconvenience to yourself. 9. Settings-Privacy, location service is turned on, and only necessary programs, such as maps, are allowed to run.

All system services can be shut down without any impact. 10, set -icloud, open the address book, memo, find my iphone, and everything else can be closed. Online backup of photos is very slow, so it is recommended to synchronize to the computer.

Cloud backup in storage and backup is also closed, and it is often annoying to prompt. 1 1, set -itunes store and app store. It is recommended to turn off automatic downloading and the use of cellular mobile data. This will not affect the manual download in the store.

12, on the desktop, the camera, weather, compass and stock market can be opened and positioned as needed. Others are the default settings. It is best to restore all the settings in Settings-General-Restore, and then reset them.

4.4. What are the precautions for iPhone charging?

As long as you pay attention to and follow some common-sense guidelines, you can extend the battery life and life of your iPhone. Most importantly, avoid placing the iPhone in the sun or in a hot car (even in a glove box). Heat is the simplest way to reduce battery efficiency.

IPhone temperature band. The working temperature of iPhone is between 0℃ and 35℃, and the suitable temperature for storing iPhone is between -20℃ and 45℃ ... Try to keep your iPhone close to room temperature (22℃), which is the most ideal state.

View usage statistics. Knowing how you use the iPhone and how long your battery usually lasts will help to extend battery life.

By clicking the "Settings" icon on the home screen and selecting "General" >; ; "Usage", you can view your iPhone usage statistics. Under "Usage Time after Last Full Charge", you will see two items:

Usage time: The total time that iPhone has been awake and used since it was fully charged last time. When you are on the phone, using e-mail, listening to music, browsing the web or sending and receiving short messages, or when your mobile phone is performing background tasks such as automatically checking e-mail, the iPhone is awake.

Standby time: the total startup time of iPhone since it was fully charged last time, including the time when iPhone slept.

As shown in the figure below.

Matters needing attention in charging

Let it breathe freely. If the protective cover is not removed when the iPhone is charging, it will generate too much heat and affect the battery capacity. If you find that the temperature of iPhone is too high when charging, please take off its protective case. In addition, when charging, pay attention to places that are easy to dissipate heat and ventilation, such as on a table instead of a bed.

Use iPhone frequently. If you want to properly maintain a lithium battery, you must occasionally keep the electrons flowing in it. Please make sure to charge the battery at least once a month (fully charge the battery and then use it completely).

Use the computer to charge the iPhone. When charging the iPhone with the computer's USB, please make sure that the computer is turned on. If the iPhone is connected to a computer that is turned off or asleep, the battery of the iPhone may be exhausted.

Chargers are mixed. Apple's technical support area in official website clearly stated that the iPad USB power adapter is a 10W charger. Although this iPad 10W USB power adapter is designed for iPad, you can still charge all iPhone and iPod models through it.

5. How to maintain the battery of Apple mobile phone?

Charging on time doesn't mean charging your mobile phone and turning it off naturally. The lithium polymer battery used for iPhone does not say that it can protect the battery by using natural shutdown and charging. This statement is only suitable for the era of nickel-cadmium batteries. Excessive discharge of lithium battery will lead to the decrease of ionic activity, capacity and service life. It's best to charge when the power is more than 20%.

It is best not to play with your mobile phone when charging. When Apple's mobile phone is charged, the current is divided into two ways, one is responsible for charging the battery and the other is responsible for the normal operation of the mobile phone. There is a sentence in the manual of Apple's mobile phone "Keep the battery at or near room temperature when charging". If you charge your mobile phone while playing, it may cause the temperature of the mobile phone to rise, which will do great harm to the battery; In addition, it is not recommended that the mobile phone case is too tight, which will hinder the heat dissipation of the machine.

6. How much is the best charge for Apple's mobile phone?

1. In daily use, it is best not to use automatic shutdown for Apple phones. Instead, it is best to charge the mobile phone when the battery is 20%-40%, and you can unplug it when it is full.

2. Early mobile phones used Ni-Cd batteries and Ni-MH batteries, which needed similar "activation". These batteries will have a "memory effect" When they are charged under incomplete discharge, they are easily overcharged. After a long time, users will feel that the power is running out, so it takes 12 hours to fully charge for the first time, and it is best to recharge when there is no power.

