Five articles on internship summary and experience selection

The training consists of hands-on skills training and psychological skills training. Including comprehensive quality requirements (entrepreneurial ability and employability are collectively referred to as cross-post ability) training. The following is my training summary and experience, hoping to help you!

Training summary and experience 1

In practice, I strictly follow the training procedures. As a fledgling college student, I will not relax my demands on myself. I hope to treat every task in the future with my original enthusiasm for learning. During this training period, although I often feel bitter and tired, I have fun in suffering and I have fun in being tired, and I have also shown great efforts and seriousness. The main content of this training is machine maintenance, but I have benefited a lot and felt a lot. What impressed me the most is as follows:

First of all, training is a test of an individual's comprehensive ability. In order to finish the work well, besides having profound basic knowledge of office, you need to have certain practical ability, operational ability, ability to deal with unexpected faults, and be proficient in common office software. As a staff member, I also need to have strong expressive skills, and be good at guiding myself to think and adjusting the atmosphere of getting along with others. In addition, you must have strong adaptability, organizational management ability and strong perseverance.

Secondly, this training, I deeply realized the importance of accumulating knowledge. As the saying goes: give students a bowl of water, they have to have a bucket of water. This sentence touched me deeply. Office, I used to think it was easy to operate, but when my master asked me to complete a product statistics data and record, I was at a loss and felt completely different from what I usually learned in computer class, which also made me feel very ashamed. Because I always thought that learning these things well had little to do with my major, but I didn't know that my job was not to specialize in one aspect, but to examine our comprehensive knowledge level. This internship has enhanced my confidence and courage in graduation and employment.

Training summary and experience II

How time flies! In the blink of an eye, a week's training life has quietly passed, but the training process is still vivid.

During the training, I learned a lot, which not only gave me a new understanding of VB programming in theory, but also improved my practical ability. I really put what I have learned into practice and learned a lot about being a man, which benefited me a lot. I personally felt the combination of theory and practice, which opened my eyes. It is also a preliminary test of what you have learned before! This training really benefited me in my future study and job hunting. I believe these valuable experiences will become an important cornerstone of my future success in a short week.

As a sophomore, after nearly a year and a half of study in school, I have a rational understanding and understanding of programming. I have been busy studying theoretical knowledge at school, and I have no opportunity or corresponding experience to participate in the design and development of the project. So before training, programming is abstract to me, and I don't know how to complete a complete program.

The project I am doing this time is personnel management system, including login, employee database, attendance database, salary database, business information and so on. At the beginning of the training, only a few simple interfaces were made, which is actually relatively simple. On the third day, the basic part of the code has been written, but there are many problems in the debugging process. In addition, sometimes due to thoughtlessness and carelessness, there will be big mistakes in the code. The teacher taught us many simple and practical skills. This also makes us realize that if we want to complete a module comprehensively and completely, we must first design a program, comprehensively analyze what will be used and consider possible situations. Therefore, under the guidance of the teacher, the problem has been solved smoothly.

There are many shortcomings in the programming of this program, and some functions may be incomplete or imperfect, but I think I have done it seriously and learned a lot from it. In the future, I will make up for my lack of knowledge points, learn to draw inferences from others and learn to master them. The most important thing is to get rid of careless and thoughtless habits. I think I will improve this program in the future and try to apply it to my life.

During the training period, it brought me not only an experience, but also a fortune in my life. As the saying goes, what you get on paper is always shallow. Learning without applying theory to practice is not profound. Nowadays, college education is based on theory, and it is beneficial for me to have the opportunity to practice. I will graduate soon and go to the society. I believe this internship will help me to take part in the work in the future.

Although the hardships and smiles along the way have gained something, what we have learned is only the beginning. New tests and choices must be constantly struggled and honed. Please don't let our young time leave too many regrets!

Training summary and experience 3

The engineering geological training lasted for one and a half days, and three stations were always observed. However, due to the heavy rain before training, we finally went to two stops. One is a dense cave, and the other is the Conghua fault zone.

