How to set up Tianyi 4G Cat (CPE)?

1. After turning on the CPE, connect the computer to the CPE through the network cable.

2. Set the IP address of the computer to192.168.1.x (x is any number of 1-253) and set the subnet mask to 255.255.255.0.

3. Enter "192.168.1.254" in IE browser, and then enter CPE user name and password (default user name: admin, password: password) in the pop-up window.

4. After logging in to CPE, click the "Operation Mode" link in the directory on the left, select "Bridging Mode" and click the "Apply" button.

5. Click the "Site Scan" link under the "Wireless" folder in the directory on the left, select the "China Mobile-EDU" SSID with the smallest signal value, and then click the "Connect" button.

6. After the connection is successful, click the "Exit" link, and then click the "Apply" button to exit, so that the CPE setting is completed.

7. Change the IP address of the computer to automatic collection.

8. After obtaining the IP address, enter any URL in IE browser, and the authentication page will pop up. After entering the user name and password, you can browse the network.

Note: The above steps of 1-6 only need to be set once, and the CPE can access the Internet after it is powered on. Please refer to step 7.