Apple 1 1 How to clear the mobile phone password by brushing the machine?

Iphone 1 1 If you want to brush your phone, you must first set it to the brush mode. Different versions of Apple enter the brush mode in different ways. Iphone 1 1 how to enter the brush mode? Bian Xiao will show you how to enter Apple 1 1.

space

Iphone 1 1 how to enter the brush mode?

IPhone 8/8P, iPhone X, iPhone XR/XS/XS MAX, iphone111/pro/1pro max enter the DFU mode in the same way. The specific operation steps are as follows.

1, turn off the Apple phone;

2. Connect with the USB interface of the computer through the data cable, and then open the latest iTunes tool installed on the computer to identify the device (the driver needs to be installed for the first connection);

3. Press and hold the power button+volume down button (down button) of iPhone for about 10 second at the same time;

4. When the screen remains black, release the power button and continue to press and hold the "Volume Down button" until the screen turns black, which means that the DFU mode has been successfully entered. Let go of the volume button.

Note: If you enter the interface without a black screen, but display the Apple LOGO, it means that you have not successfully entered the DFU mode. This situation may be that you have pressed the button for too long, so you can turn it off again and start again according to the above steps.

Generally speaking, after the iPhone enters DFU mode, the general iTunes tool will pop up a warning "Your iPhone has been detected", and then you can resume brushing, as shown below:

1, press and hold the Shift key (Windows) or the CMD key (Mac) on the computer keyboard;

2. Click "Restore iPhone ...", and then select the previously downloaded iOS firmware to refresh.

How to exit DFU mode

How to exit after entering DFU mode? The operation is simple, and the steps are as follows:

1, long press the power button, and then press and hold 10 seconds or so;

2. When you hear the computer click or see a white apple (Logo) on the iPhone screen, release the power button and wait for normal startup.

The above is the method for iPhone 8 and above to enter and exit DFU mode, which is applicable to iPhone 8, X, XS, XS MAX and the new generation iPhone 1 1 series.

The above is how the iphone 1 1 brought by Bian Xiao enters the brush mode, and how the Apple 1 1 enters the brush mode. I hope you like it.