On June 27th, after the teacher told us some matters needing attention when going out in the morning, we packed our bags and set off for the first stop of our investigation-Mishidong. First of all, the teacher explained the content of this practical activity and put forward four questions, so that we can carry out this practical activity purposefully. These four questions are:

1. Which of the three rock classifications does the rock here belong to?

Second, what rocks are there here?

3. Why are the rocks here so broken?

4. What is the weathering degree of the rocks here?

With questions, we observe the rocks here. It is found that the rocks here are mainly shale and sandstone, and a few are magmatic rocks, but the rocks here are layered rocks. Because there are a lot of shale and sandstone in the rocks here, these two kinds of rocks are typical rocks in layered rocks. After the teacher's final summary, we learned that the rocks here are layered rocks, not only because of its massive distribution of shale and sandstone, but also because of its bedding, which tells us that the rocks here are layered rocks.

Sandstone: more than 50% of the grain size is 0. 074~2mm sand cementation. According to grain size, it can be divided into coarse-grained, medium-grained, fine-grained and silty sandstone; According to its main detrital composition, it can be divided into timely sandstone, feldspathic sandstone and lithic sandstone. , sandy structure and bedding structure. We found more sandstone siltstone and feldspathic sandstone here. As the name implies, the texture of shale is like a page of homework paper, which will become like this under strong pressure.

Because the place we observed this time is next to a newly-built expressway, which was dug out of the mountains, all those rocks are exposed. During this period, there was plenty of rain. Under the exposure of the scorching sun, the rocks near the vegetation have turned into soil and completely weathered. From top to bottom, the weathering degree of rocks is getting lower and lower, only slightly weathered near the foundation. The reason why the rock is so broken is because of the activity of the rock stratum, the action of internal stress and external stress, and also because the integrity of the rock stratum was destroyed shortly after construction.

Finally, we also measured the incidence, but due to operational reasons, our data are biased and cannot be recorded as experimental data.

On June 29th, we went to the second stop-Conghua Fault Zone for observation. This time, the problem is similar to last time. The rocks here are three types of metamorphic rocks, including mylonite and rhyolite. There are also magmatic rocks distributed in it, and we found that rocks similar to shale are also distributed in it, and later it was known that it was schist.

Because there was a lot of rain during this period, the rocks there were badly eroded by the rain, which were lightly smashed with a hammer, while the rhyolite was severely kneaded into mud by hand, so we basically broke the samples by hand this time. Most of the rocks here are severely weathered, and they are seriously damaged by rain erosion, which affects our observation.

It is located in the Conghua fault zone, where the crustal activity is intense, the rock strata change greatly, and man-made destruction, so the rocks there can not be used by crushing, but become mud and sediments. Next to the battlefield, the raw materials are the rocks there. After returning to school, we observed the rocks beside the school path, which were limestone. The magic of nature makes these ordinary rocks elegant and become a beautiful scenery in our school.

The training time is not long, and I don't know enough about geology. However, we are majoring in road and bridge, so we don't have to learn as thoroughly as environmental geology. We just have a basic understanding of the proportion of geology in our road and bridge construction, which is the basic part. When I went out, I paid attention to the components of the expressway. After the road is completed, the roadside should be protected to reduce the probability of landslide accidents, which is related to the geological process.

Through this training and the last survey training, I understand the difficulty of our road and bridge major. It is not only limited to building roads and bridges, but also learning how to coordinate with nature and make way for repairing and building bridges while minimizing the damage to the environment. This geological training has also brought us closer to nature, allowing us to see the scenery that we have not seen or noticed at ordinary times, and to see the wonders of nature and the beautiful scenery in the rocks.

