How to open the safe? What should I do if I forget the security password?

Many people keep some emergency cash, precious jewels and important documents at home. Some people will find a secret place to hide these things, while others choose to put them in a safe. When using the safe, people are most concerned about how to open it. What if I can't open it? What should I do if I forget the security password? These are all things that people may encounter when using them. Today, Bian Xiao will talk to you about how to open the safe:

Safe unlocking principle:

The number lock on the safe is the key to unlock it. The common number lock has three groups of unlocking numbers, each group has two digits. There are three rotating disks (wheels) in the three groups of number locks, and each disk has a gap. According to a certain operation method, turn the digital dial (dial) left and right, so that three groups of numbers are respectively aligned with the marking lines on the outer ring of the digital dial. By driving the transmission device, the notches on the three disks can be aligned with the design positions, so that the beam driving the latch can fall into the notches of the three disks, and the door can be opened.

How to open the mechanical safe?

I. Opening method of mechanical password safe (assuming passwords are 80, 25 and 50)

1. Turn the password dial clockwise, so that the scale value "80" on the dial is aligned with the reference point on the dial, and then continue to turn it clockwise for three times, so that the number just now is aligned with the reference point.

2. After the first step, rotate the password disk counterclockwise again, and then rotate it counterclockwise until the second group of passwords "25" is aligned with the reference point.

3. On the basis of the above two steps, turn the password disk clockwise to align the third group of passwords "50" with the reference point.

4. After completing the above three steps, the password lock is already in the open state.

5. Insert the key into the lock hole and turn it 90 degrees clockwise. At this time, the big lock is also in the open state.

6. Open the handle: Turn the handle clockwise or counterclockwise to the limit position and open the door. (The key is that the second password is reversed more than 1 less than 2 times, and it must be correct every time.

Note: If you see the numbers once, if the last number on each dial is turned, you must start from the beginning, and you can't look back.

Second, simple memory method.

1, turn right three times or more, aim at the first password to stop.

2. Turn left twice, that is, on the basis of the first password, the second number will stop after turning left twice.

3. Turn right and aim at the third password, that is, stop when you see the third password.

Remember: cis-trans-cis, 3,2, 1 Then insert the key and turn it to open it.

What if the safe can't be opened?

1. What if the electronic safe can't be opened?

Open the door with master key and emergency key. There is a reset key in it. News:

1? Enter a new password and press #;

2? Restore the factory password. # Factory password # * New password #? Please enter them in turn.

If you can't open the safe after trying this method, you can also use the following emergency opening methods:

When the electronic password system can't work normally, use the emergency power box plug (or similar thin stick) to push the small hole directly below the panel, push the emergency lock cover in the panel away, insert the emergency lock key, turn the emergency key counterclockwise to open the electronic lock, and then use the door lock to open it normally.

Second, what if the mechanical safe can't be opened?

Unlike electronic safes, mechanical safes can reset passwords, so they can only call the factory of the safe to check the original records.

What should I do if I forget my password?

1. First of all, you can use the emergency key: because every safe is equipped with an emergency key when it is sold, that is, you can open the safe with the master key when you forget the password.

2. Contact the safe seller or directly contact the technical department of the production enterprise for help. Some safes can reset the password through the original password.

3. If it really doesn't work, go to a regular unlocking company (it must be filed with the police) for help.

4. If the above method can't open the safe, you can only destroy the box and unlock it.

Here is information about how to open the safe. The most troublesome thing about the safe is forgetting the password, but it is also a problem that many people will make, so everyone should know how to open the safe at home if they forget the password, so that they can quickly retrieve the password and open the safe in case they forget the password one day.

The above is about opening the safe, I hope it will help everyone!

Tubatu Online provides you with "each decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8 to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~