3. The battery used on 3.iphone is lithium-ion battery. Its initialization process has been completed at the time of manufacture, so it does not need to be activated when it is used. Lithium batteries also have no memory effect and can be charged at any time. If the mobile phone is turned off automatically, the internal voltage of the lithium battery will be too low due to excessive discharge, and it may not be able to start and charge. Therefore, lithium battery charging pays attention to "eat less and eat more meals", and frequent shallow charging and discharging is more helpful to prolong its life.

7.7. What are the tips for charging 7.7.iPhone 6?

2. Plug in the data cable first, and then plug in the socket.

First plug the data cable into the iPhone6 charging interface, and then plug the two-hole plug into the socket. It takes about 4 hours to fill the remaining 10% for the first time. The suitable temperature of the environment during charging is 10 -35 degrees. /kloc-charging below 0/0 degrees is slow! The ambient temperature exceeding 35 degrees will seriously reduce the effective capacity of the battery and cause irreparable damage.

3. Judge whether the battery is fully charged after shutdown.

How to judge whether it is full when charging is turned off? Press the home button, and a large battery icon will appear in the center of the screen. When there is no white lightning sign under the battery, it is completely full! When charging, it is a large battery, and there is a white lightning sign below the icon, indicating that it is charging. For the sake of equipment safety, another suggestion is to disconnect the charger in time after it is fully charged. It's no use charging more!

4. Don't unplug the battery after it is fully charged.

When fully charged, do not unplug the data cable or plug at this time! ! Then press and hold the power button normally for a short time, and a charging state diagram will appear quickly on the screen, and then a white iPhone logo will appear until it is turned on normally.

5. Fully charged and discharged after one month.

Use it once a month or so to charge it once! The battery can be automatically turned off, and then turned off and fully charged at one time. It is recommended not to charge while playing games when you start charging, which is not good for the battery.

6. Periodic charging and discharging

In order to keep the battery charged normally, please make sure to charge it at least once a month, that is, fully charge the battery, and then use it completely. You only need to charge and discharge the iphone6 once a month or so.

8. How to protect the battery of Apple mobile phone?

1, iPhone uses a lithium polymer battery, which has no memory effect, so it is completely unnecessary to charge and discharge every time (just charge it if you want).

2. After each charge and discharge cycle, the power of lithium battery will decrease a little, and it will decrease to 80% after 400 times of charge and discharge. The so-called one-time charge-discharge cycle refers to complete charge-discharge, that is to say, if you use 20% of electricity, you will be fully charged, and it will take five times to calculate a charge-discharge cycle.

3. Because there is a chip in the battery to calculate the amount of electricity, in order to calibrate, a complete heavy discharge should be done once a month (that is, no electricity is needed when it is fully charged). 4. As long as you use Apple's official power supply, it will become a direct power supply mode after being fully charged, and there is no overcharge problem.

5. The charging process of lithium battery is that the first 80% can be completed by fast charging for 2 hours and the last 20% can be completed by continuous charging for 2 hours. This is normal, there is no need to do anything special.

So to sum up, the battery maintenance of iPhone is very simple. In addition to the following precautions for saving electricity, you only need to calibrate once a month, and try to use the power connection (such as in the office), so there are no other precautions. What should be prevented from being overcharged and always charged (or never charged) should be misunderstood.

IPhone power-saving skills 1 and 3G are the most power-consuming, so the reason why iPhone 3GS can use 1 day or more is that 3G function is hardly used, and the power consumption of using 3G function is twice that of playing games and surfing the Internet with wifi, and three times that of making phone calls. 2. When it is not needed, try to turn off the push and the software regularly check the network function.

3. Turn off one or more Bluetooth functions of 3GWifi when not needed. 4. Internet search consumes a lot of power. Please turn off the 3G function in areas with unstable 3G signals and adjust to flight mode in areas with unstable telephone signals.

5.GPS consumes a lot of power, so don't start the software with GPS function. 6. Starting the equalizer while listening to songs will increase power consumption. You can turn it off if you don't need it.

Supplement: Lithium battery is afraid of heat, so try not to let it work above 35 degrees. Especially don't charge in this case, otherwise it will quickly reduce the battery power.

Therefore, when you are in the car, you should avoid staying in the car or directly exposing yourself to the sun in summer. If your iPhone has started to burn, please turn it off and cool before recharging.

In addition, it is suggested to charge and discharge once a month in order to calibrate the control chip on the battery, instead of amplifying the power like the nickel-hydrogen battery.