Training summary and experience 4

Electronic and electrician training is an important practical teaching link in vocational education. Through practical training, let everyone know the basic knowledge of manual soldering and radio, so that everyone can master welding tools, requirements and methods, welding methods in modern electronic technology, reading, testing and use of common electronic components, and the basic working principle and maintenance methods of radio. Let us know the working characteristics and simple maintenance methods of electronic products, and cultivate our professional skills in obtaining electronic assembly technology. By studying basic theory, learning to use basic knowledge, training basic skills and enhancing practical ability, it is of great significance to cultivate applied undergraduate talents.

I. Main contents of training:

1, manual welding practice

The essentials of welding technology can be summarized by "five steps": welding preparation, welding piece heating, solder melting, solder removal and soldering iron removal.

Before soldering, we should remove the oxide layer on the surface of the component and bend the pins of the component. The left hand uses tweezers to cling to the body of the resistor and clamp the pin of the component, so that there is a gap of more than two millimeters between the bent part of the pin and the body of the component. Due to the large distance between mounting holes, some components should be bent and shaped according to the corresponding hole spacing on the circuit board.

Manual welding practice is mainly about the use of electric soldering iron. Before using the soldering iron, it must be noted that the plug of the soldering iron must be plugged into the right-hand socket, not the left-hand socket. If you are left-handed, put it in your left hand. Before electrifying the electric soldering iron, straighten the wire of the electric soldering iron first, and check whether the insulation layer of the wire is damaged, so as not to entangle the wire in your hands. After electrifying, the electric soldering iron should be inserted into the soldering iron holder, and check whether welding head will come into contact with wires, schoolbags or other flammable items. During and after heating, do not touch the heated metal part of the soldering iron with your hands to avoid scalding or electric shock. Sponge on the soldering iron frame should be cleaned in advance. When using an electric soldering iron, the soldering head should be tinned first to protect the soldering head, and the tinned soldering head will be white. Excess tin on the welding head can be wiped off the sponge with water on the soldering iron rack. When using the soldering iron, the soldering iron cannot melt the solder when the temperature is too low, or the solder joint is not completely melted and becomes unsightly and unreliable. Too high will "burn" the soldering iron (although the temperature is very high, you can't get tin). In addition, it is necessary to control the welding time. If the soldering iron stays too short, the solder will not melt completely, forming "virtual soldering", while if the soldering time is too long, it is easy to damage the components or tilt the copper foil of the printed circuit board.

We carried out cube welding and practice plate welding operations. In the process of practice, we should constantly sum up and grasp the heating time and tin feeding amount to lay the foundation for the assembly and welding of electronic kits.

2. Assembly of electronic kit

(1) Identification and detection of components: There are many components in the electronic suite, including diodes, triodes, resistors, capacitors, electrets, etc. Before assembly, the components should be identified and tested to see whether the nominal value is close to the measured value and to determine whether the components meet the requirements. It should be noted that the resistance should be distinguished according to the color change, the anode and cathode of diode and electrolytic capacitor, and the connection order of three pins of triode.

(2) Welding of printed circuit board: Assemble the components on the circuit board according to the circuit diagram, and then weld.

(3) Electronic product debugging: If the debugging is unsuccessful, check where the problem lies and then solve it; If the debugging is successful, the test is completed.

Second, the training gains.

1, have a preliminary and systematic understanding of electronic technology theory. Through the practice of electrical and electronic engineering, I learned the welding skills of common components and circuit components, the design, production and process flow of printed circuit board diagram, the working principles and functions of components, and accepted the basic welding training of electronic engineers, so that my basic welding technology and debugging ability were initially trained and exercised, which promoted my comprehensive mastery of electrical and electronic technology and comprehensive development of knowledge and ability, and laid the foundation for future study and work after graduation.

2. Their practical ability has been greatly exercised. During my internship, I exercised my hands-on ability and improved my ability to solve problems. For example, when the telephone was assembled and debugged, it was welded at first, but my diode stopped working when it was connected to an external circuit. Later, I remembered that there was no difference between installing two polyester capacitors, so I changed the positions of the two capacitors and it was all right.

