What regulations should be met for erection and removal of protective shed?

When erecting and dismantling protective shed, the following requirements shall be met:

1, demolition work must be carried out layer by layer from top to bottom, and simultaneous operation is strictly prohibited.

2, even the wall pieces must be dismantled step by step with the scaffold, it is strictly prohibited to dismantle the whole layer or several layers of even the wall pieces before dismantling the scaffold; The elevation difference of sectional demolition shall not exceed two steps. If the height difference is greater than 2 steps, even wall pieces should be added for reinforcement.

3. When the scaffold is lowered to the bottom of the last long pole, temporary support shall be set in the appropriate position for reinforcement, and then the wall pieces shall be removed; When the scaffold is dismantled in sections and facets, both ends of the scaffold that will not be dismantled should be reinforced with wall pieces and cross braces as required.

Extended data:

Scope of application of protective shed:

Protective sheds are mainly used in construction sites, such as distribution boxes, steel bars, elevators, carpenters, mixers, etc. This is a protective safety measure on the construction site.

The specific installation procedures are as follows:

Concrete floor → anchor steel pipe → sweeping pole → peripheral vertical pole → longitudinal horizontal pole → horizontal horizontal pole → laying the first layer of bamboo basketry → roofing steel pipe → horizontal horizontal pole → laying the second layer of bamboo basketry → protective railing → surrounding bamboo basketry.

Baidu encyclopedia-protection shed