Is it better to have a custom-made wardrobe or to hire a craftsman? If so, where can I find a craftsman?

Of course it is better if the wardrobe is customized.

Generally, those made by hand are rough and not professionally customized.

The process of customizing a wardrobe is different from that made by master workers.

Customized wardrobe installation service process

1) Contact: Since receiving the order, contact the customer as soon as possible to confirm the on-site installation time (phone, text message), and inquire whether the customer has the equipment on site Installation conditions, have the product goods been received, etc.? And confirm the specific detailed address and room number of the customer's home to avoid errors in the drawings and service department information.

2) Preparation: The installation master will describe the site conditions and drawings according to the customer's phone call, prepare the required tools and consumables, and provide door-to-door service.

3) Door-to-door: The installation master will come to the customer’s door on time according to the time agreed with the customer the day before, arrive at the customer’s door 10 minutes in advance, ring the doorbell or knock on the door, wait for the customer to open the door, say hello to the customer, confirm customer information, Submit your business card, show your work badge, introduce your identity and purpose of visit, and provide services.

4) Preparation before work: Lay the work floor mat to protect all exposed floors in the customer's home from damage. After the floor is laid, arrange the tools and lay them flat on the floor, and pick them up when needed.

5) Material inventory: Use paper pads to protect the floor. Products are inventoried and classified according to the inventory. Use sponge cushions when stacking panels against the wall. Pay attention to whether the number of product coded pieces is correct. If the goods are missing, lost, or damaged, the installation master will record them immediately and provide feedback to the customer service staff.

6) Product classification:

6.1 Compare the installation drawings and distribution lists to count and classify the stacked goods; if necessary, open the packaging cartons and protective films to classify the goods ( The protective film can be used to protect door panels or hardware accessories such as drawers and baskets)?jiaju63.com

6.2?The goods are classified into: cabinet sets, door panel sets, top cabinet sets, and hardware accessories sets. ?jiaju63.com

6.3 Do not open the outer packaging when the door panel is not installed to avoid collision or scratching; the desk or computer table and bed set should be placed as close to the wall as possible before installation to prevent breakage. When placing it against a wall, use a protective film pad between the walls to protect the wall from getting dirty or scratched.

6.4 The inventory of hardware accessories should be concentrated in the corners as much as possible, and stored together in hardware boxes. They need to be packed in special boxes or cartons and placed in the installation handle. Hardware accessories should not be scattered. Place in a cabinet or on the floor. Avoid missing accessories and cluttering the site during the installation process;

7) Drawing review: Measure on-site according to the drawings, and confirm with the user the special conditions on site, whether the installation conditions are met and other impacts.

Customized wardrobe installation process

8) Construction survey: Check the customer’s original facilities and equipment at the installation site (such as floors, floor tiles, wall tiles, suspended ceilings, chandeliers, doors and windows, etc. ) to conduct inspection. If any abnormality is found, immediately take photos and record the situation. At the same time, confirm the on-site situation with the customer, and ask the customer to confirm the signature before delaying the work.

9) Product unpacking:

9.1 For wooden frame packaging, do not use a hammer to directly hit the outer paper packaging, and pay attention to the direction of the outer frame to avoid damaging the internal products;

9.2 Thoroughly remove the dismantled outer box and iron wire, nails, wood chips and other debris to avoid damaging the product, customer's floor, wall, etc.;

9.3 Unpack the paper When packaging, use a blade to remove it along the direction of the tape. It is strictly forbidden to tear it at will;

9.4 Place it according to the installation sequence: you need to install the panels first and put the accessories in front, and then install the panels. Place them toward the back, with the door panels placed together in a neat and orderly manner;

9.5 If the product needs to be placed against a wall, floor, etc., it must be protected with paper or pearl cotton to avoid damage to the product, wall, etc. The surface and floor are damaged;

9.6 During the unpacking process, if it is found that the product has missing holes, grooves, milling, etc. during the production process, the installation master will immediately take photos and records and report to the Customer Reporting Department. If possible, On-site processing, try to solve it on-site.

10) Assembly: During assembly, the customer's floor, walls, door frames, etc. must be protected before assembly. If there is a slight hole position deviation during the assembly process, the master will handle it on site. If the product structure, color, etc. are inconsistent with the drawings, immediately take photos and records and provide feedback to the customer service center.

11) Installation details:

11.1 During the installation process, garbage and dust should be cleaned at any time and should not be left until the final cleaning. Keep the installation environment clean and tidy at all times.

11.2 During the installation process, do not step on the product or the customer's belongings. Use special ladders and stools.

11.3 During the installation process, hardware accessories and tools should be stored in special boxes or cartons and should not be thrown away randomly.

12) Self-inspection: After the installation is completed, the installer will conduct on-site self-inspection and handle the details of the cabinet (three-in-one caps, screw caps, label processing, etc.).

13). Cleaning: After the details are processed, the installation service personnel shall clean the construction site and the inside of the cabinet. If the hands are dust-free, it will be considered qualified. There should be no extra accessories or garbage in the cabinet.

14). Take photos for acceptance and file them: After the installation is completed, let the customer check and accept it. During the customer's acceptance, the problems raised will be dealt with and adjusted in a timely manner. If the problem cannot be handled on site, detailed records will be made so that the customer can confirm their acceptance and take photos on site for storage. . (Photography requirements: overall renderings, internal structure drawings, detailed drawings)

15) Farewell words: Mr. XX/Ms. XX, thank you very much for your cooperation. If you have any questions in the future, please feel free to contact us at any time. Goodbye !

16) Follow-up: For problems left on site, the installation master carefully reports and fills in the feedback information of the installation problem. The problem feedback is clear and the dimensions are clearly filled in. The customer service center will be transferred to the customer service center immediately, and the customer service staff will optimize the feedback again. Work as a contact person for each brand to handle board repairs and parts follow-up.

It can be seen from the above that the process of professional custom wardrobe installation is definitely beyond the reach of ordinary workers.

For professional customized wardrobe installation, you can find left- and right-hand furniture installation platforms.