3. More specific gains:

(1) learned how to read the resistance with the color ring, and then used a multimeter to verify whether the reading was consistent with the actual situation, and then nailed the resistance on the paper and marked the data to improve the welding speed in the next step;

② Know what rectifier diode, zener diode, switching diode and light emitting diode are; Learned how to measure diodes and how to identify the positive and negative poles of diodes; When measuring the rectifier diode, the diode can be connected to the buzzer of the multimeter, the red stylus is connected to the positive electrode, and the black stylus is connected to the negative electrode, thus measuring the DC voltage. If it shows 0, it means a short circuit. If 1 is displayed, it means open circuit or reverse direction;

③ Learned how to measure the magnification of triode with multimeter and how to identify the three pins of triode "B", "E" and "C";

(4) Learn to recognize and read capacitors, and ceramic capacitors have no positive or negative electrodes; The long leg of electrolytic capacitor is "+"and the short leg is "-".

⑤ Know what electret, synchronous crystal oscillator and other components have never been touched.

6. Understand the welding principle, technology and skills.

⑦ Understand the general production process of electronic products.

I have improved my teamwork ability. For example, when assembling a telephone, I often need someone to help me hold down the circuit board or hold the tin sucker. Several students on the phone always help each other when they need help and discuss their problems. These processes have greatly cultivated my ability of unity and cooperation.

Third, practical experience.

1, when welding, put the soldering iron at the solder joint for a while, and then send it to solder wire. After the tin wire melts, put the tin wire opposite the soldering iron to weld a better solder joint.

2, sharpening the knife does not mistake the woodcutter. When I first assembled the electronic suite, I was anxious to insert the components into the circuit board in the way I thought was correct and then solder them. The night before I made the electronic kit for the second time, I took out the instructions and read the previous instructions carefully, only to find that there was a suggested installation order on it, and there was a special instruction that the electrolytic capacitor should be installed horizontally to prevent the cover from being difficult to cover. I took out my partially soldered circuit board and saw it. Fortunately, only one electrolytic capacitor was welded, and the other welding elements were not welded in the order recommended in the manual. That night, I studied the schematic diagram for more than two hours before I figured out how to install it. From this incident, I deeply realized how important it is to make good preparations. Most people were anxious to weld well, so they didn't read the instructions carefully, and I rushed to weld with everyone, which wasted more time. In the future, I will definitely pay attention to making full preparations first, so as to know fairly well and improve efficiency.

3. Be careful and patient in everything you do. Both the welding operation and the assembly of electronic kits require patience and care. When welding, two solder joints are welded together carelessly, which is easy to cause short circuit, which requires us to be extra careful. There are many dense solder joints on the circuit board when assembling the electronic kit. Without enough patience, it is impossible to complete the assembly task.

I like the sense of fulfillment and accomplishment brought by the electronic and electrical practice. Since the first class, I have been full of enthusiasm for this course and have been very focused. I like welding cubes, practicing circuit board welding or assembling electronic kits very much. Once I start, I can forget the passage of time. Every time I complete a step, I am as happy as a child and enjoy the "sense of fulfillment" and "sense of accomplishment" brought by this course.

It is not difficult to do anything as long as we put our heart into it. When I first got the components of the test electronic suite, I had a headache because I knew little about other components except resistors. I took out a bunch of capacitors and diodes, but I couldn't tell what capacitors and diodes were. When checking the bill of materials, many things don't know what it is, so we must look at the model specifications on the bill of materials to try to find information in the nominal values on the components. I haven't completely checked the components after the first class of assembling the kit. At that time, I was worried about whether I could finish the assembly task in the next class. In order to complete the task, before the second assembly class, I compared the telephone in the dormitory, carefully studied the instructions, and judged the appearance of many unknown components according to various information. The second assembly class, finally assembled. I almost jumped with excitement when I heard the telephone ring.

6. Practice makes perfect. When I first started soldering the circuit board, the points I soldered were very unqualified, either round or adjacent points stuck together. Later, I learned from my classmates with good skills and asked them. I quickly mastered some skills. The better I weld, the more confident I am. When I finally assemble the electronic kit, I can weld it skillfully.

