What does the satellite set-top box show as 000?

The satellite set-top box displays 000, indicating that no signal can be received, and the angle of the outdoor satellite pot needs to be adjusted. The antenna needs to be placed outdoors, in an open place in the southwest, without any obstacles in front, otherwise it can't receive signals.

Users can check the signal strength by pressing the F 1 key first and then pressing OK. If there is no intensity, it is possible that the line between the tuner and the set-top box is not connected well. There is signal strength, but there is no signal quality, that is, the satellite antenna is not adjusted to the correct position, and the angle of the antenna needs to be adjusted.

Generally, after the green light is on, you can watch the program by turning on the set-top box. Sometimes the green light will prompt T02 error, so you can turn on the TV and check the signal quality value on the TV.

Press the F 1 key on the remote controller, and then press the "OK" key in the middle, and the values of signal strength and signal quality will be displayed. Continue to fine-tune the satellite pot, so that the value of signal quality reaches the highest, and the signal strength does not need to be concerned. When the signal quality reaches more than 70%, you can watch it normally.

Extended data

Satellite TV set-top box is a consumer electronic product that converts satellite digital TV signals into high-quality audio and video signals, allowing users to watch satellite TV programs on existing analog TVs for interactive digital entertainment, education and business activities.

The purchased set-top box can't see any programs without authorization. There are bar codes at the bottom of the set-top box, STB:* * * * and CA****, which are the ID card of the set-top box, the identification code and encryption code of the management system, and the smart card number 000 * * * * *.

In the management system, these three data need to match the model of the set-top box, and the user name and mobile phone number are complete before data can be entered. Mobile phone cards are mainly used to store information and send data to nearby base stations. When the system is compared and belongs to the legal installation place, it will receive data quickly and do a good job of card opening. The whole process takes about 3-5 minutes.

The latest generation (third generation) home set-top box adopts GPS positioning system and smart card double encryption, which can prevent cracking and cross-region, and protect regional sales and user rights. GPS is mainly used to locate the location where users watch, and the location method is the surrounding mobile signal base station, because China mobile phone is the most accurate.

Because the policy stipulates that no home connection should be installed in the cable TV coverage area, in order to protect the development of the cable TV department from damage and stabilize their development trend, it is necessary to control the set-top box and equipment to enter their scope, so positioning is necessary.

Baidu encyclopedia-satellite TV set-top box

Baidu encyclopedia-hukou tong