How to install win 10iso system with pe

Pe is the pre-installed environment of windows, and it is very powerful. Mainly used to maintain the system, such as partitioning the computer and installing the system. Almost all windows systems can be installed under pe, including the latest win 10 system. It is very convenient to install win 10iso system directly. So how to install win 10iso system with pe? In fact, the installation steps are very simple. Next, Bian Xiao will tell you.

Related installation tutorial: detailed tutorial of micro-pe installation win 10 (uefi mode, supporting pictures larger than 4G)

Installation instructions:

1, pe Installing win 10iso will erase the data of drive C. If there is data on drive C and the desktop, you must back it up first.

2. If the memory is 3G or below, install win 1032 bit, and if the memory is 4G or above, install win 1064 bit system.

I. Tools needed

1, system iso file download: win 10 professional version download.

2. Prepare an 8G USB flash drive: How to make a USB flash drive for Chinese cabbage?

3. USB flash drive startup settings: How to set startup from USB flash drive?

Second, install the official iso system: winpe installs the original win 10 steps.

Three. The steps of installing win 10iso in pe system are as follows.

1. After the startup disk is completed, copy the downloaded win 10iso file directly to the GHO directory of the USB disk startup disk;

2. Insert the U disk boot disk into the computer that needs to install win 10. After restarting, continue to press F 12, F 1 1, Esc and other shortcut keys to open the startup menu, select the U disk option, and press enter. If there is no response by pressing these keys, you can check the tutorial "U disk startup settings" above to see the hot keys of your own brand computer.

3. Start from the USB flash drive and enter the installation menu, and select 02 Enter through the up and down arrow keys. If option 03 cannot be entered, start the pe system;

4. After entering the pe system, if you need to partition again, you need to back up all the files on the hard disk, then open the DG partition tool and right-click the hard disk to select quick partition;

5. Set the number and size of partitions. The system disk should be above 35G, and it is recommended to be above 50G. If it is a solid state drive, check "Align the partition to an integer multiple of this sector", and the default 2048 sector will be 4k aligned. Click OK to perform the partition process.

6. Double-click to open the cabbage one-button loader, and select win 10iso image as the image path. At this time, the tool will automatically extract the gho file, click the drop-down box and select the win 10.gho file;

7. Click "Recovery Partition" and select the installation location, usually drive C. You can select the installation drive letter according to "volume label" or disk size, and then click OK.

8. A prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to start the system restoration process;

9. Jump to this interface and perform the operation of extracting system driver C of win 10. This process needs to wait for 5- 10 minutes until the progress bar ends.

10. After decompression, the computer will automatically restart. At this time, pull out the USB flash drive, restart and enter this interface to install and configure the win 10iso system;

1 1. Finally, boot into the desktop of win 10 system, and the process of installing win 10iso file under pe is over.

This is how to install win 10iso system with pe. Just make a pe startup disk and install win 10iso according to the above steps.