(High score, come here!!) How to flash Dopod s1 Elite Edition

Flashing is risky. In order to prevent your phone from becoming a brick, novices are advised to read this tutorial carefully. The first step is to unlock the phone first. Unlocking is a necessary prerequisite for modifying the ROM of every WM phone. Only You can only update the new ROM after unlocking it! Pay attention to the power of your mobile phone and try to keep it around 70%. Let’s start: first check whether your mobile phone and PC have been synchronized normally. After synchronization, the icon of the Microsoft ActiveSync synchronization software in the lower right corner of the computer will change. Turns green. Then open elf-uspl.exe and press Enter [a progress bar will appear. Press Enter and the progress of STEP 2/3 will appear. The phone will automatically switch to flash mode. The phone will display a white screen and the synchronization will be disconnected. .The picture appears and then press Enter. After the picture is displayed, click NEXT. The picture appears. Make the groove again. Click NEXT. The picture appears. Then click UPDAT to continue. Click NEXT to continue. Click NEXT. The progress bar displays to 100%. The phone automatically restarts! Click FINISH! The phone is unlocked successfully. ! The second step is to flash the ROM. After unlocking it, we can flash the ROM. Most of the current ROMs are in NBH format. We can put the NBH ROM into the tool kit. RUU flash tool kit: put the good ROM into RUU tool package. Then run the ROMUpdateUtility.exe program in it. Then a dialog box will appear. Check the boxes you want to check, and then click NEXT. When 100% appears, the phone will automatically enter the 3-color screen. The progress is displayed on the phone screen and everything is normal! Unlock the enhanced version: 1. First unzip the RAPI compressed package. There are 2 CAB files in it. Install it on the mobile phone. First install Cert_SPCS.cab, then install EnableRapi.cab2. Then unzip the ELF_USPL compressed package. Run elf-uspl.exe on the PC and a pop-up will appear. CMD prompt, follow the steps below and press Enter. If step 3 fails, poke the PP and do steps 1 and 2 again. If step 3 is successfully passed, restart EC TOUCH, a three-color screen will appear, and you can flash the phone. Flashing the ROM is basically the same as the regular version. Let me share the experience of machine friend kennylu for your reference. The day before yesterday, yesterday and today, I struggled countless times. Now it is finally relatively stable. I have a lot to say and tell everyone. First of all, I want to say that there is a risk of rooting the phone. However, the flashing tutorial is too simple, so I will make some additions here! After reading this, you can safely flash your phone. 1. Unlock it first. Make sure that the mobile phone is correctly connected to the computer and that the computer's activesync program displays correct synchronization, that is, the activesync logo in the lower right corner of the computer displays green. It cannot be unlocked under the three-color screen. Unlocking will fail, and the only criterion for failure or success (remember, the only criterion!!!) is to enter the three-color screen to check the SPL value. The three-color screen displays IPL (Initial Program Loader) and SPL (Second Program Loader). IPL cannot be changed. If you change the phone, it will be a real brick, and the motherboard will be burned out. The higher the SPL, the higher the limit of your mobile phone's ROM. Only when the SPL is 1.11 can it reach the limit of changing the ROM, that is, flashing the machine. The spl value must be 1.11.0000 to indicate that the unlocking is successful. Other values ????mean that there is a problem with the unlocking and the machine cannot be flashed, otherwise the flashing machine may be bricked. If you fail, try again and again, and you will succeed one time. It took me 5 attempts before I succeeded. Several common situations will occur after successful unlocking: 1. No changes. 2. It can boot normally, but the program memory shows an error, and the memory of the enhanced version becomes smaller. 3. Unable to boot, temporary brick state. So again, if you don’t want to flash your phone, please don’t unlock it and play. Note: When the camera is turned off, press and hold the camera button and then press the power button at the same time. Press and hold both at the same time and wait for a few seconds to enter the three-color screen. After checking and confirming that the SPL value is correct, you can flash the phone. 2. Flash the machine. You can flash the machine with a three-color screen or a normal connection. Make sure the battery is above 50% and there will be no sudden power outage at home. (Otherwise the phone will become a brick). The flashing tool kit should eventually contain 9 files, one of which is the .NBH file, which is the content of the ROM. All remaining .NBH files should be deleted, leaving only one .NBH file for the ROM you want to flash.

I have provided you with a flashing toolkit. If you download the .NBH file ROM, just copy this file to this RUU flashing toolkit. Flashing is very fast and only takes 3 to 5 minutes to complete. After completion, you can perform a hard reboot to ensure that the phone is in perfect condition. There are two methods for hard restart: 1. Enter Settings - System - Clear Memory and enter 1234. 2. In the power-off state, press and hold the 4 buttons including the phone call button, the phone hang-up button, the camera button and the power button for about 5 seconds, and the screen will prompt. At this time, click the confirmation button in the middle of the 5-dimensional navigation button. For reference only.