Training summary and experience 5

How time flies! In the blink of an eye, my long-awaited training week was over. After two weeks of practical training, I learned a lot of knowledge. Looking back, I really gained a lot these days. Under the patient guidance and encouragement of the teacher, the internship task was successfully completed and the expected goals and requirements of the internship were achieved as a whole. This internship gave me a comprehensive and systematic practice opportunity, which consolidated my theoretical knowledge and enhanced my practical operation ability. From practice, I further realize the importance of disassembly and assembly of CNC machine tools for our CNC maintenance specialty. For me, it is not enough to have theoretical knowledge in my future work, but also to be able to apply theory to practice. The teacher's requirements for us are: we must complete all the internship links with a serious and rigorous attitude and a highly responsible spirit.

On the first day when the teacher went to the training room, he told us about the discipline and related events in training. The teacher began to explain to us the basic knowledge of fitter maintenance and the importance of numerical control maintenance. In order to let us know how to do better in the future training, the teacher emphasized that we should take notes when disassembling and asked us to keep a training diary every day. In this training, I learned a lot, such as patience. I was in a hurry to get things done, so we had a problem with the first assembly and added two nuts after the assembly. Accurate assembly is required. If it is not accurate, it will easily lead to safety accidents, resulting in huge economic losses or deaths. We were all very active at first, but later we became a little bored when we dismantled it more often. Then I thought maybe we were just beginning to feel fresh. So I patiently drew a picture. When we assembled the spline of the spindle box, it was always impossible to install it, and then it caught fire, but the more it caught fire, the less it could be installed. Later, I calmed down and put it together. From this incident, I realized that patience is really important.

Confidence is also important. Without confidence, it is difficult to achieve great things. Celebrities have said that confidence is the key to success. It is impossible for our CNC maintenance major to learn future faults or problems in school. Only when we are bold and cautious, and act boldly and confidently on the basis of understanding the principles, can we succeed.

What I learned from this training is how to use new tools. We are now in an era of rapid development. Whether we can use the new tools correctly and efficiently will largely determine whether we can succeed. Secondly, it is our attitude. If we don't have a good attitude towards our work, it's hard to be recognized no matter how high our ability is. It is attitude that determines everything.

In this training, what I have learned most is the combination of theory and practice, and practice is the only criterion for testing truth. Theoretical knowledge is very important, but theory without practice is empty talk. Only by truly combining theory with practice and applying theory to practice can we show our talents better. I used to think I could read and understand. After this training, I finally understand that the knowledge I have not practiced does not belong to you. As the saying goes, "It is better to believe in books than to have no books." We should read good books, not dead books. What society needs now is people with strong hands-on ability, not people with good theory, which is even more important for our higher vocational students. The goal of our school is to cultivate talents with first-class professional skills.

During the training, I think I also have many shortcomings, such as my work attitude is not positive enough and my study is not serious enough. I believe that through my efforts, I will definitely get rid of these shortcomings in the future. I firmly believe that the practical experience gained through this period of internship will benefit me for life, and will be constantly verified in the actual work after graduation. I will continue to understand and appreciate what I have learned in my internship, and apply my theoretical knowledge and practical experience to my future practical work to fully demonstrate my personal value and life value. Strive to realize my ideal and bright future. How can you see a rainbow without experiencing wind and rain! "I believe that my firm confidence and firm will will surely realize my beautiful ideal and embark on my own road to success.

Training summary and experience 5 selected related articles:

★ Training summary 10 excellent model essays were selected.

★ Training experience of more than 500 words.

★ The latest selection of 5 articles on internship summary and experience.

★ Training experience of more than 500 words.

★ Training Summary General Edition 5 model essays

★ 5 essays on college students' internship experience

★ Five selected models of entrepreneurship training experience in 2020.

★ Selected five encyclopedias of college students' internship experience

★ Selected Summaries of 5 Cognitive Practices

★ Accounting training summary 5 selected articles